Driver Gear

The Arai GP-7 SA2020 Auto Racing Helmet A driver favorite, the Arai GP-7 SA2020 helmet combines the most popular Arai features with new, improved upgrades. The Arai GP-7 is constructed with Arai’s own PBcLc (Peripherally Belted Complex Laminate Construction) helmet shell with the same shell shape as the top-of-the-range GP-7SRC model used in Formula 1. New ventilation, a soft EPS liner, and a wider eye port for optimized peripheral vision are part of this new shell which gives the driver notable strength and flexibility. Replaceable cheek pads make racing comfortable for any driver, as do the three larger, closeable intake vents and two larger exhaust vents on the ventilation system. The Arai GP-7 helmet is Snell SA2020 certified with factory-installed M6 washers/nuts. Drivers of any skill level can install their own Head and Neck Restraint system using a 6mm bolt. The FIA-8859-2015 certification sticker is applied to the interior liner of the helmet. Arai Positive Shield Latch Simple yet effective, the positive latch mechanism on the Arai GP-7 SA2020 helmet gives the driver solid shield latching, but is seamlessly integrated into the standard shield system for ease of use. New Shield Pivot for the Arai GP-7 The Arai GP-7 SA2020 features new shield pivot hardware with improved aerodynamics based on the updated track slider design. An increased peripheral field of view is featured on the 6 series, which surpasses the 5 series in visibility. The wider eye port, shield, and pivot hardware were all developed on the RC and adapted to the Arai GP-7 SA2020 helmet. Additional Arai GP-7 visor shields available here. ARAI GP-7 Increased Ventilation and Comfort Increased airflow is key to the GP-7 SA2020 helmet’s design. This includes bigger, closeable intake vents with large 10mm holes in both front and rear. Larger rear vents also provide better airflow. M6 HANS Anchors for the Arai GP-7 Helmet Drivers of all skill levels will appreciate the integrated, pre-installed M6 threaded washer/nut with 6mm threads which accepts a range of Head and Neck Restraint devices. A flat surface area around the mounting nut will let the anchor post base to rest flush along the surface of the helmet and around the full perimeter of the anchor base. FIA-8859-2015 certification sticker applied to the interior liner material. Featuring a Redesigned Chin Bar The Arai GP-7 SA2020’s new, ergonomic chin bar and ridge at the bottom edge of the shell lowers the center of gravity and increases the structural integrity of the helmet. Additional improvements include a rise in the shell above the shoulders for increased clearance. E-Ject Ready Crown Pad for Safer Removal Arai's optional E-Ject system can be easily accommodated via a pre-cut pocket under the helmet’s crown pad. This system makes removal of the helmet by track safety crew easier and less likely to jostle an unconscious driver's head in the event of an accident Arai GP-7 Auto Racing Helmet Details: Manufacturer: Arai Helmet Manufacturer part no.: GP7SA20 Snell SA2020 certified PBcLc (Peripherally Belted Complex Laminate) shell construction Removable chin liner to accommodate a drink system Sizes: 54cm (X-Small) to 60cm (Large) Exterior colors: Gloss White or Black Frost A Note About Helmet Fitment and Head Measurement The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

FluidLogic Flush 360 System (Non Forced Air) The Pod & Flush 360 Kit is designed for users that do not use forced air or simply chose not to build onto their existing forced air system. The kit comes with the Pod as described above along with the Flush 360 assembly to allow the user to quickly connect/disconnect their hydration using the power of Maglock®. The Flush 360 quickly and easily installs onto the helmet in minutes with no drilling or modifications required. The Flush 360 Kit comes with everything needed to connect the existing fluid source to set up one complete helmet and seat in the vehicle.

Sparco Sky RF-7W Carbon SA2020 The Sparco Sky RF-7W has a carbon fiber outer shell reinforced with layers of carbon-kevlar composite. The RF-7W Carbon includes a wider eye opening making it ideal for both open-wheel and closed-cockpit racing. Multiple exterior vents increase air circulation throughout a redesigned interior. Integrated channels not only direct cool air onto the driver's head, some also route air towards the visor reducing the chance of fogging. The Sparco Sky RF-7W Carbon has removable, washable interior padding that's easy to reposition for a customized, comfortable fit. All interior seams have been removed from areas where pressure is exerted on the head. The Sparco Sky RF-7W has been designed to accommodate a drink tube and an intercom system (each sold separately). Available in sizes X-Small to X-Large (including new Medium/Large size using Sparco's smaller, lighter shell) with a red or black interior. The Sparco Sky RF-7W Carbon Fiber has HANS posts pre-installed and is both Snell SA2020 and FIA 8859-2015 approved. Additional Sparco Sky RF-7W Carbon Fiber helmet shields available here. Sparco Sky RF-7W Carbon Fiber Helmet Details: Snell SA2020 and FIA 8859-2015 certified Wind tunnel optimized venting with anti-fog air channels Lightweight carbon fiber with carbon-kevlar base layers Choose red or black interior lining color Removable, washable lining Pre-molded interior to accommodate drink tube and intercom system (sold separately) New "Medium/Large" size uses Sparco's lighter and more compact shell HANS posts pre-installed Anodized aluminum chin strap hardware How To Measure Your Head Properly The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

HANS Pro Ultra Lite The Ultimate Carbon Fiber HANS Device The HANS Pro Ultra Lite 20 Degree is both SFI 38.1 and FIA approved. With aerospace-grade carbon, the HANS Pro Ultra Lite Head Restraint is over 100 grams lighter compared to its Ultra counterpart. Not only does it save on weight, its smaller size helps with entry and exit from even smaller, tighter racecars. The HANS Device Pro Ultra Lite Head Restraint is constructed of 100% carbon fiber with a hollow core for increased weight reduction without sacrificing strength. Its sliding tethers offer superior visibility for the driver. Includes HANS posts (button-style) for your SA2015 helmet. Thunderhill carries only dual-certified FIA/SFI HANS devices to ensure all customers are getting a HANS device that will work with their sanctioning body.

KC7-CMR Lewis Hamilton Karting Helmet - 2022 | FIA CMR2016 Bell joined forces with Formula 1 World Champion Lewis Hamilton to create this KC7-CMR karting helmet, finished in his unmistakable yellow and purple design. Built for kart racers who demand professional-level safety and Hamilton fans who want the real deal, this helmet blends Bell’s legendary construction with exclusive graphics straight from the F1 grid. Certified to FIA CMR2016 standards, it’s lightweight, aerodynamic, and fully loaded with premium accessories. Lewis Hamilton’s signature helmet for karting Features • Lightweight carbon composite shell with weights as low as 1186 g (sizes 52-56) and 1230 g (sizes 57-59) • Based on the F1-grade Bell HP7 design for superior aerodynamics and comfort • Advanced ventilation system with 14 intake and extraction channels • Multi-density liner for optimal impact absorption across different velocities • Hollow synthetic rubber gasket seal blocks out air, dust, and water • Includes $300+ of accessories: multi-layer clear purple visor, top/side intakes, rear spoiler, Bell HP helmet bag, and hex wrench • Double Screen Anti-Fog (DSAF) visor insert for maximum visibility in all conditions • Comfort-plus interior with removable cheek pads and moisture-wicking lining • Aerodynamic accessories available separately for fine-tuned performance Why choose the KC7-CMR Lewis Hamilton Helmet? This isn’t just another karting helmet—it’s Hamilton’s signature edition. Designed with Bell’s paint team to match his personal F1 helmet, it brings pro styling and engineering to the kart track. Certified to FIA/Snell CMR2016 standards, it’s specifically built for drivers under 18 but remains a smart, lightweight option for adults in karting or low-speed motorsport. With premium accessories included, it’s an unbeatable package for performance and fan appeal. KC7-CMR Lewis Hamilton Karting Helmet FAQs: Is this helmet approved for karting? Yes, the KC7-CMR Lewis Hamilton helmet is certified to FIA/Snell CMR2016 standards, the required homologation for youth karting. What accessories are included? Each helmet comes with a multi-layer clear purple visor, top and side air intakes, a rear spoiler, Bell HP helmet bag, and hex wrench—over $300 worth of extras. Can adults use this helmet? While designed for younger drivers, adults in karting and similar motorsport disciplines can also benefit from its lightweight design and safety certification. How does this compare to standard KC7-CMR helmets? The Lewis Hamilton edition features exclusive yellow and purple graphics, plus upgraded accessories, making it the premium choice in the KC7-CMR line. What sizes are available? Helmet weights are 1186 g (+/-3%) for sizes 52-56 and 1230 g (+/-3%) for sizes 57-59. Step into Lewis Hamilton’s shoes and onto the karting grid with the Bell KC7-CMR Lewis Hamilton Karting Helmet. Order now to race in world champion style with unmatched performance.

Sparco Prime SPEC1 Driver Suit SAVE $$$ The Sparco Prime Spec 1 Driver Suit is a USA exclusive suit that improves on Sparco’s original version of the Prime SP-16. The first thing you will notice is the new suit design. The Prime Special Edition adds 2 new multi-color options. In addition to the new design, the Prime Special Edition adds a few extra features, such as full floating sleeves, belt, and internal pockets. The Sparco Prime Spec 1 Driver Suit was made in collaboration with the Mclaren Formula One team; additionally, it is the lightest FIA approved racing suit in the world. The Prime SP-16 Special Edition has unparalleled technological features created in Sparco’s R&D laboratories. The project involved optimizing every single detail in terms of material and construction. This includes an ultra slim zipper, soft seamless Nomex/Vicosa® wrists, and ankle cuffs, the neck and shoulder pads were further reduced, a thinner thread was used and stitching flattened even more. The Sparco Prime Spec 1 Driver Suit features 3-layer construction using proprietary Sparco technology. The third outer layer is a double-faced mesh made from original DuPont Nomex Comfort® was woven using the Kompact® system. The material contains a high percentage of antistatic fibers which provide extremely effective antistatic properties as well as breathability. The Sparco Prime Spec 1 Driver Suit features pre-curved arms and legs as well as strategic stretch panels which give the suit unbelievable comfort. The Prime SP-16 Special Edition is available in 2 color options and in sizes 48-66. TECHNOLOGY FIA 8856-2000 Approved Lightest FIA approved suit in the world Exclusive DuPont Nomex® fibers provide superior fire protection and comfort Pre-curved Arms and Legs Strategic Stretch panels Seamless arm and leg

Sparco Victory 2023 Driver Suit FIA 8856-2018 The lightweight and breathable Sparco Victory 2023 racing suit is feature packed with lightweight HOCOTEX fabric construction, comfort stretch panels, and is dual SFI 3.2/5a and FIA 8856-2018 homologated. Built in Italy with pride, the new lightweight and breathable Sparco Victory 2023 brings the performance of competitor's suits that have double the cost to weekend racers. It's hard to improve on a classic, but Sparco has done just that with the updated Victory 2023 racing suit! Built from the popular Victory racing suit that brought HOCOTEX technology at the $1050 price point. Largely keeping the popular Victory classic design with modern color options, the new Victory 2023 suit takes things a step further with an improved cut, style, and fit. An improved stretch panel on the lower-back further improves mobility, while preformed sleeves maintain excellent steering performance. Sparco's unique HOCOTEX technology makes use of an intricate honeycomb structure that contains thousands of protective microcapsules built into a super-thin and breathable fabric weave. Twice as breathable as other entry-level suits, these insulating compartments replace the multi-layer fabric construction found in every other suit on the market, all while maintaining dual SFI 3.2A/5 & FIA 8856-2018 certifications for zero compromise in protection! FEATURES: Soft and Lightweight Two times more breathable than a standard suit Single Layer Construction, Multi-Layer Protection Hidden front pockets Full-floating, pre-formed sleeves with stretch panels Additional stretch gusset in shoulder and armpit sections 3 Years of Research and Development HOCOTEX® Patented Sparco Technology – Made in Italy Only single layer SFI 3.2A/5 suit on the market Rating: FIA 8856-2018 & SFI 3.2a/5

Bell Racing Helmets KC7-CMR "Lewis Hamilton" Karting Helmet F1 World Champion Lewis Hamilton designs special edition Bell karting helmet Bell Racing Helmets teamed up with F1 Multiple World Champion Lewis Hamilton to develop a special edition “Lewis Hamilton” KC7 CMR Karting helmet for the 2019 racing season. Lewis Hamilton worked personally with Bell’s in-house custom paint team to create a custom graphic for the KC7 CMR with the signature elements and colors of his F1 design. This special edition KC7 CMR features a multi-layer red SE07 2mm visor, clear top and side air intakes, clear rear spoiler and HP helmet bag. The KC7-CMR, an ultra-lightweight youth karting helmet, incorporates the same technology, aerospace materials and construction methods used to build the advanced Bell HP7 helmet used by Lewis Hamilton in F1 competition. The KC7-CMR's sleek, aerodynamic design features an advanced ventilation system that can be used with or without air intakes to maximize cooling and a double screen anti-fog (DSAF) visor to eliminate fogging. Homologated to the Snell/FIA CMR standard and certified for global competition, the KC7-CMR is designed to minimize weight for karting drivers under the age of 18. The Bell KC7-CMR is the perfect helmet for the next generation of champions as they start their racing career in karting. SPECIFICATIONS: Ultra lightweight helmet featuring a carbon/fiberglass shell: 2.6 lbs. in sizes 54 - 56cm and 2.7 lbs. in sizes 57 - 59cm (+/- 3%). Advanced multi-density, multi piece liner to maximize energy absorption and impact performance. Cutting-edge style based on the Bell HP7 used in F1. Graphic design created by Lewis Hamilton reflecting his F1 helmet livery. Powerful top and chin bar ventilation thanks to a total 14 air intake and extraction channels. Optimized shield design resulting in improved aerodynamic behavior and energy absorbing capacities. Multilayer red SE07 2mm visor. Clear top and side air intakes mounted on the helmet. Clear spoiler mounted on the helmet. Non-fireproof lining for extra durability. Snell-FIA CMR-2016 approved. Sizes: 54 to 59 cm. Snell-FIA CMR-2016 approved.

Bell MAG-10 Rally Pro Open Face Helmet Experience the pinnacle of motorsports protection with the Bell open face helmet, fully compliant with FIA 8856-2015 homologation standards. Crafted from a lightweight yet robust fiberglass-carbon composite shell, this helmet promises durability without compromising on comfort. Key features include the state-of-the-art ZeroNoise intercom set, a built-in Nexus socket with a removable cover, and a detachable chin bar designed specifically for a microphone arm. For added convenience, it comes with easily removable cheek pads. The adjustable peak paired with an integrated anti-scratch dark smoked sunscreen ensures optimal vision in varying conditions. Plus, for enhanced safety, it's fitted with HANS clips, making it a top choice for motorsports enthusiasts who prioritize both style and safety." Bell Mag-Pro Rally Helmet Features & Options: Compliant with FIA 8856-2015 homologation standards Lightweight fiberglass-carbon composite shell ZeroNoise intercom set integration Built-in Nexus socket with removable cover Detachable chin bar for microphone arm flexibility Easily removable cheek pads for comfort customization Adjustable peak for varied lighting conditions Integrated anti-scratch dark smoked sunscreen Equipped with HANS clips for enhanced safety Designed for elite motorsports enthusiasts

Stilo ST5 GT Composite Helmet SA2020 Stilo ST5.1 GT: Still #1 With Integrated Flexibility The Stilo ST5.1 GT Composite is Stilo's Snell SA2020 version of their best-selling kevlar-carbon composite helmet. With an autoclave molded shell, the Stilo ST5.1 GT Composite auto racing helmet offers superior safety and protection compared to fiberglass and composites of competitors helmets. You get all this without sacrificing comfort or features, as Stilo continues to focus on minimizing weight and maximizing flexibility. With its large eye port, the Stilo ST5.1 GT Composite offers unsurpassed peripheral vision and all of the available tinted, mirrored, and iridium-colored visors (sold separately) have a center pinch-clip to make opening and closing easy, even while wearing nomex racing gloves. Additional visor shields for the Stilo ST5.1 GT. Although updated to meet the newest Snell SA2020 certification, the Stilo ST5.1 GT retains its FIA 8858-2015 homologation as well. This makes the helmet legal in nearly all road-racing competition (some sanctioning bodies do require FIA 8860 homologated helmets.) Stilo ST5.1 GT Gives You the Ultimate in Flexibility Built In The Stilo ST5.1 GT Composite is unsurpased in built-in flexibility. Its two side ports can be fitted with 3 different types of integrated communication electronics, forced air, helmet eject system, or a hydration system. Thanks to its innovative shell design, mounting and routing these options to the Stilo ST5.1 GT is sleek and seamless. When not in use, you don't even know the features are there. Whether you're using side-mounted communications, side air, or a built-in hydration kit for staying hydrated during long enduro stints, everything is neat, tidy and completely out of the way when not needed. Stilo offers simply the best modular racing helmet on the market. Industry-standard M6 threaded receivers are molded into the helmet shell to accommodate anchors for whichever head-and-neck restraint you use. Note: We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the large shell. Please order accordingly. Stilo ST5.1 GT Composite SA2020 Helmet Details: Manufacturer: Stilo Helmets Manufacturer part no.: AA0700AF2T Noise attenuating earmuffs are included to reduce exterior noise Seamlessly integrate communications, forced air, hydration and/or eject options into your Stilo ST 5.1 GT helmet Snell SA2020 certification Existing Stilo ST5 visor shields and accessories work on ST5.1 SA2020 helmets Exterior colors: Gloss Silver, Gloss White, Matte Black Interior color: Black, (Blue interior is available with Gloss White only, by special order) Stilo Offers Several Versions of the Venerable ST5.1 GT Carbon fiber: Stilo Helmets ST5.1 GT Carbon Helmet FIA 8860-2018: Stilo Helmets ST5 GT ZERO 8860-2018 Carbon Helmet FIA 8860-2018 ZERO: Stilo Helmets ST5 GT 8860-2018 Carbon Helmet A Note About Helmet Sizing and Head Measurement The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

Sparco Martini Racing Driver Suit In the golden years of rally racing, Sparco and Martini Racing contributed to the triumphs of the best drivers in the world. Now this partnership is renewed, and fans of the Martini Racing historical livery have access to beautiful re-creations of the original Sparco products. All reproductions have been updated with the newest Sparco technologies and carry current FIA homologations. The Sparco Martini Racing replica suit is made with all-new lightweight three-layer fabric. It offers superior fire protection, breathability and comfort when compared to the original. The suit features iconic Martini Racing embroideries and patches to faithfully recreate the original look. The Martini Racing replica suit is made from the latest generation fabrics which offer a soft lightweight outer fabric and breathable inserts at the sides and a large lower back stretch panel for maximum comfort. It also features a light-weight zipper and collar, pre-curved arms, pockets, classic tone-on-tone box quilt stitching and the Sparco signature epaulettes. Available in sizes 48-66. FIA approved. TECHNOLOGY AND FEATURES: Martini Racing embroideries Lightweight Three-layer Fabric Pre-curved arms Lightweight zipper and collar Breathable stretch panels FIA approved

Sparco Air Pro RF-5W: Retro Inspired From 1977 The Air Pro RF-5W 1977 is a painted version of the Sparco Air Pro RF-5W. This retro inspired helmet has a white base with blue or red stripes beneath a durable clear coat finish. The Sparco Air Pro RF-5W 1977 features a carbon-kevlar and fiberglass construction with a wider eye opening that can be used for open wheel or closed cockpit driving. Multiple exterior vents increase air circulation throughout a redesigned interior. This interior has channels that cool the driver, plus additional channels routing air towards the visor to reduce the chance of visor fogging. The Sparco Air Pro RF-5W 1977 has removable, washable padding that can be repositioned for a comfortably personalized fit. All interior seams have been removed from areas where greater pressure is exerted on the head. The Air Pro RF-5W 1977 has been designed to accommodate a drink tube and an intercom system (both sold separately). Available in white with blue or red stripes, the Sparco Air Pro RF-5W 1977 has HANS posts pre-installed. Snell SA2020 and FIA 8859-2015 approved. Sparco Racing Helmets History of Innovation and Excellence Today's Sparco auto racing helmet line is the result of over 40 years of research and development experience, including wind tunnel testing. The new range was designed to meet the requirements of both Snell SA2020 and FIA 8859-2015 ratings. To meet these requirements Sparco introduced new innovations for driver safety and comfort. All auto racing shells now have layers of Carbon-Kevlar for greater strength. Sparco helmets have been wind-tunnel tested to maximize exterior vent placement and air flow. The EPS interiors and padding have also been redesigned for increased air flow and driver comfort. Sparco also introduced a new size: Medium/Large. This M/L size takes advantage of using the smaller helmet shell which is lighter and more compact. Sparco Air Pro RF-5W 1977 Auto Racing Helmet Details: Manufacturer: Sparco Manufacturer part no.: 003375 Snell SA2020 and FIA 8859-2015 approved Painted retro design in either red or blue Lightweight carbon-kevlar/fiberglass construction Pre-molded interior to accommodate accessories like drink tubes and an intercom system (accessories sold separately) New Medium/Large size uses lighter, more compact shell Anodized aluminum chin strap hardware Removable, washable lining Wind tunnel optimized venting with anti-fog air channels Additional Sparco RF-5W Pro helmet shields available here. Sparco Air Pro RF-5W 1977 Auto Racing Helmet Sizes: 54cm (X-Small)) 55-56cm (Small) 57-58cm (Medium)) 59cm (Medium/Large)) 60cm (Large)) 61cm (X-Large)) 62cm (XX-Large)) Proper Helmet Fitment and Head Measurement The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

Sparco Eagle RS8.2 Driver Suit SAVE $$$ The Eagle RS-8.2 suit uses a combination of Hocotex and Eagle fabrics to produce an ultra lightweight and breathable race suit. With the aim of obtaining a closer and more modern fit, preformed armholes have been used, and, in line with the requirements linked to driver mobility during a race, the elasticized panels have been optimized (armholes, sides and elasticized back). The main structure of the suit, like in the previous version, is the tried and tested characteristic Hocotex, (single-layer multilayer weave 0.6 mm ultra-thin fabric), combined with other accessory fabrics, among which Eagle elasticized fabric (by now well-known and used in various Sparco models), and panels in contrast in flat ultralight cloth for anti-abrasion reinforcements on the legs and arms. Stitched quilting made with thin yarn, concealed pockets, preformed neck and belt with the characteristic Sparco logo. Extractor flap inserted in the armhole (characteristic and especially comfortable, especially not interfering with the positioning of the Hans). TECHNOLOGY: The suit weighs only 290/320 gr per square meter. Pre-curved Arms and Legs Strategic Stretch panels Available in sizes 48-66 FIA 8856-2000 Approved.

Sparco Competition Driver Suit 2022 The Sparco Competition Driver Suit is the perfect balance of value and high-end features such as weight and comfort. The Competition is made from the latest generation of synthetic fire-proof fabrics which offer a soft light-weight outer and breathable inserts. The Competition features a unique elastic arm cuff not featured on any race suit. This unique cuff system allows the cuff to easily tuck into the glove gauntlet. The Competition also features pre-curved arms and legs, large rear stretch panel and a breathable inner thigh stretch panel for ultimate comfort. Technological Features of the Sparco Competition Driver Suit FIA 8856-2018 and SFI 3.2A/5 Approved Unique Arm Cuff System Pre-curved Arms and Legs Inner Thigh Stretch Panels

Sparco Competition Lady Driver Suit Finally! A women's Driver Suit that isn't only available in pink or light blue! The Sparco Competition "Lady" suit is an all-new lightweight three-layer suit specifically tailored for women. It offers superior fire protection, breathability and comfort. The Competition Lady is made from the latest generation fabrics which offer a soft lightweight outer fabric and breathable inserts at the sides and underarms. Large stretch panels and full floating sleeves for maximum comfort. It also features a light-weight zipper and collar, pre-curved arms full floating arm sleeves, hidden pockets, tone on tone stitching and the Sparco signature epaulettes. TECHNOLOGY Tailored specifically for women Lightweight three-layer construction Full-floating sleeves Pre-Curved arms and legs Ultra-soft knit cuffs Light-weight zipper Multiple stretch panels for comfort SFI 3.2A/5 FIA 8856-2018

Alpinestars GP Race v2 Boot Cuff Driver Suit The GP Race v2 Suit is a multi-layer suit developed for all-round drivers racing in advanced competitions. Compliant with FIA Standard 8856-2018, the GP Race v2 Suit has an athletic regular fit and has a three-layer construction; one layer of aramidic twill and two layers of aramidic base knit. This assembly offers an increase of 5% in breathability performance, while still maintaining a light weight at 400g/m2. The suit also incorporates knitted stretch panels for maximum comfort on the armholes, lower back and crotch areas, with a larger and longer back panel to really aid driver flexibility and range of movement, while the internal flat seam, fully floating arm and extended shoulders provide even greater levels of driver comfort. Alpinestars GP Race v2 Boot Cuff Driver Suit Protection: Certified to the new FIA 8856-2018 homologation standard. Alpinestars fully floating arm construction with stretchable knit fabric ensures minimal material resistance while driving. Sold with laundry bag for convenience and effective material fiber protection. Alpinestars GP Race v2 Boot Cuff Driver Suit Construction: Multi-layer lightweight suit incorporating knitted stretchable panels for maximum comfort and excellent breathability. Aramidic knitted stretchable panels on back, waist and crotch for enhanced comfort and ease of movement. Ergonomic collar with soft knitted lining for extended coverage and maximum comfort. 100% Aramidic outer shell fabric for exceptional heat and flame-resistant proprieties. Adjustable collar and belted waist ensure a precise fit. Anatomical arm, leg and torso patterned paneling for an optimum fit in the driving position. Alpinestars exclusive shoulder epaulette construction provides an effective feature for the extraction of the driver in the event of a crash. Alpinestars GP Race v2 Boot Cuff Driver Suit Key Features: Ribbed, stretchable wrist and foot cuffs for optimum comfort. Premium YKK double slidered zipper personalized for a versatile and customizable fit. Thigh pockets for convenient, peace-of-mind storage. Regular fit design. Weighs 400 g/m2.