FluidLogic Coaxial System (Forced Air)
FluidLogic FluidLogic Coaxial System (Forced Air) $1,199.95
FluidLogic Coaxial System (Forced Air) Forced-Air applications use our Maglock® Coaxial connector to provide air and water quickly and easily. The Pod & Coaxial kit is designed for users that have a pre-existing forced air setup for their vehicle and helmet. The Pod is the heart and brain of the Fluidlogic™ system that also connects to your IOS device via Bluetooth to allow the user to fully customize their hydration profile. Included with the Pod is the Microbutton used to visually communicate with the user and command the Fluidlogic™ system with the press of a button. All the necessary mounting, wiring and plumbing hardware is included to turn the existing fluid source into a smart hydration system with no helmet drilling or modifications. The Fluidlogic™ Pod paired with the Coaxial system allows forced air users to connect both air and water within the same Maglock® magnetic connection. The Coaxial kit includes everything needed to completely set up one helmet and one seat in the vehicle.
FluidLogic Flush 360 System (Non Forced Air)
FluidLogic FluidLogic Flush 360 System (Non Forced Air) $1,099.95
FluidLogic Flush 360 System (Non Forced Air) The Pod & Flush 360 Kit is designed for users that do not use forced air or simply chose not to build onto their existing forced air system. The kit comes with the Pod as described above along with the Flush 360 assembly to allow the user to quickly connect/disconnect their hydration using the power of Maglock®. The Flush 360 quickly and easily installs onto the helmet in minutes with no drilling or modifications required. The Flush 360 Kit comes with everything needed to connect the existing fluid source to set up one complete helmet and seat in the vehicle.
Coolshirt FC-2 Dual Water-Air Temperature Controller
Coolshirt Coolshirt FC-2 Dual Water-Air Temperature Controller $352.00
Coolshirt FC-2 Dual Water/Air Controller The Coolshirt FC-2 dual water temperature/air flow control unit is specially designed to allow individual speed control of the internal cooling fluid pump in your Coolshirt Club System or Bag System as well as fan speed of the optional BF-135 or BF-235 blower (as in your Coolshirt Dry-Cool system).
Chillout Carbon Top Air for Stilo
Chillout Systems Chillout Carbon Top Air for Stilo $300.00
Chillout Carbon Top Air for Stilo Designed for performance, the Chillout Carbon Fiber Top Air Aplliqué for Stilo directs air via the rear intake barb and through small holes located on all ST5 helmets. Constructed from ultra light weight and incredibly resilient, pre-impregnated, dry carbon fiber, the front deflector improves vision by directing air towards the visor and away from the eyes. Old air flows out of the rear holes and from the bottom of the helmet, forcing out hot air and CO2 build-up. FEATURES Constructed from 1mm dry 3k 2x2 twill weave carbon fiber Connects directly to the Maglock or FluidLogic Helmet air system Compatible with most Stilo helmets Ultra lightweight and durable One piece carbon fiber construction, no glue or plastic used. **Maglock & helmet NOT included** **Shown on helmet for refence only**
Chillout Systems Pro and V3 Mountable Wired Remote Control
Chillout Systems Chillout Systems Pro and V3 Mountable Wired Remote Control $250.00
Chillout Systems Pro/V3 Mountable Wired Remote Control Featuring a 10 ft. cord and color digital display, the dash-mountable Wired Remote Control is designed to turn your Chillout Quantum Pro/V3 on and off as well as adjust the temperature from anywhere in your vehicle. The compact design is 1.5 x 2.5 x 0.5 inches and weighs under 5 oz. This is a great addition if you are mounting your system in an out-of-reach area in your vehicle like the trunk or rear seat area. * This remote works with the Quantum Pro (any mfg date) and Quantum V3 (mfg date 5/1/21 or later).
Stilo ST5 Short 90 Degree Top Air System For Maglock
Stilo Stilo ST5 Short 90 Degree Top Air System For Maglock $249.95
Keep Your Stilo ST5 Helmet Ventilated With The Stilo Top Air 90 Degree Maglock Kit The exclusive Stilo "Top Air System" for ST5 helmets takes fresh air to the driver's head and is fitted with an outlet designed to work with a Maglock system. With the innovative 90 degree system you can now make quick air connection with your Stilo ST5. Does not come with a flow adjuster. Air enters in through four small ventilation holes molded into the top of every ST5 helmet. Air fed into the Top Air is directed to the top of the head . Old air flows out of the side holes on the top of the helmet and from the bottom of the helmet, significantly reducing CO2 buildup in the helmet. Stilo's Top Air 90 Degree Maglock System can be fitted to all Stilo ST5 model helmets.
-11% sale
Stilo ST5 Short Top Air System For Maglock
Stilo Stilo ST5 Short Top Air System For Maglock $224.95 $250.00
Keep Your Stilo ST5 Helmet Ventilated With The Stilo Top Air Maglock Kit The exclusive Stilo "Top Air System" for ST5 helmets takes fresh air to the driver's head and is fitted with an outlet designed to work with a Maglock system. With the new innovative Top Air outlet you can now make quick air connection with your Stilo ST5. Does not come with a flow adjuster. Air enters in through four small ventilation holes molded into the top of every ST5 helmet. Air fed into the Top Air is directed to the top of the head . Old air flows out of the side holes on the top of the helmet and from the bottom of the helmet, significantly reducing CO2 buildup in the helmet. Stilo's Short Top Air Maglock System can be fitted to all Stilo ST5 model helmets.
Stilo ST5 Helmet Top Air Systems For Maglock
Stilo Stilo ST5 Helmet Top Air Systems For Maglock $224.95
Keep Your Stilo ST5 Helmet Ventilated With The Stilo Top Air Kit For Maglock Systems Fresh air keeps you cool and keeps sweat from getting in your eyes as you take the checkered flag. Endurance racers keep their focus high and lap times low by staying in the cool zone. This Top Air is designed to be used with a Maglock System. This unique cooling system feeds air from your car’s fresh air system to both the top of your head and to the front of your face, while at the same time helping keep the inside of your visor clear. This system integrates into the existing design of the ST5 helmet and does not require any drilling of the shell or modifications to the internal EPS foam. There are six small ventilation holes molded into the top of every ST5 helmet. Stilo's Top Air system fits over the center four holes and extends down the front of the helmet and just under the top of the visor. Air fed into the Top Air is directed both to the top of the head and down over the face. A small deflector just inside the visor area directs air towards the visor and away from the eyes. Old air flows out of the top side holes on the top of the helmet and from the bottom of the helmet, significantly reducing CO2 buildup in the helmet. Stilo's Top Air System can be fitted to all Stilo ST5 model helmets. It comes in two sizes to best fit your helmet: YA0893-S Non-Adjustable for helmets XS 54cm to L 59cm YA0894-S Non-Adjustable for helmets L+ 60cm to 4XL 64cm
Chillout Systems Carbon Fiber Air Duct Plenum
Chillout Systems Chillout Systems Carbon Fiber Air Duct Plenum from $195.00
Chillout Systems Carbon Fiber Air Duct Plenum Forcing fresh air to your cooler is the most efficient way to increase cooling performance and reduce amp draw from your electrical system. This plenum fits perfectly to the intake side of your Quantum Cooler, allowing much cooler air to be forced through the system via any four-inch duct (cooler, ducting, and intake scoop not included). A minimum 150 CFM blower (sold separately) should be used in conjunction with the plenum in order to cool properly. This carbon fiber plenum attaches via automotive-grade adhesive tape, creating a firm seal to keep the cooler pressurized with incoming cool air. This forces cool air all the way through the system and back out the exhaust side of the cooler, the most efficient way to reach maximum cooling capacity. Coupling the Chillout Systems Air Duct Plenum with your Quantum Cooler ensures no cool air is wasted, maximizing the effectiveness of the system.
Chillout Systems Insulated Coolant Y-Hose
Chillout Systems Chillout Systems Insulated Coolant Y-Hose $179.00
Chillout Systems Insulated Coolant Y-Hose The Chillout Systems Insulated Coolant Y-Hose is made of insulated liquid-transfer tubes encased in an ultra-durable, tear-resistant fabric shield. The primary end of the hose is 6 ft. long branching off into dual 4 ft. hose ends that enable multiple cooling garments to be connected to one driver cooling unit with ¼” fittings. Hose too long for your set-up? It's easy to cut the hose to desired length. Our hoses comes with extra supply of matching shrink wrap for a flawless, clean, durable finish. FEATURES: 10-foot overall length, includes additional heat shrink tubing for custom sizing while maintaining a finished look Male connectors, four pieces Female dual-prong connector to connect cooler, one piece Can be connected to other hoses to extend length including additional Y-connector Double-insulation: one layer to protect the hoses and insulation, the other to keep your coolant cool and efficient
FluidLogic Wave
FluidLogic FluidLogic Wave from $169.95
FluidLogic Wave The new WAVE of hydration is here! The Fluidlogic WAVE is a complete hydration system that keeps your drink of choice cold and secure for your entire ride. Magnetic nozzle dock ensures quick one handed hydration with the flick of the wrist. Features & Benefits Kitchen grade stainless steel is roost and rust resistant. Quick release bottle mount secures to any roll bar for convenient filling. Available in 32oz and 64oz capacity for short and long rides Keeps your drink cold for up to 8 hours Keep your eyes on the road ahead with quick one-handed megentic operation Stay hydrated outside your vehicle when parked at your favorite spot Dust resistant silicone bite valve prevents dust and sand from sticking to the bite-valve Insulated dairy-grade tubing keeps your drink cold in route to you Wide mouth bottle opening makes it easy to add ice to keep your drink cold all day Includes: 32oz or 64oz stainless steel bottle Roll bar quick release mount & hardware 7.5ft of Dairy grade insulated draw tube Magnetic draw hose dock Dust & drip resistant silicone bite valve Varying length straps for securing draw tube to roll bar
Chillout Systems Dual Voltage AC Power Supply
Chillout Systems Chillout Systems Dual Voltage AC Power Supply $160.00
Chillout Systems Dual Voltage AC Power Supply Shock-resistant external AC power supply enables cooling outside of your vehicle. This power adapter plugs into the wall and supports 110-220 volts.
FluidLogic 360 Helmet Side Kit
FluidLogic FluidLogic 360 Helmet Side Kit $149.95
FluidLogic 360 Helmet Side Kit Everything needed to completely set up any helmet to connect with the FluidLogic Flush 360 System Includes: Helmet Side Flush 360 Aquacom Pro (smaller mic size) Aquacom Baja (larger mic size) 4mm tubing
FluidLogic Coaxial Helmet Side Kit
FluidLogic FluidLogic Coaxial Helmet Side Kit $149.95
FluidLogic Coaxial Helmet Side Kit Everything needed to completely set up any forced air helmet to connect with the FluidLogic Coaxial System. Includes: Coaxial Helmet Side Maglock Aquacom Pro (smaller mic size) Aquacom Baja (larger mic size) 4mm tubing
Chillout Systems Insulated Coolant Hose
Chillout Systems Chillout Systems Insulated Coolant Hose from $140.00
Chillout Systems Insulated Coolant Hose The Chillout Hose is insulated liquid-transfer tubes encased in an ultra-durable, tear-resistant fabric shield. Six to ten feet of hose that connects your cooling garment to the driver cooling unit with ¼” fittings for a consistent flow cycle. Hose too long for your set-up? Solution: cut hose to desired length. Our hoses comes with an extra supply of matching shrink wrap for a flawless, durable, clean look. FEATURES: The 10-Foot hose includes additional heat shrink tubing for custom sizing while maintaining a finished look. Male connectors, two pieces. Female dual-prong connector to connect cooler, one piece Can be connected to other hoses to extend length (including Y connector). Double-Layer Insulation: one layer to protect the hose, a second to keep your coolant cool and efficient.
Chillout Systems 4
Chillout Systems Chillout Systems 4" Carbon Fiber NACA Duct $140.00
Chillout Systems 4" Carbon Fiber NACA Duct Ultralight weight and wind tunnel tested, the Chillout 4-inch NACA duct provides over 55% more airflow than a standard 3-inch NACA duct. Used in conjunction with 4-inch Neoprene Air Duct Hose and a 4-inch Chillout Carbon Fiber Plenum (both available in the drop downs above), the Chillout Carbon Fiber NACA Duct results in maximum cooling efficiency for your cooling system.NACA ducts bring air into a vehicle with a minimal increase in external drag. The purpose of a NACA duct is to increase the flow rate of air while not disturbing boundary layer airflow over your vehicle's exterior. When the cross-sectional flow area of the duct is increased, you decrease the static pressure and make the duct into a vacuum cleaner (without the drag effects of a standard scoop). The reason why the duct is narrow, then suddenly widens in a graceful arc is to increase the cross-sectional area slowly so that airflow doesn’t separate and cause turbulence and drag. FEATURES: Dry carbon fiber for light weight and durability. Wind tunnel tested. 55% more airflow than 3" NACA duct. Chillout Cooler sold separately.

Sign Up and Save

Subscribe to our eNewsletter to learn about events near you, great deals, new products and for tips to improve your creator skills.