All

For drivers who demand the utmost from their car Designed and tested specifically for track day enthusiasts and for drivers who demand the utmost performance from their cars, these kits offer superlative performance for both normal driving and demanding track day sessions. Brembo kits consist of cross-drilled or slotted ventilated, one-piece or composite discs and aluminium calipers with 4, 6 or 8 pistons; a complete set of high performance pads; metal-braided hoses and high quality hardware. ​Solutions and technologies born on the race trackBraking systems consisting of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology.The kit consists of aluminium calipers with opposed pistons which, depending on the car model and in increasing order of performance, may be composite, monoblock or even billet monoblock components, combined with cross-drilled or slotted one-piece or composite oversized discs.Brembo kits combine the best solutions available to offer the perfect solution for the individual characteristics of each model.The heart of the kit consists of aluminium calipers. These are also available as monoblock parts machined from a single billet of cast aluminium, which ensure outstanding rigidity and minimised deformation. The discs supplied in the kit, which may either be floating or one-piece, depending on the specific car model, feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%.Cross-drilled and slotted finishes are designed and executed with meticulous precision. These holes or slots in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for each application, TÜV/DOT homologated metal-braided hoses, an adapter and high-quality fastener hardware complete the kit. More braking torque and thermal capacity on the trackUsing radial-mounted fixed calipers together with oversized discs gives the system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use. Fixed calipers improve the durability and efficiency of the system: the opposed multiple pistons act on the pads with more precision, due to the smaller piston diameter and the reduced pressure exerted on each individual piston, while the greater overall surface area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses reduce brake fluid absorption. The result is improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel. Featuring a hat in aluminium alloy, the oversized floating disc system reduces unsprung mass (for improved handling) and thermal stress. The mounting system is engineered to permit a greater degree of both radial and axial float. This characteristic, together with the greater dimensions of the braking rotor surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track. Eye-catching, unique looksWith a combination of painted calipers (available in red, black or silver) flaunting the Brembo logo, and slotted or cross-drilled discs, the Gran Turismo kit gives an unmistakably sporty, eye-catching look to the car, offering that extra special touch for drivers who want their vehicle to stand out from the crowd.Catering for the more discerning driver is the GT-R line of kits. These offer even more performance and consist of billet-monoblock calipers, slotted discs in diameters up to 405 mm and special high performance pads.

For drivers who demand the utmost from their car Designed and tested specifically for track day enthusiasts and for drivers who demand the utmost performance from their cars, these kits offer superlative performance for both normal driving and demanding track day sessions. Brembo kits consist of cross-drilled or slotted ventilated, one-piece or composite discs and aluminium calipers with 4, 6 or 8 pistons; a complete set of high performance pads; metal-braided hoses and high quality hardware. ​Solutions and technologies born on the race trackBraking systems consisting of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology.The kit consists of aluminium calipers with opposed pistons which, depending on the car model and in increasing order of performance, may be composite, monoblock or even billet monoblock components, combined with cross-drilled or slotted one-piece or composite oversized discs.Brembo kits combine the best solutions available to offer the perfect solution for the individual characteristics of each model.The heart of the kit consists of aluminium calipers. These are also available as monoblock parts machined from a single billet of cast aluminium, which ensure outstanding rigidity and minimised deformation. The discs supplied in the kit, which may either be floating or one-piece, depending on the specific car model, feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%.Cross-drilled and slotted finishes are designed and executed with meticulous precision. These holes or slots in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for each application, TÜV/DOT homologated metal-braided hoses, an adapter and high-quality fastener hardware complete the kit. More braking torque and thermal capacity on the trackUsing radial-mounted fixed calipers together with oversized discs gives the system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use. Fixed calipers improve the durability and efficiency of the system: the opposed multiple pistons act on the pads with more precision, due to the smaller piston diameter and the reduced pressure exerted on each individual piston, while the greater overall surface area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses reduce brake fluid absorption. The result is improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel. Featuring a hat in aluminium alloy, the oversized floating disc system reduces unsprung mass (for improved handling) and thermal stress. The mounting system is engineered to permit a greater degree of both radial and axial float. This characteristic, together with the greater dimensions of the braking rotor surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track. Eye-catching, unique looksWith a combination of painted calipers (available in red, black or silver) flaunting the Brembo logo, and slotted or cross-drilled discs, the Gran Turismo kit gives an unmistakably sporty, eye-catching look to the car, offering that extra special touch for drivers who want their vehicle to stand out from the crowd.Catering for the more discerning driver is the GT-R line of kits. These offer even more performance and consist of billet-monoblock calipers, slotted discs in diameters up to 405 mm and special high performance pads.

For drivers who demand the utmost from their car Designed and tested specifically for track day enthusiasts and for drivers who demand the utmost performance from their cars, these kits offer superlative performance for both normal driving and demanding track day sessions. Brembo kits consist of cross-drilled or slotted ventilated, one-piece or composite discs and aluminium calipers with 4, 6 or 8 pistons; a complete set of high performance pads; metal-braided hoses and high quality hardware. ​Solutions and technologies born on the race trackBraking systems consisting of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology.The kit consists of aluminium calipers with opposed pistons which, depending on the car model and in increasing order of performance, may be composite, monoblock or even billet monoblock components, combined with cross-drilled or slotted one-piece or composite oversized discs.Brembo kits combine the best solutions available to offer the perfect solution for the individual characteristics of each model.The heart of the kit consists of aluminium calipers. These are also available as monoblock parts machined from a single billet of cast aluminium, which ensure outstanding rigidity and minimised deformation. The discs supplied in the kit, which may either be floating or one-piece, depending on the specific car model, feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%.Cross-drilled and slotted finishes are designed and executed with meticulous precision. These holes or slots in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for each application, TÜV/DOT homologated metal-braided hoses, an adapter and high-quality fastener hardware complete the kit. More braking torque and thermal capacity on the trackUsing radial-mounted fixed calipers together with oversized discs gives the system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use. Fixed calipers improve the durability and efficiency of the system: the opposed multiple pistons act on the pads with more precision, due to the smaller piston diameter and the reduced pressure exerted on each individual piston, while the greater overall surface area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses reduce brake fluid absorption. The result is improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel. Featuring a hat in aluminium alloy, the oversized floating disc system reduces unsprung mass (for improved handling) and thermal stress. The mounting system is engineered to permit a greater degree of both radial and axial float. This characteristic, together with the greater dimensions of the braking rotor surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track. Eye-catching, unique looksWith a combination of painted calipers (available in red, black or silver) flaunting the Brembo logo, and slotted or cross-drilled discs, the Gran Turismo kit gives an unmistakably sporty, eye-catching look to the car, offering that extra special touch for drivers who want their vehicle to stand out from the crowd.Catering for the more discerning driver is the GT-R line of kits. These offer even more performance and consist of billet-monoblock calipers, slotted discs in diameters up to 405 mm and special high performance pads.

Forgeline CF201 (Five-Lug) Priced per wheel (ask about our special wheel and tire package pricing). CONTACT ONE OF OUR SPECIALISTS TODAY TO CREATE YOUR CUSTOM FORGED WHEEL SET. BECAUSE WE USE FORGELINES ON OUR OWN CARS, WE KNOW WHAT WORKS FOR YOURS! The lightweight Carbon+Forged CF201 wheel combines a weight-optimized, CNC-machined forged aluminum center with Forgeline's revolutionary proprietary carbon fiber barrel, delivering the ultimate in technological advancement, exclusive styling, and unparalleled performance. The CF201 takes advantage of its carbon fiber barrel with a lightweight racing-inspired five V-spoke center design and aggressive I-beam machining. The result is a wheel with extremely impressive performance metrics: very low static mass, very low rotational inertia, minimal deflection, and excellent fatigue strength.The CF201’s super-lightweight carbon fiber barrel utilizes a high-density carbon fiber bundle, a high-clarity resin system, and a large carbon weave to create an attractive, visually distinctive rim that's 42% lighter than its aluminum equivalent. This significant weight reduction at the wheel's outer perimeter has the great effect on unwanted inertia and yields real-world improvements in acceleration, braking, ride quality, NVH, driver/passenger comfort, and even fuel economy. Forgeline Carbon+Forged carbon fiber barrels are also engineered and tested to deliver industry-leading fatigue strength, impact/damage resistance, and deflection stiffness. Tested by an independent automotive laboratory, they have proven to be incredibly strong and robust, exceeding all existing SAE and TUV test specifications and surpassing the AK-LH 08 Radial Impact Test standard.The CF201 is available in 20 and 21-inch fitments, each uniquely engineered for modern exotic sport and luxury vehicle applications. And like any Forgeline wheel, the CF201’s forged aluminum center is available in a full array of customizable finish options. (The Carbon+Forged carbon fiber barrel preserves the standard high-gloss natural carbon weave finish.)If you appreciate the world's most advanced wheel technology, want to stand apart from the crowd with unique styling & finish options, and have the means to afford the very finest, then the made-to-order Carbon+Forged CF201 wheel is quite literally created just for you. TECHNICAL FEATURES: Lightweight Racing-Inspired 6061-T6 Forged Aluminum Center Aggressive I-Beam Machining Details Revolutionary Proprietary Carbon Fiber Barrel Very Low Static Mass Very Low Rotational Inertia Minimal Deflection Excellent Fatigue Strength Carbon+Forged Carbon Fiber Barrel Exceeds All Existing SAE and TUV Test Specifications Carbon+Forged Carbon Fiber Barrel Surpasses the AK-LH 08 Radial Impact Test Standard Intended for Street Use, Not Recommended for Track Applications. Available in 20 and 21-inch Fitments Customizable Finish Options (Aluminum Center Only) Carbon+Forged Carbon Fiber Barrel Finished in High-Gloss Natural Carbon Weave

Call us any time at 844-438-7244 for Thunderhill-Exclusive Forgeline pricing you won't find anywhere else! Thunderhill offers FREE SHIPPING on all Forgeline Wheel Orders! FORGELINE CF202 (5 LUG) Priced per Wheel (ask about our special wheel and tire package pricing) CONTACT ONE OF OUR SPECIALISTS TODAY TO CREATE YOUR CUSTOM FORGED WHEEL SET. BECAUSE WE USE FORGELINES ON OUR OWN CARS, WE KNOW WHAT WORKS FOR YOURS! The uniquely-styled Carbon+Forged CF202 wheel combines a weight-optimized CNC-machined forged aluminum center with our revolutionary proprietary carbon fiber barrel to deliver the ultimate in technological advancement, exclusive styling, and industry-leading lightweight performance. The CF202 offers cutting-edge styling with a unique forged 6061-T6 aluminum center featuring sculpted directional spokes that connect at the top of the center to form a distinctive head-turning design! The CF202’s super-lightweight carbon fiber barrel utilizes a high-density carbon fiber bundle, high-clarity resin system, and large carbon weave to create an attractive and visually distinctive rim that is 42% lighter than its aluminum equivalent, delivering a significant weight reduction to the wheel's outer perimeter, where it has the greatest reduction in unwanted inertia and yields real-world improvements to acceleration, braking, cornering traction, ride quality, NVH (noise, vibration, & harshness), driver/passenger comfort, and fuel economy. Forgeline Carbon+Forged carbon fiber barrels are also engineered and tested to deliver industry-leading levels of fatigue strength, impact/damage resistance, and deflection stiffness. Tested by an independent automotive industry laboratory, they have proven to be incredibly strong and robust, exceeding all existing SAE and TUV test specifications and surpassing the AK-LH 08 Radial Impact Test standard.The CF202 is available in 20 and 21-inch fitments, each uniquely engineered for modern exotic sport and luxury vehicle applications. And like any Forgeline wheel, the CF201’s forged aluminum center is available in the full array of customizable finish options. (Note: The Carbon+Forged carbon fiber barrel preserves the standard high-gloss natural carbon weave finish.)If you appreciate the world's most advanced wheel technology, want to stand apart from the crowd with unique styling & finish options, and have the means to afford the very best, then our made-to-order Carbon+Forged CF202 wheel is quite literally created just for you. Cutting-Edge Directional Split-Five Spoke Center Machined From 6061-T6 Forged Aluminum Thickly-Scuplted Angular Spokes "Wrapped" Lug Holes Thick Chamfered Spoke Bases That Alternate Along the Rim Register Revolutionary Proprietary Carbon Fiber Barrel Lightweight Low Rotational Inertia Minimal Deflection Excellent Fatigue Strength Carbon+Forged Carbon Fiber Barrel Exceeds All Existing SAE and TUV Test Specifications Carbon+Forged Carbon Fiber Barrel Surpasses the AK-LH 08 Radial Impact Test Standard Intended for Street Use. Not Recommended for Track Applications. Available in 20 and 21-inch Fitments Customizable Finish Options (Aluminum Center Only) Carbon+Forged Carbon Fiber Barrel Finished in High-Gloss Natural Carbon Weave

Brembo 345x28 Two-Piece Iron Rotors and Four-Piston Monobloc Calipers For Drivers Who Demand the Utmost From Their Car Designed and tested specifically for track-day enthusiasts and drivers who demand the utmost performance from their cars, these kits offer superlative performance for both everyday driving and demanding track-day sessions. Brembo kits consist of cross-drilled or slotted, ventilated two-piece discs and aluminium calipers with four pistons; a complete set of high performance pads; metal-braided hoses; and high quality hardware. Solutions and Technologies Born on the Race Track Braking systems consisting of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology. The kit consists of aluminium monobloc (one-piece) calipers with opposed pistons combined with cross-drilled or slotted two-piece floating oversized discs. Brembo kits combine the best solutions available to offer the perfect solution for the individual characteristics of each model. The heart of the kit consists of aluminium calipers. These are monobloc parts machined from a single billet of cast aluminium, ensuring outstanding rigidity and minimised deformation. The two-piece floating discs supplied in the kit feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%. Cross-drilled and slotted finishes are designed and executed with meticulous precision. These holes or slots in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for each application, TÜV/DOT homologated metal-braided hoses, an adapter and high-quality fastener hardware complete the kit. More Braking Torque and Thermal Capacity on Track Using radial-mounted fixed monobloc calipers together with oversized discs gives the system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use. Fixed calipers improve the durability and efficiency of the system: the opposed multiple pistons act on the pads with more precision, due to the smaller piston diameter and the reduced pressure exerted on each individual piston, while the greater overall surface area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses reduce brake fluid absorption. The result is improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel. Featuring a hat in aluminium alloy, the oversized floating disc system reduces unsprung mass (for improved handling) and thermal stress. The mounting system is engineered to permit a greater degree of both radial and axial float. This characteristic, together with the greater dimensions of the braking rotor surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track. Eye-Catching and Unique Looks With a combination of painted calipers (available in red, yellow, black or silver) flaunting the Brembo logo, and slotted or cross-drilled discs, this Brembo big brake system gives an unmistakably sporty, eye-catching look to the car, offering that extra special touch for drivers who want their vehicle to stand out from the crowd. KIT DETAILS: Brembo GT-M Systems Caliper Body: Monobloc Radial Mount Caliper Colors: Black, Red, Yellow or Silver Number of Pistons: 4 Disc Size and Construction: 345mm x 28mm Cast Iron Disc Type: Drilled or Slotted Disc Vane Design: Vented Straight Vane Disc Material: Cast Iron Disc to Hat Mounting: Floating H-Bobbin with Anti Rattle Spring Front or Rear System: REAR Goodridge Stainless Steel brake lines Brembo High-Performance Brake Pads

Brembo 345x28 Two-Piece Iron Rotors and Four-Piston Calipers FITS (REAR): BMW M3 Coupe (E92) 2007-2013 BMW M3 Convertible (E93) 2007-2013 BMW M3 Sedan (E90) 2008-2013 For Drivers Who Demand the Utmost From Their Car Designed and tested specifically for track-day enthusiasts and drivers who demand the utmost performance from their cars, these kits offer superlative performance for both everyday driving and demanding track-day sessions. Brembo kits consist of cross-drilled or slotted, ventilated two-piece discs and aluminium monobloc calipers with four pistons; a complete set of high performance pads; metal-braided hoses; and high quality hardware. Solutions and Technologies Born on the Race Track Braking systems consisting of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology. The kit consists of aluminium monobloc (one-piece) calipers with opposed pistons combined with cross-drilled or slotted two-piece floating oversized discs. Brembo kits combine the best solutions available to offer the perfect solution for the individual characteristics of each model. The heart of the kit consists of aluminium calipers. These are monobloc parts machined from a single billet of cast aluminium, ensuring outstanding rigidity and minimized deformation. The discs supplied in the kit, which are floating two-piece design, feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%. Cross-drilled and slotted finishes are designed and executed with meticulous precision. These holes or slots in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for each application, TÜV/DOT homologated metal-braided hoses, an adapter and high-quality fastener hardware complete the kit. More Braking Torque and Thermal Capacity on Track Using radial-mounted fixed calipers together with oversized discs gives the system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use. Fixed calipers improve the durability and efficiency of the system: the opposed multiple pistons act on the pads with more precision, due to the smaller piston diameter and the reduced pressure exerted on each individual piston, while the greater overall surface area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses reduce brake fluid absorption. The result is improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel. Featuring a hat in aluminium alloy, the oversized floating disc system reduces unsprung mass (for improved handling) and thermal stress. The mounting system is engineered to permit a greater degree of both radial and axial float. This characteristic, together with the greater dimensions of the braking rotor surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track. Eye-Catching and Unique Looks With a combination of painted calipers (available in red, yellow, black or silver) flaunting the Brembo logo, and slotted or cross-drilled discs, the Gran Turismo kit gives an unmistakably sporty, eye-catching look to the car, offering that extra special touch for drivers who want their vehicle to stand out from the crowd. Catering to the more discerning driver is the GT-R line of kits. These offer even more performance and consist of billet-monoblock calipers, slotted discs in diameters up to 405 mm and special high performance pads. KIT DETAILS: Brembo GT-M Systems Caliper Body: Monobloc Radial Mount Caliper Colors: Black, Red, Yellow or Silver Number of Pistons: 4 Disc Size and Construction: 345mm x 28mm Cast Iron Disc Type: Drilled or Slotted Disc Vane Design: Vented Straight Vane Disc Material: Cast Iron Disc to Hat Mounting: Floating H-Bobbin with Anti Rattle Spring Front or Rear System: REAR Goodridge Stainless Steel brake lines Brembo High-Performance Brake Pads

For drivers who demand the utmost from their car Designed and tested specifically for track day enthusiasts and for drivers who demand the utmost performance from their cars, these kits offer superlative performance for both normal driving and demanding track day sessions. Brembo kits consist of cross-drilled or slotted ventilated, one-piece or composite discs and aluminium calipers with 4, 6 or 8 pistons; a complete set of high performance pads; metal-braided hoses and high quality hardware. ​Solutions and technologies born on the race trackBraking systems consisting of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology.The kit consists of aluminium calipers with opposed pistons which, depending on the car model and in increasing order of performance, may be composite, monoblock or even billet monoblock components, combined with cross-drilled or slotted one-piece or composite oversized discs.Brembo kits combine the best solutions available to offer the perfect solution for the individual characteristics of each model.The heart of the kit consists of aluminium calipers. These are also available as monoblock parts machined from a single billet of cast aluminium, which ensure outstanding rigidity and minimised deformation. The discs supplied in the kit, which may either be floating or one-piece, depending on the specific car model, feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%.Cross-drilled and slotted finishes are designed and executed with meticulous precision. These holes or slots in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for each application, TÜV/DOT homologated metal-braided hoses, an adapter and high-quality fastener hardware complete the kit. More braking torque and thermal capacity on the trackUsing radial-mounted fixed calipers together with oversized discs gives the system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use. Fixed calipers improve the durability and efficiency of the system: the opposed multiple pistons act on the pads with more precision, due to the smaller piston diameter and the reduced pressure exerted on each individual piston, while the greater overall surface area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses reduce brake fluid absorption. The result is improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel. Featuring a hat in aluminium alloy, the oversized floating disc system reduces unsprung mass (for improved handling) and thermal stress. The mounting system is engineered to permit a greater degree of both radial and axial float. This characteristic, together with the greater dimensions of the braking rotor surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track. Eye-catching, unique looksWith a combination of painted calipers (available in red, black or silver) flaunting the Brembo logo, and slotted or cross-drilled discs, the Gran Turismo kit gives an unmistakably sporty, eye-catching look to the car, offering that extra special touch for drivers who want their vehicle to stand out from the crowd.Catering for the more discerning driver is the GT-R line of kits. These offer even more performance and consist of billet-monoblock calipers, slotted discs in diameters up to 405 mm and special high performance pads.

AiM MXT 1.3 Logger with GPS Ready to elevate your racing game? Meet the AiM MXT 1.3 Logger with GPS – the ultimate data logging dash that transforms your track day into a high-tech mission. This bad boy isn't just a dashboard; it's your new best friend on the circuit. Features And Benefits Flexibility and Customization Galore: The AiM MXT 1.3 boasts an extra-large 1280x480 pixel (10" diagonal) TFT display, breaking free from the boring, factory-designed LCDs. Want your data your way? You got it! The customizable screen lets you set up eight different pages with unique designs. Data Overload (In the Best Way): With eight analog input channels, you can sample, log, and display a wide array of temperatures, pressures, and potentiometers (think throttle and steering positions). And that's just the start. A CAN input allows endless expansion with AiM CAN Data Hubs (sold separately). Connect Lambda (O2) sensors, SmartyCam, or even more channels without using analog inputs! Ultimate Compatibility: Hook up to multiple ECUs to log any data your engine management system gathers. The MXT 1.3 also includes an internal gyroscope, 3-axis g-sensor, GPS module, four-wheel speed channels, a lap time receiver input, and two digital outputs. It's a data-logging beast that grows with you. Visual Delight: Housed in a sleek, anodized aluminum frame (10.94" x 5.3"), the 9.6" x 3.6" screen auto-dims to match your environment. Configure ten shift light LEDs and six alarm LEDs to flash in any of seven colors, triggered by your custom conditions. Set shift lights for each gear, choose colors, and more! Rear-View Magic: An extra port lets you connect analog cameras to use the dash as a backup or rear-view mirror display. Note: this doesn't work with the SmartyCam, but it's perfect for other cameras. Massive Storage and Easy Downloads: With 4GB of non-volatile memory, store hours of race data for deep dives later. Download everything to your computer using the built-in secure Wi-Fi – no cables needed. What’s in the Box? The MXT 1.3 data logging display, wiring harness with a 37-pin Deutsch connector, and the GPS09 module. Note: All sensors are sold separately, and for additional connections, you’ll need the AiM MX-Series Auxiliary Wiring Harness with 22-Pin Deutsch Connector (also sold separately). Product Specifications: Display: 1280x480 pixel (10" diagonal) TFT Housing: 10.94" x 5.3" anodized aluminum Channels: 8 analog inputs, 1 CAN input Sensors: Internal gyroscope, 3-axis g-sensor, GPS module, 4 wheel speed channels Memory: 4GB non-volatile Connectivity: Secure Wi-Fi, 2 digital outputs Power Supply: 9 - 15V external FAQs Q: Can the MXT 1.3 connect to my car's ECU? A: Absolutely! The MXT 1.3 can connect to a wide range of ECUs to log any data collected by the engine control unit. Q: How many pages can I customize on the display? A: You can create up to eight different pages, each with its unique screen design. Q: Do I need a separate power supply? A: Yes, the MXT 1.3 requires a 9 - 15V external power supply. Q: Is the SmartyCam compatible with the camera input port? A: No, the extra port on the MXT 1.3 is not compatible with the SmartyCam. It’s designed for other analog cameras. Q: What do I need for additional connections? A: For analog channels 5-8, speed inputs 2-4, digital outputs, and RS232 ECU connection, you’ll need the AiM MX-Series Auxiliary Wiring Harness with 22-Pin Deutsch Connector (sold separately). Ready to dominate the track? The AiM MXT 1.3 Logger with GPS is your ticket to precision, performance, and endless customization. Don’t just drive – thrive. Grab yours today and leave your competition in the dust! Call To Action: Don’t wait – gear up for your next race with the AiM MXT 1.3 Logger with GPS. Click "Add to Cart" now and transform your driving experience! All other sensors and modules sold separately.

Brembo 332x32 Two-Piece Iron Rotors and Four-Piston Calipers For Drivers Who Demand the Utmost From Their Car Designed and tested specifically for track-day enthusiasts and drivers who demand the utmost performance from their cars, these kits offer superlative performance for both everyday driving and demanding track-day sessions. Brembo kits consist of cross-drilled or slotted, ventilated two-piece discs and aluminium calipers with four pistons; a complete set of high performance pads; metal-braided hoses; and high quality hardware. Solutions and Technologies Born on the Race Track Braking systems consisting of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology. The kit consists of aluminium calipers with opposed pistons which, depending on the car model and in increasing order of performance, may be composite, monoblock or even billet monoblock components, combined with cross-drilled or slotted one-piece or composite oversized discs. Brembo kits combine the best solutions available to offer the perfect solution for the individual characteristics of each model. The heart of the kit consists of aluminium calipers. These are also available as monoblock parts machined from a single billet of cast aluminium, which ensure outstanding rigidity and minimised deformation. The discs supplied in the kit, which may either be floating or one-piece, depending on the specific car model, feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%. Cross-drilled and slotted finishes are designed and executed with meticulous precision. These holes or slots in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for each application, TÜV/DOT homologated metal-braided hoses, an adapter and high-quality fastener hardware complete the kit. More Braking Torque and Thermal Capacity on Track Using radial-mounted fixed calipers together with oversized discs gives the system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use. Fixed calipers improve the durability and efficiency of the system: the opposed multiple pistons act on the pads with more precision, due to the smaller piston diameter and the reduced pressure exerted on each individual piston, while the greater overall surface area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses reduce brake fluid absorption. The result is improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel. Featuring a hat in aluminium alloy, the oversized floating disc system reduces unsprung mass (for improved handling) and thermal stress. The mounting system is engineered to permit a greater degree of both radial and axial float. This characteristic, together with the greater dimensions of the braking rotor surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track. Eye-Catching and Unique Looks With a combination of painted calipers (available in red, black or silver) flaunting the Brembo logo, and slotted or cross-drilled discs, the Gran Turismo kit gives an unmistakably sporty, eye-catching look to the car, offering that extra special touch for drivers who want their vehicle to stand out from the crowd. Catering to the more discerning driver is the GT-R line of kits. These offer even more performance and consist of billet-monoblock calipers, slotted discs in diameters up to 405 mm and special high performance pads. KIT DETAILS: Brembo GT-M Systems Caliper Body: Monobloc Radial Mount Caliper Colors: Black, Red, or Silver Number of Pistons: 4 Disc Size and Construction: 332mm x 32mm Cast Iron Disc Type(s): Drilled or Slotted Disc Vane Design: Vented Straight Vane Disc Material: Cast Iron Disc to Hat Mounting: Floating H-Bobbin with Anti Rattle Spring Front or Rear System: FRONT Goodridge Stainless Steel brake lines Brembo High-Performance Brake Pads

Brembo 345x28 Floating Rotors and Two-Piece Four-Piston Calipers For Drivers Who Demand the Utmost From Their Car Designed and tested specifically for track-day enthusiasts and drivers who demand the utmost performance from their cars, these kits offer superlative performance for both everyday driving and demanding track-day sessions. Brembo kits consist of cross-drilled or slotted, ventilated two-piece discs and aluminium two-piece calipers with four pistons; a complete set of high performance pads; metal-braided hoses; and high quality hardware. Solutions and Technologies Born on the Race Track Braking systems consisting of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology. The kit consists of aluminium calipers with opposed pistons combined with cross-drilled or slotted composite oversized discs. Brembo kits combine the best solutions available to offer the perfect solution for the individual characteristics of each model. The heart of the kit consists of aluminium calipers. These are two-piece radial-mount fixed calipers machined from cast aluminium, which ensure outstanding rigidity and minimised deformation. The two-piece floating discs supplied in the kit feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%. Cross-drilled and slotted finishes are designed and executed with meticulous precision. These holes or slots in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for each application, TÜV/DOT homologated metal-braided hoses, an adapter and high-quality fastener hardware complete the kit. More Braking Torque and Thermal Capacity on Track Using radial-mounted fixed calipers together with oversized discs gives the system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use. Fixed calipers improve the durability and efficiency of the system: the opposed multiple pistons act on the pads with more precision, due to the smaller piston diameter and the reduced pressure exerted on each individual piston, while the greater overall surface area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses reduce brake fluid absorption. The result is improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel. Featuring a hat in aluminium alloy, the oversized floating disc system reduces unsprung mass (for improved handling) and thermal stress. The mounting system is engineered to permit a greater degree of both radial and axial float. This characteristic, together with the greater dimensions of the braking rotor surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track. Eye-Catching and Unique Looks With a combination of painted calipers (available in red, black or silver) flaunting the Brembo logo, and slotted or cross-drilled discs, this Brembo kit gives an unmistakably sporty, eye-catching look to the car, offering that extra special touch for drivers who want their vehicle to stand out from the crowd. KIT DETAILS: Caliper Body: Two-Piece Aluminum Radial Mount Caliper Colors: Black, Red, or Silver Number of Pistons: 4 Disc Size and Construction: 345mm x 28mm Cast Iron Disc Type: Drilled or Slotted Disc Vane Design: Vented Straight Vane Disc Material: Cast Iron Disc to Hat Mounting: Floating H-Bobbin with Anti Rattle Spring Front or Rear System: REAR Goodridge Stainless Steel brake lines Brembo High-Performance Brake Pads

Brembo 332x32 Two-Piece Floating Rotors and Four-Piston Fixed Calipers FITS (FRONT): BMW M5 (E34) 1989-1996 For Drivers Who Demand the Utmost From Their Car Designed and tested specifically for track-day enthusiasts and drivers who demand the utmost performance from their cars, these kits offer superlative performance for both everyday driving and demanding track-day sessions. Brembo kit consists of cross-drilled or slotted, ventilated two-piece discs and aluminium monobloc calipers with four pistons; a complete set of high performance pads; metal-braided hoses; and high quality hardware. Solutions and Technologies Born on the Race Track Brembo braking systems consist of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology. The kit consists of aluminium fixed-mount, two-piece calipers with opposed pistons combined with cross-drilled or slotted two-piece floating oversized discs. Brembo kits combine the best solutions available to offer the perfect solution for the individual characteristics of each model. The heart of the kit consists of aluminium calipers. These are made of two halves machined from billets of cast aluminium, ensuring outstanding rigidity and minimized deformation. The discs supplied in the kit, which are floating two-piece design, feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%. Cross-drilled and slotted finishes are designed and executed with meticulous precision. These holes or slots in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for each application, TÜV/DOT homologated metal-braided hoses, an adapter and high-quality fastener hardware complete the kit. More Braking Torque and Thermal Capacity on Track Using radial-mounted fixed calipers together with oversized discs gives the system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use. Fixed calipers improve the durability and efficiency of the system: the opposed multiple pistons act on the pads with more precision, due to the smaller piston diameter and the reduced pressure exerted on each individual piston, while the greater overall surface area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses reduce brake fluid absorption. The result is improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel. Featuring a hat in aluminium alloy, the oversized floating disc system reduces unsprung mass (for improved handling) and thermal stress. The mounting system is engineered to permit a greater degree of both radial and axial float. This characteristic, together with the greater dimensions of the braking rotor surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track. Eye-Catching and Unique Looks With a combination of painted calipers (available in red, black or silver) flaunting the Brembo logo, and slotted or cross-drilled discs, the Gran Turismo kit gives an unmistakably sporty, eye-catching look to the car, offering that extra special touch for drivers who want their vehicle to stand out from the crowd. KIT DETAILS: Brembo GT Systems Caliper Body: Aluminum, Fixed Radial Mount Caliper Colors: Black, Red, or Silver Number of Pistons: 4 Disc Size and Construction: 332mm x 32mm Cast Iron Disc Type: Drilled or Slotted Disc Vane Design: Vented Straight Vane Disc Material: Cast Iron Disc to Hat Mounting: Floating H-Bobbin with Anti Rattle Spring Front or Rear System: FRONT Goodridge Stainless Steel brake lines Brembo High-Performance Brake Pads

For drivers who demand the utmost from their car Designed and tested specifically for track day enthusiasts and for drivers who demand the utmost performance from their cars, these kits offer superlative performance for both normal driving and demanding track day sessions. Brembo kits consist of cross-drilled or slotted ventilated, one-piece or composite discs and aluminium calipers with 4, 6 or 8 pistons; a complete set of high performance pads; metal-braided hoses and high quality hardware. ​Solutions and technologies born on the race trackBraking systems consisting of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology.The kit consists of aluminium calipers with opposed pistons which, depending on the car model and in increasing order of performance, may be composite, monoblock or even billet monoblock components, combined with cross-drilled or slotted one-piece or composite oversized discs.Brembo kits combine the best solutions available to offer the perfect solution for the individual characteristics of each model.The heart of the kit consists of aluminium calipers. These are also available as monoblock parts machined from a single billet of cast aluminium, which ensure outstanding rigidity and minimised deformation. The discs supplied in the kit, which may either be floating or one-piece, depending on the specific car model, feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%.Cross-drilled and slotted finishes are designed and executed with meticulous precision. These holes or slots in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for each application, TÜV/DOT homologated metal-braided hoses, an adapter and high-quality fastener hardware complete the kit. More braking torque and thermal capacity on the trackUsing radial-mounted fixed calipers together with oversized discs gives the system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use. Fixed calipers improve the durability and efficiency of the system: the opposed multiple pistons act on the pads with more precision, due to the smaller piston diameter and the reduced pressure exerted on each individual piston, while the greater overall surface area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses reduce brake fluid absorption. The result is improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel. Featuring a hat in aluminium alloy, the oversized floating disc system reduces unsprung mass (for improved handling) and thermal stress. The mounting system is engineered to permit a greater degree of both radial and axial float. This characteristic, together with the greater dimensions of the braking rotor surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track. Eye-catching, unique looksWith a combination of painted calipers (available in red, black or silver) flaunting the Brembo logo, and slotted or cross-drilled discs, the Gran Turismo kit gives an unmistakably sporty, eye-catching look to the car, offering that extra special touch for drivers who want their vehicle to stand out from the crowd.Catering for the more discerning driver is the GT-R line of kits. These offer even more performance and consist of billet-monoblock calipers, slotted discs in diameters up to 405 mm and special high performance pads.

For drivers who demand the utmost from their car Designed and tested specifically for track day enthusiasts and for drivers who demand the utmost performance from their cars, these kits offer superlative performance for both normal driving and demanding track day sessions. Brembo kits consist of cross-drilled or slotted ventilated, one-piece or composite discs and aluminium calipers with 4, 6 or 8 pistons; a complete set of high performance pads; metal-braided hoses and high quality hardware. ​Solutions and technologies born on the race trackBraking systems consisting of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology.The kit consists of aluminium calipers with opposed pistons which, depending on the car model and in increasing order of performance, may be composite, monoblock or even billet monoblock components, combined with cross-drilled or slotted one-piece or composite oversized discs.Brembo kits combine the best solutions available to offer the perfect solution for the individual characteristics of each model.The heart of the kit consists of aluminium calipers. These are also available as monoblock parts machined from a single billet of cast aluminium, which ensure outstanding rigidity and minimised deformation. The discs supplied in the kit, which may either be floating or one-piece, depending on the specific car model, feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%.Cross-drilled and slotted finishes are designed and executed with meticulous precision. These holes or slots in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for each application, TÜV/DOT homologated metal-braided hoses, an adapter and high-quality fastener hardware complete the kit. More braking torque and thermal capacity on the trackUsing radial-mounted fixed calipers together with oversized discs gives the system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use. Fixed calipers improve the durability and efficiency of the system: the opposed multiple pistons act on the pads with more precision, due to the smaller piston diameter and the reduced pressure exerted on each individual piston, while the greater overall surface area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses reduce brake fluid absorption. The result is improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel. Featuring a hat in aluminium alloy, the oversized floating disc system reduces unsprung mass (for improved handling) and thermal stress. The mounting system is engineered to permit a greater degree of both radial and axial float. This characteristic, together with the greater dimensions of the braking rotor surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track. Eye-catching, unique looksWith a combination of painted calipers (available in red, black or silver) flaunting the Brembo logo, and slotted or cross-drilled discs, the Gran Turismo kit gives an unmistakably sporty, eye-catching look to the car, offering that extra special touch for drivers who want their vehicle to stand out from the crowd.Catering for the more discerning driver is the GT-R line of kits. These offer even more performance and consist of billet-monoblock calipers, slotted discs in diameters up to 405 mm and special high performance pads.

For drivers who demand the utmost from their car Designed and tested specifically for track day enthusiasts and for drivers who demand the utmost performance from their cars, these kits offer superlative performance for both normal driving and demanding track day sessions. Brembo kits consist of cross-drilled or slotted ventilated, one-piece or composite discs and aluminium calipers with 4, 6 or 8 pistons; a complete set of high performance pads; metal-braided hoses and high quality hardware. ​Solutions and technologies born on the race trackBraking systems consisting of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology.The kit consists of aluminium calipers with opposed pistons which, depending on the car model and in increasing order of performance, may be composite, monoblock or even billet monoblock components, combined with cross-drilled or slotted one-piece or composite oversized discs.Brembo kits combine the best solutions available to offer the perfect solution for the individual characteristics of each model.The heart of the kit consists of aluminium calipers. These are also available as monoblock parts machined from a single billet of cast aluminium, which ensure outstanding rigidity and minimised deformation. The discs supplied in the kit, which may either be floating or one-piece, depending on the specific car model, feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%.Cross-drilled and slotted finishes are designed and executed with meticulous precision. These holes or slots in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for each application, TÜV/DOT homologated metal-braided hoses, an adapter and high-quality fastener hardware complete the kit. More braking torque and thermal capacity on the trackUsing radial-mounted fixed calipers together with oversized discs gives the system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use. Fixed calipers improve the durability and efficiency of the system: the opposed multiple pistons act on the pads with more precision, due to the smaller piston diameter and the reduced pressure exerted on each individual piston, while the greater overall surface area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses reduce brake fluid absorption. The result is improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel. Featuring a hat in aluminium alloy, the oversized floating disc system reduces unsprung mass (for improved handling) and thermal stress. The mounting system is engineered to permit a greater degree of both radial and axial float. This characteristic, together with the greater dimensions of the braking rotor surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track. Eye-catching, unique looksWith a combination of painted calipers (available in red, black or silver) flaunting the Brembo logo, and slotted or cross-drilled discs, the Gran Turismo kit gives an unmistakably sporty, eye-catching look to the car, offering that extra special touch for drivers who want their vehicle to stand out from the crowd.Catering for the more discerning driver is the GT-R line of kits. These offer even more performance and consist of billet-monoblock calipers, slotted discs in diameters up to 405 mm and special high performance pads.

For drivers who demand the utmost from their car Designed and tested specifically for track day enthusiasts and for drivers who demand the utmost performance from their cars, these kits offer superlative performance for both normal driving and demanding track day sessions. Brembo kits consist of cross-drilled or slotted ventilated, one-piece or composite discs and aluminium calipers with 4, 6 or 8 pistons; a complete set of high performance pads; metal-braided hoses and high quality hardware. ​Solutions and technologies born on the race trackBraking systems consisting of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology.The kit consists of aluminium calipers with opposed pistons which, depending on the car model and in increasing order of performance, may be composite, monoblock or even billet monoblock components, combined with cross-drilled or slotted one-piece or composite oversized discs.Brembo kits combine the best solutions available to offer the perfect solution for the individual characteristics of each model.The heart of the kit consists of aluminium calipers. These are also available as monoblock parts machined from a single billet of cast aluminium, which ensure outstanding rigidity and minimised deformation. The discs supplied in the kit, which may either be floating or one-piece, depending on the specific car model, feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%.Cross-drilled and slotted finishes are designed and executed with meticulous precision. These holes or slots in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for each application, TÜV/DOT homologated metal-braided hoses, an adapter and high-quality fastener hardware complete the kit. More braking torque and thermal capacity on the trackUsing radial-mounted fixed calipers together with oversized discs gives the system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use. Fixed calipers improve the durability and efficiency of the system: the opposed multiple pistons act on the pads with more precision, due to the smaller piston diameter and the reduced pressure exerted on each individual piston, while the greater overall surface area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses reduce brake fluid absorption. The result is improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel. Featuring a hat in aluminium alloy, the oversized floating disc system reduces unsprung mass (for improved handling) and thermal stress. The mounting system is engineered to permit a greater degree of both radial and axial float. This characteristic, together with the greater dimensions of the braking rotor surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track. Eye-catching, unique looksWith a combination of painted calipers (available in red, black or silver) flaunting the Brembo logo, and slotted or cross-drilled discs, the Gran Turismo kit gives an unmistakably sporty, eye-catching look to the car, offering that extra special touch for drivers who want their vehicle to stand out from the crowd.Catering for the more discerning driver is the GT-R line of kits. These offer even more performance and consist of billet-monoblock calipers, slotted discs in diameters up to 405 mm and special high performance pads.