All

OMP Pro Mech Evo Nomex Pit Gloves Fire retardant mechanic's gloves offering excellent protection against heat and impact. Reinforcement in high impact areas with perforated soft upper fabric located in critcal impact areas (knuckels, between thumb and forefinger, lower part of the arm). Inner seams, anti-slip silicon rubber palm and fingers. FIA 8856-2018 Homologated

PFC Brake Pads 0635.97.13.44 (97 Compound) A favorite since its debut, Performance Friction 97-Compound Racing Braking Pads continue to impress, winning numerous races in CART, ALMS, Grand Am, ASA, and Club Races everywhere. The 97-Compound has less initial bite and torque then the 01, while offering great modulation, a very flat torque curve, and excellent release characteristics. A naturally low-wearing pad, the 97 compound is popular in the endurance circuits and amongst Club Racers and Track-Day enthusiasts. PFC Brake Pads 0635.08.13.44 (08 Compound) One of PFC's most popular compounds which came to fame in Endurance Sportscar and GT racing due to its performance in applications where smooth initial bite is a must. PFC08 has a slight friction rise with temperature, excellent release and modulation characteristics. Despite its considerable performance, 08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of the other competitors' materials but with much higher bite and consistent performance across a broad temperature range. PFC Brake Pads 0635.11.13.44 (11 Compound) Based on the out-going 01-compound, Performance Friction's 11-compound takes the same great high-bite and torque but with even better rotor and pad wear characteristics and improved bite, modulation, and release. Exhibiting a very high initial bite and torque, very little temperature induced torque rise follows. Less torque scatter exists for improved modulation with excellent release, helping to eliminate wheel lock at the end of a stop. Fits Mazda Miata (94-05), Front

Sparco 600 Series Seat Mounting Base Fitment for a Wide Range of Cars and Trucks Sparco 600 Series seat bases utilize the factory seat mounts on your car's or truck's floor to give you a strong, flat mounting surface for your Sparco racing seat. Sparco 600 Series seat bases are vehicle specific for an easy, bolt-in installation. The 600 Series Sparco racing seat base is constructed with 3/16" steel providing a strong, flex-free mount. Sparco 600 Series racing seat mounting bases are powder coated in a black wrinkle finish for a clean look. In addition to the mounting holes provided for standard bolt-on installation, the Sparco base has a wide metal platform for custom installation of side mounts directly to the base (drilling required). Direct installation is handy in race vehicles where the lowest seat position is desired. Note: We carry Sparco 600 Series seat mounting bases for dozens of popular fitments in stock. For less-common fitments, it may take up to 10 business days for your mounting base to ship. Photos are of various Sparco 600 Series Mounting Bases. Your seat mounting base may differ. Sparco Seat Mounting 600 Series Base Details: Manufacturer: Sparco Manufacturer part no.: 600SB Construction: 3/16" steel Finish: wrinkle-finish black powder coating Outer mounting holes for wide side-mount racing seats Mounting surface allows direct installation of side mounts (some drilling may be required) Proper Installation of Your Sparco Racing Seat Requires: (1) Sparco 600 Series Seat Mounting Base (1) Set of two side mount brackets (steel or aluminum) (1) Side mounting hardware kit (50002) Optional (1) Track Set Seat Slider (00493)1 1 The Track Set Seat Slider allows for forward and aft seat adjustment. It is not SFI or FIA certified. Check with your sanctioning body before installing. Sparco 600 Series Seat Mounting Base Part Numbers Copy the SKU from the chart below and paste it into the "Input Part Number" field above when adding to cart.

Brey Krause R-9052 Porsche Race Seat Side Mounts The Brey Krause R-9052 Seat Side Mount Adapters are designed to help install a multitude of side-mounting racing seats directly to the factory manual sliders1 used on many Porsche 991 and 981 cars. (Porsche OEM sliders are not included.) They also fit some later 997 & 987 Porsches equipped with similar tabbed sliders. Porsche factory sliders are known for their quality and strength. Along with their longer travel versus aftermarket sliders, they help retain the factory feel in your car. Brey Krause's innovative design allows the side mounts to be installed in four different positions. Combined with included spacers, they are compatible with a multitude of racing seats that are between 390 and 430mm wide. Slightly slotted side-mounting holes allow for fitment to the most popular seat manufacturers (Sparco, Recaro, OMP, Cobra, and more). The R-9052 is compatible with the Brey Krause R-9259 sub strap mount (available as an option) for use with a five- or six-point racing harness. Brey Krause R-9052 Side Mount Bracket Details: Made from 11-gauge T304 stainless steel Powder-coated in satin black Weight 5 lbs (2.3 kg) Fits all Porsche 991 & 981 cars with OEM manual seat sliders (also fits some late 997 & 987 cars with similar tabbed sliders) Fits side-mount racing seats between 390-430mm wide Maintains factory seat belt mount Download installation instructions here 1 Porsche OEM manual seat sliders (not included) are required for seat installation. The R-9052 is not compatible with Porsche power seat sliders. Not compatible with race seat sliders.

Stilo Helmet Adapter To Go To NASCAR Radio Systems Genuine Stilo to NASCAR helmet adapter cord to connect the female communication port on your Stilo Helmet to any female NASCAR-style car harness. This is the regular-length Stilo to NASCAR Adapter Cable (4C to 3C) with a 6-inch coiled section. Stilo to NASCAR Adapter Cable (4C to 3C) Details: Manufacturer: Stilo Manufacturer part number: AC0206 Helmet end: Stilo 4C (looks like IMSA, but wired differently) Chassis end: NASCAR 3C Cord type: Semi-coiled

Pagid Racing Brake Pad Shape No. 3830 USA Fits the Following Vehicles: Make Model Build (Year) Front Rear Mazda MX-5 Miata ND 16 - X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid R 01 Compound The R01 features a specially formulated compound designed for the Mazda MX5 ND race car. The R 01 excels in both street and light racing applications. This unique blend ensures consistent performance, allowing for quick heat recovery and reliable stopping power, whether you're navigating city streets or tackling a race track.

The Girodisc S/S or "street/strip" pads represent the ultimate in high performance brake pads. The semi-metallic compound maintains a consistent coefficient of friction from 0o to 1000o F, making them an ideal option for people looking for a dual-purpose pad that works really well on both the street and the race track. The formula has very little compressibility, ensuring a very firm pedal and immediate bite and making the S/S pads a favorite among autocrossers and drivers who demand the most out of their street cars. Inevitably, these will dust more than Girodisc Magic Pads, but with the included anti-noise shims that come on every set of pads, they will not make any noise when bedded-in properly. We recommend always replacing pads as a whole car set when switching compounds. All Girodisc S/S come with anti-noise shields pre-installed and included in the price. If you have any questions, give us a call at (844) 438-7244. We're happy to help!

Bell 1:2 Scale Carlos Sainz 2025 Williams F1 Mini Helmet Celebrate Carlos Sainz’s debut season with Williams Racing with this officially licensed Bell 1:2 Scale Mini Helmet. Designed for the 2025 Formula 1 World Championship, this replica captures the exact look of Sainz’s Bell HP77 race helmet—complete with Spanish flag colors, Williams blue accents, the iconic chili pepper emblem, and a star honoring María de Villota. Crafted by Bell Racing Helmets using the same manufacturing process as full-size race helmets, this premium collectible delivers exceptional detail, authenticity, and display quality. It’s the perfect centerpiece for any F1 collection and a must-have for Carlos Sainz or Williams Racing fans. Key Features Authentic 1:2 Scale Replica: Precisely reproduces Carlos Sainz’s 2025 Williams Racing Bell HP77 helmet graphics and design. Premium Construction: Built with high-quality materials for durability and a true motorsport look and feel. Perfect Display Size: Ideal for shelves, desks, offices, or display cases. Collector Presentation: Packaged in an attractive display box—excellent for gifting or preservation. Limited Edition: Exclusive 2025 collectible celebrating Sainz’s first season with Williams. Technical Details Half-scale reproduction of the Bell HP77 with Carlos Sainz’s 2025 Williams F1 helmet livery. Manufactured by Bell using the same processes as full-size racing helmets. Materials: 77% Fiber Reinforced Plastic (recyclable), 15% cotton fabric & foam, 8% hardware. Dimensions Helmet: 6.49 x 5.07 x 5.19 in (16.5 x 12.9 x 13.2 cm) Box: 180 x 135 x 140 mm Weight: 13 oz / 355 g (with packaging) For display only. Not suitable for racing or protective use. Manufacturer Part Number: 4100420 Thunder Hill | | (844) 438-7244

Thunderhill Hub-Centric Racing Wheel Spacer Kit for Ferrari Thunderhill ultra-light Ferrari hub-centric racing wheel spacers add a much-needed wider, more aggressive stance to your Ferrari. They not only enhance aesthetics, they also improve handling by giving the car a wider track. Thunderhill Ferrari spacers are CNC machined from solid forgings of the highest quality 7075-T6 aerospace-grade aluminum (our competitors use weaker -- and cheaper -- 6061 aluminum). We hard-anodized our spacers a deep black for superior durability. Taking advantage of our higher-strength material, our Ferrari spacers are engineered to incorporate a minimum of material for the lightest possible weight. Choose between 15, 18, and 20mm spacers to customize the stance of your Ferrari to your taste. INCLUDED: Two hub-centric, 7075-T6 hard anodized wheel spacers Add titanium bolts as an additional option (spacers don't include any bolts) ADD TITANIUM LUG BOLTS FOR THE ULTIMATE IN STRENGTH AND BEAUTY Machined from forgings of aerospace Grade 5 Ti-6Al-4V titanium alloy, our titanium lug bolts are an incredible 45% lighter than steel with far higher tensile strength and lower heat conductivity. Our bolt threads are rolled (never cut) to maximize their strength and durability.

7740.08.16.44 (08 Compound) One of PFC's most popular compounds which came to fame in Endurance Sportscar and GT racing due to its performance in applications where smooth initial bite is a must. PFC08 has a slight friction rise with temperature, excellent release and modulation characteristics. Despite its considerable performance, 08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of the other competitors' materials but with much higher bite and consistent performance across a broad temperature range. COMMON CALIPER FITMENT: Radical SR1

Alpinestars SP v2 Racing Shoes The redesigned Alpinestars SP v2 racing shoe is SFI 3.3/5 homologated, with an exceptional new design and premium features in an affordable shoe. Alpinestars newly-developed asymmetric lacing system gives the SP v2 a supportive, comfortable closure and customized fit. Laser cut perforations incorporated into this anatomically profiled shoe give it excellent breathability. The SP v2 also features Alpinestars' exclusive ultra-thin F1-specification sole, with special line-textured grip and improved pedal feel. The SP v2 foot counter uses multi-compound construction and an ergonomic polypropylene heel counter, providing support, protection, and stability. There's also an integrated PU fireproof heel for added safety. CONSTRUCTION Main upper constructed from premium suede for optimum durability, comfort and fit Sleek shoe profile developed in Formula 1 to offer optimized performance both in and out of the car Full tongue upper constructed from perforated leather for enhanced ventilation and optimized breathability Asymmetric toe design and traditional lacing plus hidden loops closure system for a precise, secure, personalized fit KEY FEATURES SFI 3.3/5 homologated Para-aramidic fiber tubular lining construction for excellent heat-resistance, weight-saving, and strength Collar padding constructed from nitrile rubber for comfort Lightweight micro-porous padding around the heel and insole enhances comfort SFI/Alpinestars homologation label on the tongue made from fireproof PU film transfer Alpinestars multi-compound heel counter plus integrated PU fireproof heel for comfort Alpinestars exclusive ultra-thin F1-spec sole uses an exclusive lightweight rubber textured grip for improved pedal feel

Bell Racing Helmets SE077 3mm Mirrored Helmet Shield Bell SE077 helmet shields are specifically designed for the Bell HP77 helmet. The SE077 is a 3mm, injection-molded, optically correct polycarbonate face shield with a Double Screen Anti-Fog (DSAF) insert for superior fog control. The SE077 shield uses the Bell SV (SE07, SE077) pivot kit. It is compatible with tear offs and is available in a variety of tint colors. Bell recommends that you periodically change shields for better vision and safety. All shields come with adjustable tear-off posts. (Tear-offs not included.) Bell SE077 Helmet Shield Tint Options: Silver Mirror Gold Mirror Blue Mirror Red Mirror Rainbow Iridium Mirror

Chillout Systems Insulated Coolant Y-Hose The Chillout Systems Insulated Coolant Y-Hose is made of insulated liquid-transfer tubes encased in an ultra-durable, tear-resistant fabric shield. The primary end of the hose is 6 ft. long branching off into dual 4 ft. hose ends that enable multiple cooling garments to be connected to one driver cooling unit with ¼” fittings. Hose too long for your set-up? It's easy to cut the hose to desired length. Our hoses comes with extra supply of matching shrink wrap for a flawless, clean, durable finish. FEATURES: 10-foot overall length, includes additional heat shrink tubing for custom sizing while maintaining a finished look Male connectors, four pieces Female dual-prong connector to connect cooler, one piece Can be connected to other hoses to extend length including additional Y-connector Double-insulation: one layer to protect the hoses and insulation, the other to keep your coolant cool and efficient

Racetech Ram Air Ducting Kit Now you can provide forced air induction to your Racetech 119 or 129 series race seat. Increase driver comfort by removing latent heat to the lower back. Especially useful in longer or enduro race events, this air-cooling maintains a level of comfort for the driver, enabling optimum performance and less heat stress and fatigue. KIT INCLUDES: 12V inline blower motor @122 CFM. Silicone reducer (76mm to 51mm). Four-foot high-temp duct hose. Two tie wraps. For maximum cooling performance, use with NACA duct and 3” intake hose.

Sparco Tide-K Kart Racing Gloves The Tide-K is a revolutionary karting glove utilizing cutting edge technology to provide incredible grip, shock absorption, and comfort. Featuring an anatomically correct palm that contours to the natural shape of the hand, the palm of the Tide-K glove is made from advanced 3D HTX, a Sparco-exclusive material that increases grip, absorbs vibrations and increases dexterity. The hollow volcano shape of the HTX material was specially arranged to increase durability. The Tide-K has a touch sensitive index finger and thumb for use with touch screen electronic devices such as data logging. External stitch seams and an elastic wrist improves fit and comfort. TECHNOLOGY Anatomically correct palm that contours to the natural shape of the hand Advanced 3D HTX, a Sparco-exclusive material that increases grip, absorbs vibrations and increases dexterity The hollow volcano shape of the HTX material was specially arranged to increase durability “Touch Sensitive” finger tips compatible with touch screen data acquisition and lap timer apps.

OMP KS-2 Kart Racing Shoe OMP's KS-2 Karting shoes feature a modern and fresh design and lightweight microfiber construction with full-sized mesh inserts. The KS-2 kart racing shoes feature a modern no-lace design complimented with a velcro ankle adjuster for optimal fit. OMP's custom out sole is engineered specifically for kart racing, while an elastic, padded ankle makes for excellent comfort and fit.