Chillout Systems
Chillout Systems 3" Air Duct Plenum
$48.00
Chillout Motorsports 3" Air Duct Plenum connects to your Cooling System, efficiently increasing cooling performance whilst simultaneously reducing amp draw from your electrical system.
The plenum is designed to fit the intake side of your Quantum Cooler, allowing for much cooler air to be forced through the system via the 3" duct. A 200 CFM blower (Minimum) is required in conjunction with the plenum for the best performance.The 3" Air Duct Plenum attaches via the plenum holder found on the front of the Quantum Cooler systems (V2 and above), creating a seal to keep the cooler pressurized with the cool air. Forcing cool air through the system and out through the exhaust side of the cooler is the most efficient way to reach maximum cooling - no wasted cool air, and the cooling shirt system appreciates every bit of cool air it can get.INCLUDED:
3" Air Duct Plenum
Hans
HANS Sport 3 Tether Kits
$43.26
$48.07
HANS Sport 3 Tether Kits
Replace the tether kit on your HANS Sport 3 if you're involved in an incident, or swap out your existing tether for a longer or shorter one.
For use with Sliding tethers and post anchors only.
Sparco
Sparco X-Cool Recharge Kit
$40.00
Sparco X-Cool Recharge Kit
The easy-to-apply Sparco X-Cool Recharge Kit helps revive your Sparco Driver Suit or nomex underwear to it's original high-temperature performance. Simply add to your washing machine along with your performance apparel.Each kit can treat one Sparco Driver Suit or one complete set of Sparco nomex underwear (balaclava, shirt, pants and socks).
Alpinestars
Alpinestars Engine Pit Gloves
$39.95
Alpinestars Engine Pit Gloves
The Engine Glove is a hybrid multi-material glove which offer high levels of comfort and protection. Soft, lightweight and flexible, the glove has mesh panels for optimum levels of breathability, while the tough synthetic suede leather palm means it is highly durable. It’s also reassuringly protective thanks to the strategically positioned TPR on the knuckles. Another neat feature is the conductive print on the palm and fingers which allows mechanics to operate a tablet while wearing the gloves.
KEY FEATURES
Advanced TPR knuckle insert offers impact protection without compromising dexterity.
Ergonomic stretch insert between thumb and palm and on backhand offers flexibility to vastly improve hand movement.
Sublimated, fade-resistant color on back of the hand for a distinctive look.
Synthetic suede thumb reinforcement for durability and seam reinforcement.
Touchscreen compatible fingertip for use with handheld devices.
Short cuff styling.
CONSTRUCTION
Lightweight, multi-material glove incorporating a stretch mesh and stretch fabric on the top of the hand.
Stretch mesh and stretch fabric offer comfort and cooling performance.
Synthetic suede palm with padding provides grip, durability and tactility.
Hook and loop grip cuff closure on the back of the hand for a precise fit.
Strategic 2mm foam padding on fingers for fit and comfort.
Racing Optics
Stilo Tearoff ST5 Thick 4mil
$39.95
Stilo ST5 Thick 4mil Tearoff Pack qty 12(4 Sleeves of 3)
Protect Your Stilo ST5 Helmet Shield from rocks, dirt, and debris with these 4 mil thick tearoffs. Measuring 4 mil thickness (the most popular thickness for open cockpit and harsh environment racers), it is intended for road racing and/or dirt track use. This package of 4 mil tear-offs are in 4 stacks of 3 per package (12 tear-offs in all). Now you can greatly extend the life of your Stilo ST5 shield by drastically reducing pitting and scratches.
Stilo 4 mil Tearoff Pack Quantity 10 (4 Sleeves of 3) Details:
Manufacturer: Stilo
Manufacturer part numbers: 3459C
Thickness each: 4 mil
Gradient: Clear
Fits All Stilo ST5 Helmets: Yes
Fits All Stilo ST4F and Stilo ST4W Helmets: No
4 Stacks of 3 each
Note: This is the thicker of tearoffs (4 mil) for your Stilo ST5 series helmets. It is used primarily in Road Racing Open Cockpit or other harsh environment race tracks
Sparco
Sparco Meca 3 Pit Gloves
$39.00
Sparco Meca 3 Pit Gloves
The back of the Sparco Meca 3 pit mechanic's glove is made from elasticized, printed, scuff resistant fabric. The palms are synthetic scuff resistant hide, giving you excellent dexterity and feel with reinforcements positioned between the thumb and index finger. Pads between the fingers provide excellent breathability and comfort. The Meca 3 has a velcro wrist strap for a secure, comfortable fit.
Stilo
Stilo ST5 Hydration Kit
$38.11
$42.34
Stilo ST5 Helmet Hydration Kit
Hydration bite-valve kit designed specifically for the Stilo ST4 and ST5 helmet.
KIT INCLUDES:
(1) Male hydration connector
(1) Female hydration connector
(1) Hydration tube
(1) Bite valve
Stilo
Stilo ST5 Side Air Adapter Hose
$37.08
$41.20
Stilo ST5 Side Air Adapter Hose
Fresh air keeps you cool and keeps sweat from going into your eyes as you take the checkered flag. Endurance racers keep their focus high and lap times low by staying in the cool zone.
This adapter hose allows you to connect a standard forced-air hose, typically used for top-air connections, to the side air connector on your Stilo helmet.
MUST BE USED IN CONJUCTION WITH SIDE AIR KIT YA0653.
Stilo
Stilo ST5 Earcup Set
$31.93
$34.95
Stilo ST5 Earcup Set
Stilo passive noise attenuating removable earcups. Not for use with helmets equipped with built-in earcup communications. Can be used in conjunction with 3.5mm jack and in-ear buds, or without any communications installed.
FluidLogic
Maglock Air Hose
from $31.80
Maglock Air Hose
**Maglock Air hose side NOT included**
Maglock Air Hose is built to our exact specifications to ensure that you get the lightest, most flexible hose on the market today. The feedback from our test pilots ensures you that neck fatigue during use is greatly reduced, furthermore, this hose does not leverage or disconnect the Maglock Air in high G or high impact environments. Used by top motorsports athletes including all Andretti Indy cars, Ricky Stenhouse Jr. (NASCAR), Ricky Johnson (TT), and Guy Cosmo (IMSA). We highly recommend our hose to be paired with Maglock Air.
Chillout Systems
Chillout Systems 1.5 Liter Coolant Formula
$30.00
Chillout Systems 1.5 Liter Coolant Formula
This 1.5 liters of coolant will last a single racer an entire season!
Non-toxic and biodegradable coolant that circulates through your Chillout Systems cooler and cooling garments, keeping you cool and your cooler running in prime condition. Does not evaporate, greatly extending the amount of time between refilling your system.
Chillout cooling garments encase tubular veins within the material, covering a large surface area of the body to keep you cool, dry, and focused.
We suggest you replace the Chillout Coolant in your system at least once per race season. It takes less than two minutes and keeps your cooling system running in peak condition.
Molecule
Molecule Helmet Care Kit
$29.95
Molecule Helmet Care Kit
This specially-bundled kit from Thunderhill makes it easy and safe to keep your racing helmet in top condition, clean and fresh. The light-duty Cleaner & Polish spray is designed to keep your helmet exterior shell clean, shiny and protected. Safe to use on all finishes, including flat and matte. Refresher spray keeps the inside of your helmet clean, while Anti-Fog helps to keep the inside of your visor clear. Rain Repel is excellent at keeping the outside of your visor clear and making it easy to clean off debris, bugs, etc.
KIT INCLUDES:
(1) Helmet CLEANER & POLISH 4 oz.
(1) Helmet REFRESHER 4 oz.
(1) Helmet RAIN REPEL 4 oz.
(1) Helmet ANTI-FOG 4 oz.
Molecule
Molecule Race Fabric Protector 16 oz.
$29.95
Specially engineered formula bonds technical fabrics, like Nomex®, to help repel oils, grease and other liquid stains. Maintains breathability while keeping colors vibrant by shielding UV rays.
Alpinestars
Alpinestars KX v2 Karting Balaclava
$29.95
Alpinestars KX v2 Karting Balaclava
Alpinestars KX v2 Balaclava Summer is extremely lightweight and thin, while being incredibly soft to the touch for greatly enhanced comfort when wearing a full face helmet, and has extensive mesh panels on the rear for optimum levels of breathability.
Molecule
Molecule Matte Helmet Care Kit
$29.95
Molecule Matte Helmet Care Kit
This specially-bundled kit from Thunderhill makes it easy and safe to keep your racing helmet in top condition, clean and fresh. The light-duty Matte Detailer spray is designed to keep your Matte helmet exterior shell clean. Safe to use on all finishes, including flat and matte. Refresher spray keeps the inside of your helmet clean, while Anti-Fog helps to keep the inside of your visor clear. Rain Repel is excellent at keeping the outside of your visor clear and making it easy to clean off debris, bugs, etc.
KIT INCLUDES:
(1) Helmet MATTE DETAILER 4 oz.
(1) Helmet REFRESHER 4 oz.
(1) Helmet RAIN REPEL 4 oz.
(1) Helmet ANTI-FOG 4 oz.
Bell
BELL Cover plate & FORCED AIR low profile nozzle for HP6/GT6 helmet, clear
$29.95
BELL Cover plate & FORCED AIR low profile nozzle for HP6/GT6 helmet, clear
Kit consist of:1 Pcs FORCED LOW PROFILE NOZZLE1 Pcs COVER PLATE2 Sets* SEAL KIT
*Each SEAL KIT set contains 2 pieces of 20 x 80mm and 2 pieces of 20 x 120mm.
Sign Up and Save
Subscribe to our eNewsletter to learn about events near you, great deals, new products and for tips to improve your creator skills.
