Driver Gear

Sparco Air Pro RF-5W: Retro Inspired From 1977 The Air Pro RF-5W 1977 is a painted version of the Sparco Air Pro RF-5W. This retro inspired helmet has a white base with blue or red stripes beneath a durable clear coat finish. The Sparco Air Pro RF-5W 1977 features a carbon-kevlar and fiberglass construction with a wider eye opening that can be used for open wheel or closed cockpit driving. Multiple exterior vents increase air circulation throughout a redesigned interior. This interior has channels that cool the driver, plus additional channels routing air towards the visor to reduce the chance of visor fogging. The Sparco Air Pro RF-5W 1977 has removable, washable padding that can be repositioned for a comfortably personalized fit. All interior seams have been removed from areas where greater pressure is exerted on the head. The Air Pro RF-5W 1977 has been designed to accommodate a drink tube and an intercom system (both sold separately). Available in white with blue or red stripes, the Sparco Air Pro RF-5W 1977 has HANS posts pre-installed. Snell SA2020 and FIA 8859-2015 approved. Sparco Racing Helmets History of Innovation and Excellence Today's Sparco auto racing helmet line is the result of over 40 years of research and development experience, including wind tunnel testing. The new range was designed to meet the requirements of both Snell SA2020 and FIA 8859-2015 ratings. To meet these requirements Sparco introduced new innovations for driver safety and comfort. All auto racing shells now have layers of Carbon-Kevlar for greater strength. Sparco helmets have been wind-tunnel tested to maximize exterior vent placement and air flow. The EPS interiors and padding have also been redesigned for increased air flow and driver comfort. Sparco also introduced a new size: Medium/Large. This M/L size takes advantage of using the smaller helmet shell which is lighter and more compact. Sparco Air Pro RF-5W 1977 Auto Racing Helmet Details: Manufacturer: Sparco Manufacturer part no.: 003375 Snell SA2020 and FIA 8859-2015 approved Painted retro design in either red or blue Lightweight carbon-kevlar/fiberglass construction Pre-molded interior to accommodate accessories like drink tubes and an intercom system (accessories sold separately) New Medium/Large size uses lighter, more compact shell Anodized aluminum chin strap hardware Removable, washable lining Wind tunnel optimized venting with anti-fog air channels Additional Sparco RF-5W Pro helmet shields available here. Sparco Air Pro RF-5W 1977 Auto Racing Helmet Sizes: 54cm (X-Small)) 55-56cm (Small) 57-58cm (Medium)) 59cm (Medium/Large)) 60cm (Large)) 61cm (X-Large)) 62cm (XX-Large)) Proper Helmet Fitment and Head Measurement The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

Bell GT6 Pro Helmet FIA8859-2024 / SA2025 The Bell GT6 Pro is a professional-grade racing helmet designed for serious drivers who demand uncompromising protection and clarity. Featuring dual homologation to FIA8859-2024 and Snell SA2025 standards, this helmet is built for top-level competition while offering the comfort and ventilation needed for endurance events and track days. Advanced safety and performance in one package Dual certification Certified to both FIA8859-2024 and Snell SA2025 standards, the GT6 Pro is approved for worldwide motorsport competition and ready for years of racing to come. Lightweight composite shell Engineered with a strong composite shell construction, the GT6 Pro delivers excellent impact protection while keeping weight down to reduce fatigue over long stints behind the wheel. Optimized ventilation system Multiple intake and exhaust vents maximize airflow through the helmet, helping drivers stay cool and focused even in the most demanding racing conditions. Wide eyeport and anti-fog visor The helmet’s large eyeport provides exceptional field of view, paired with a standard SE06 double screen anti-fog visor for clear vision in every condition. BELL GT6 PRO SA2025 AUTO RACING HELMET SIZE CHART BELL GT6 PRO SA2025 AUTO RACING HELMET FIA8859-2024 / SA2025 FAQs What certifications does the GT6 Pro carry? The GT6 Pro is dual certified to FIA8859-2024 and Snell SA2025 standards, making it approved for a wide range of international and domestic racing series. Does the GT6 Pro support HANS devices? Yes, the helmet comes HANS-ready with integrated anchor points for use with all popular head and neck restraint systems. What visor is included with the helmet? The GT6 Pro includes an SE06 double screen anti-fog visor for superior clarity and fog resistance. Who is the GT6 Pro best suited for? This helmet is designed for professional and amateur drivers competing in FIA or Snell-sanctioned events, as well as track-day enthusiasts looking for maximum protection and visibility. The Bell GT6 Pro FIA8859-2024 / SA2025 delivers world-class safety and professional performance in a sleek, lightweight design — the ultimate choice for serious racers.

Bell XR7 Pro Helmet SA2025 The Bell XR7 Pro SA2025 is a cutting-edge racing helmet built to deliver uncompromising protection, comfort, and performance for drivers at every level. With a sleek aerodynamic profile, advanced ventilation system, and Snell SA2025 certification, it’s designed to keep you safe and focused whether you’re turning laps at a track day or competing in sanctioned motorsport events. Maximum protection with advanced performance features Lightweight shell design The XR7 Pro features a carbon composite shell engineered to reduce weight while maintaining superior impact resistance, helping minimize driver fatigue during long sessions. Snell SA2025 certified Meeting the latest Snell SA2025 safety standard, the XR7 Pro provides confidence that you’re equipped with a helmet tested to the toughest requirements in motorsport. Optimized ventilation An advanced venting system channels airflow across your head and face, keeping you cool under pressure and maintaining clear vision during intense driving conditions. Race-ready fit and features Equipped with an SE07 anti-fog visor, HANS-ready anchor points, and a wide eyeport for superior visibility, the XR7 Pro integrates seamlessly with your gear for a secure and professional fit. BELL XR7 PRO SA2025 COMPOSITE HELMET SIZE CHART BELL XR7 PRO SA2025 COMPOSITE HELMET FAQs What does Snell SA2025 certification mean? Snell SA2025 is the newest motorsport helmet standard, ensuring enhanced impact protection, fire resistance, and compatibility with head and neck restraint systems. Is the Bell XR7 Pro compatible with HANS devices? Yes, the XR7 Pro is HANS-ready with integrated mounting points, making it fully compatible with popular head and neck restraint systems. Does the helmet include an anti-fog visor? The XR7 Pro comes standard with an SE07 double screen anti-fog visor to maintain clear visibility in all conditions. When will the Bell XR7 Pro SA2025 be available? The helmet is available for pre-order now, with deliveries expected starting late 2025 in time for the new certification standard. Step into the next generation of motorsport safety and performance with the Bell XR7 Pro SA2025 — engineered for drivers who demand nothing less than the best.  

Bell XD-7 Pro Helmet SA2025 The Bell XD-7 is the next evolution of dirt and off-road helmets, designed for drivers who demand uncompromising safety and airflow in the harshest conditions. Certified to Snell SA2025 and engineered to meet FIA 8859-2024 standards, the XD-7 takes the proven GTX3 platform and refines it for the new generation of racers. Advanced Protection and Dirt-Ready Ventilation From dusty off-road courses to high-speed oval tracks, the Bell XD-7 delivers exceptional performance. Its improved ventilation system maximizes airflow while filtering dust and debris, keeping drivers cool and focused lap after lap. Features • Dual certifications ensure long-term eligibility: Snell SA2025 and FIA 8859-2024 compliance for racing worldwide. • SmartLock visor system allows easy one-hand operation, securing the shield even with gloves on and offering a half-open lock for added airflow. • SE07 Double Screen Anti-Fog shield prevents fogging, ensuring crystal-clear vision in the most challenging conditions. • Aerodynamic rear spoiler improves high-speed stability, reducing lift and buffeting. • Available in lightweight composite or premium carbon fiber shells, giving drivers a choice between affordability and ultimate performance. Bell XD-7 Helmet SA2025 FAQs: Is the Bell XD-7 FIA approved?The XD-7 is built to meet FIA 8859-2024 standards and holds Snell SA2025 certification, making it eligible for racing through 2035. What makes the XD-7 different from the previous GTX3?The XD-7 refines the GTX3 design with updated ventilation, the SmartLock visor system, and certification to the latest standards. Does the XD-7 include a visor?Yes, the helmet comes standard with Bell’s SE07 anti-fog visor, compatible with tear-offs and forced-air kits. When will the Bell XD-7 ship?Pre-orders are expected to begin shipping between Q4 2025 and Q1 2026, depending on production schedules. Secure your Bell XD-7 Helmet SA2025 today and be ready for the next decade of racing with the latest in Bell’s dirt-ready technology. Bell Racing Helmet Size Chart  

OMP Tecnica Hybrid Driver Suit The OMP Tecnica Hybrid is Professional high spec two-layer race suit which benefits from traditional Nomex flame retardant material paired with high tech printed inserts and additional embroidered detailing. The external layer is a shiny Nomex material providing a modern look while the inner layer is a soft knit Nomex for high levels of comfort. Floating sleeves with elastic bellow, knitted elastic insert on the back for maximum freedom of movement. Shaped collar with inner soft knitted fabric, adjustable velcro's belt, ultra-flat anti-rubbing seams and soft insert on groin guarantee maximum comfort. Breathable inserts on hips and under the sleeves, pockets with diagonal cut on front, fishbone quilting. OMP Tecnica Hybrid Driver Suit Details Two-layer suit with 400 g/m² material weight FIA 8856-2018 approved Shiny outer Nomex material for superb looks Soft knit Nomex lining material provides high levels of comfort Breathable elasticated inserts on the lower back, hip and sleeve vastly improve mobility and comfort Ultra flat, anti-rubbing seams eliminate pressure points for an improved fit and feel Fully-floating sleeves for less restrictive arm movements The OMP Tecnica Hybrid race suit offers fully floating sleeves and an elasticated insert on the lower back and breathable inserts on the hips and sleeves which all provide increased comfort and flexibility. The suit also features a shaped collar with soft knit fabric, adjustable Velcro belt and ultra-flat anti rubbing seams and a soft groin insert also aids comfort between the legs. The suit is finished in vertical fishbone quilting with hidden side pockets. Available in a range of complimenting colors. OMP Tecnica Hybrid Driver Suit Size Chart

Sparco Air Pro RF-5W Auto Racing Helmet The current Sparco auto racing helmet line is a result of over 40 years of research and development experience, including wind tunnel testing and work with some of history's great racing teams. Sparco's latest Air Pro RF-5W helmet lineup was designed specifically to meet the requirements of the Snell SA2020 and FIA 8859-2015 ratings. Sparco has introduced several innovations for driver safety and comfort. All shells now have layers of carbon-kevlar for increased strength without added weight. The helmets have been wind-tunnel tested to optimize exterior vent placement and air flow. And new EPS interiors and padding were redesigned for increased airflow and driver comfort. Sparco also introduced a new Medium/Large helmet size taking advantage of their smaller, lighter, more compact shell. Check out Sparco Air Pro RF-5W helmet shields here. Sparco Air Pro RF-5W Auto Racing Helmet Details: Manufacturer: Sparco Manufacturer part no.: 003375 Snell SA2020 and FIA 8859-2015 approved Lightweight carbon-kevlar/fiberglass construction Wind tunnel optimized venting with anti-fog air channels New "Medium/Large" size uses lighter, more compact shell Anodized aluminum chin strap hardware Removable, washable lining Pre-molded interior accepts drink tubes and intercom system (sold separately) Sparco Air Pro RF-5W Helmet Colors & Sizes: 54cm (X-Small) to 62cm (XX-Large) Gloss White or Matte Black The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

OMP FIRST Evo Racing Fire Suit FIA 8856-2018 HOMOLOGATED Two layer overall with modern two-tone design featuring an excellent quality/comfort/price ratio. OMP First Evo two-layer suit with modern two-tone design featuring an excellent quality/comfort/price ratio. External layer in aramidic fiber for high use and washing resistance, inner fabric in soft knitted material. Floating sleeves, antirubbing ultra flat seams. Elastic inserts on the back and in the groin for better comfort and flexibility. Breathable inserts on the sleeves plus a comfortable hidden inner pocket. NEW MODEL, LIGHTER THAN PREVIOUS MODEL FIA increases the safety in motorsport with the release of new standard FIA 8856-2018 for fire retardant racewear.The new standard establishes the requirements for design and performance in terms of increased protection against flames and against heat transmission, mechanical resistance and tensile strength. OMP FIRST EVO DRIVER RACE SUIT PROTECTION Certified to FIA 8856-2018 homologation standard. Lightweight and breathable two-layer suit OMP FIRST EVO DRIVER RACE SUIT KEY FEATURES Two-layer suit construction Soft-knitted inner material Floating arms with elastic bellows Ultra-flat anti rubbing seams Classic-fit design. Weight: 385 g/m2

Arai Auto Racing GP-5W SA2020 Helmet The Arai GP-5W SA2020 helmet is perfect for stock car, sedan, and rally drivers. The GP-5W is a favorite because of its tall 90mm (~3.5”) top-to-bottom eye port. The GP-5W uses its own exclusive shield with this larger opening. The Arai GP-5W is Snell SA2020 certified with M6 washer/nuts installed at the factory. Drivers of any experience level will be able to easily install their Head and Neck Restraint system anchor posts (sold separately). The Arai Auto Racing GP-5W SA2020 also comes with the FIA-8859-2015 certification sticker found on the shell’s interior lining. Arai Advanced Technology ScLc Helmet Shell The Arai GP-5W Helmet is built with Arai's exclusive, very-lightweight ScLc (Super Complex Laminate Construction) shell technology. This ensures a low overall weight to offset the added weight of the helmet’s larger shield. Innovative GP-5W Racing Helmet Shell Shape The Arai Auto Racing GP-5W helmet SA2020 helps reduce fatigue for the driver due to its more natural head shape, smaller shell size, and lower center of gravity to assist with balance and stability. Interior Fit of the Arai GP-5W The Arai Auto Racing GP-5W Helmet SA2020 is designed to closely match the shape of the human head, allowing for a snug, yet comfortable, fit. Arai has developed this “natural” shape over more than 50 years of helmet design research and refinement. Taller Eye Port for Increased On-Track Vision Sedan drivers will appreciate the larger 90mm eye port, top to bottom. A visor peak is available for drivers not needing a shield on the The Arai Auto Racing GP-5W Helmet SA2020. ARAI GP-5W Removeable/Replaceable Cheek Padding Low maintenance, easy-to-clean cheek pads are removable, washable, and replaceable with pads of varying thickness to provide a snug, safe fit. Threaded for M6 HANS Anchors The FIA-8859-2015 certified GP-5W helmet has M6 threaded washer/nuts with 6mm threads pre-installed. This convenient feature lets the driver use the anchor system that works best with their Head and Neck Restraint. The anchor posts are made to rest flush on the helmet surface, accepting a variety of HNR anchor systems. Extraordinary Air Flow and Ventilation Closed-cockpit drivers need greater airflow when racing. The upper ventilation system of the GP-5W SA2020 helmet incorporates two exhaust vents and two large intake ducts to help keep the driver cool and comfortable. Multiple Shields Available for the Arai GP-5W A variety of shields for the Arai GP-5W are available here. Arai anti-fog shields come in clear, light tint and dark smoke. Standard shields also come in clear, light tint and dark smoke. The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship to you with signature required for delivery.

Alpinestars GP Race v2 Boot Cuff Driver Suit The GP Race v2 Suit is a multi-layer suit developed for all-round drivers racing in advanced competitions. Compliant with FIA Standard 8856-2018, the GP Race v2 Suit has an athletic regular fit and has a three-layer construction; one layer of aramidic twill and two layers of aramidic base knit. This assembly offers an increase of 5% in breathability performance, while still maintaining a light weight at 400g/m2. The suit also incorporates knitted stretch panels for maximum comfort on the armholes, lower back and crotch areas, with a larger and longer back panel to really aid driver flexibility and range of movement, while the internal flat seam, fully floating arm and extended shoulders provide even greater levels of driver comfort. Alpinestars GP Race v2 Boot Cuff Driver Suit Protection Certified to the new FIA 8856-2018 homologation standard. Alpinestars fully floating arm construction with stretchable knit fabric ensures minimal material resistance while driving. Sold with laundry bag for convenience and effective material fiber protection. Alpinestars GP Race v2 Boot Cuff Driver Suit Construction Multi-layer lightweight suit incorporating knitted stretchable panels for maximum comfort and excellent breathability. Aramidic knitted stretchable panels on back, waist and crotch for enhanced comfort and ease of movement. Ergonomic collar with soft knitted lining for extended coverage and maximum comfort. 100% Aramidic outer shell fabric for exceptional heat and flame-resistant proprieties. Adjustable collar and belted waist ensure a precise fit. Anatomical arm, leg and torso patterned paneling for an optimum fit in the driving position. Alpinestars exclusive shoulder epaulette construction provides an effective feature for the extraction of the driver in the event of a crash. Alpinestars GP Race v2 Boot Cuff Driver Suit Key Features Ribbed, stretchable wrist and foot cuffs for optimum comfort. Premium YKK double slidered zipper personalized for a versatile and customizable fit. Thigh pockets for convenient, peace-of-mind storage. Regular fit design. Weighs 400 g/m2. Alpinestars GP Race v2 Boot Cuff Driver Suit Size Chart

Alpinestars GP Race v2 Driver Suit The GP Race v2 Suit is a multi-layer Driver Suit developed for all-round drivers racing in advanced competitions. Compliant with the new FIA Standard 8856-2018, the GP Race v2 Suit has an athletic regular fit and has a three-layer construction; one layer of aramidic twill and two layers of aramidic base knit. This assembly offers an increase of 5% in breathability performance, while still maintaining a light weight at 400 g/m2. The suit also incorporates knitted stretch panels for maximum comfort on the armholes, lower back and crotch areas, with a larger and longer back panel to really aid driver flexibility and range of movement, while the internal flat seam, fully floating arm and extended shoulders provide even greater levels of driver comfort. Alpinestars GP Race v2 Driver Suit Protection Certified to the new FIA 8856-2018 homologation standard. Alpinestars fully floating arm construction with stretchable knit fabric ensures minimal material resistance while driving. Includes laundry bag for convenience and effective suit fiber protection. Alpinestars GP Race v2 Driver Suit Construction Multi-layer lightweight suit incorporating knitted stretchable panels for maximum comfort and excellent breathability. Aramidic knitted stretchable panels on back, waist and crotch for enhanced comfort and ease of movement. Ergonomic collar with soft knitted lining for extended coverage and maximum comfort. 100% Aramidic outer shell fabric for exceptional heat and flame-resistant proprieties. Adjustable collar and belted waist ensure a precise fit. Anatomical arm, leg and torso patterned paneling for an optimum fit in the driving position. Alpinestars exclusive shoulder epaulette construction provides for the extraction of the driver in the event of a crash. Alpinestars GP Race v2 Driver Suit Key Features Ribbed, stretchable wrist and foot cuffs for optimum comfort. Premium YKK double slidered zipper for a versatile and customizable fit. Thigh pockets for convenient, peace-of-mind storage. Regular fit design. Weighs 400 g/m2.   Alpinestars GP Race v2 Driver Suit Size Chart

Bell Racing Helmets GTX.3 SA2020 Composite With its refined, aerodynamic design and lightweight carbon composite shell, the Bell Racing Helmets GTX.3 Composite SA2020 helmet provides the best performance and pro features for open wheel, open compartment, karting, formula and dirt track racers. This Bell GTX.3 Composite SA2020 has an integrated shield and dual screen anti-fog (DSAF) visor with rear-facing vents which are ideal for these forms of racing, allowing for air exchange and unobstructed vision without worrying about dust and dirt. Bell Racing GTX.3 Auto Racing Helmet Features Snell SA2020 and FIA 8859-2015 homologation Includes clear SE03 3mm DSAF shield (SV SE03/05 pivot system) with DSAF anti-fog insert Sleek aero styling with integrated wing Front chin bar Gurney ("duckbill") improves high-speed aerodynamic performance Venturi airflow system lets fresh air in, hollow synthetic rubber gasket seal keeps dirt, water and dust out High-strength, lightweight carbon-composite construction using new high-pressure molding system Multi-piece, multi-density high-impact custom bead absorbing liner for low- and high-velocity impact protection Ultra-plush grey Comfort-Max FR® interior fabric wicks away moisture Install integrated drinking tube and radio microphone systems with the integrated face piece channels Multi-density foam interior and contoured cheek pads offer a professional fit Standard-sized eye port M6 terminal hardware and hex wrench for Head and Neck Restraint devices Additional visor shields for the Bell Racing GTX.3 available here.

Sabelt Challenge TS-2 Driver Suit The Sabelt® Challenge TS-2 is lighter than it’s predecessor at only 360 grams per square meter! This model features a classic racing look and our excellent high quality tailoring. A lower neck collar, pre-curved arms, full-floating sleeves for complete range of motion, and an anti-bubbling twill external layer with pockets are a few of the features you’ll enjoy in this Nomex® fiber woven fire-retardant suit. Hidden shoulder handles under the (also fire retardant) embroidered Sabelt® logo make hanging and storing easier than ever. Available in sizes 46 – 66. Colors available are black/white, red, white, blue, and black/yellow. SABELT CHELLENGE TS-2 DRIVER RACE SUIT TECHNICAL DETAILS FIA 8856-2018 Fabric Weight 360 g/m² Nomex® Fire-Retardant – Anti-Bubbling External Layer Lower Neck Collar Internal Elastic Waist Band, Outer Waist Belt External Pockets Sizes 46 – 66 SABELT CHALLENGE TS-2 DRIVER RACE SUIT SIZE CHART