Sparco ADV Elite carbon fiber racing seat designed for rally racing in stock at the lowest price
Sparco Sparco ADV Elite Carbon Racing Seat $8,000.00
The Sparco ADV Elite is an extremely strong, ultra-light weight carbon fiber seat designed to pass the FIA’s highest seat rating FIA 8862-2009. This means that the ADV Elite has been tested to an impact of approximately 70G. This rating is required for WRC racing, and the ADV Elite was specially designed with an upright driving position preferred by rally drivers. In addition to the Sparco ADV Elite's rally driving position, the outer dimensions have been reduced to fit into typically smaller WRC cockpits. With strength at the top of its class, the ADV Elite can withstand over 6,600 lbs. of lateral force. The ADV Elite has an energy absorbing system in the areas subjected to the highest stress to protect the driver. The entire seat is covered in self-extinguishing fabric and special non-slip fabric in the shoulders and seat area. Sparco ADV Elite Carbon Racing Seat Details: Ultra-light weight Carbon Fiber construction FIA 8862-2009 approved Testing to an impact of 70G Designed for WRC Rally cockpits & driver position Hans device compatible Fire retardant fabric Special non-slip fabric Racing Seat Dimensions:
The Sparco ADV XTS carbon fiber racing seat is in stock at the lowest price only at Thunderhill
Sparco Sparco ADV XT Carbon Racing Seat $8,000.00
Sparco ADV XT Carbon Racing Seat The Sparco ADV XT is an extremely strong, ultra-light weight carbon fiber seat designed to pass the FIA’s highest seat rating, FIA 8862-2009. This means the Sparco ADV XT has been tested to an impact of approximately 70G. This rating is required for GT racing, and the ADV XT was specially designed with a more relaxed, comfortable driving position for GT cockpits. With strength at the top of its class, the ADV XT can withstand over 6,600 lbs. of lateral force. The ADV XT has an energy absorbing system in the areas subjected to the highest stress to protect the driver. The entire seat is covered in self-extinguishing fabric, plus a special non-slip fabric in the shoulders and seat area. The Sparco ADV XT is FIA approved when installed with Sparco 004902 side-mount brackets. Sparco ADV XT Carbon Racing Seat Details: Ultra-light weight carbon fiber construction FIA 8862-2009 approved Tested to an impact of 70G Designed for GT cockpits with more relaxed driver position HANS device compatible Fire retardant fabric Special non-slip fabric Racing Seat Dimensions:
Sparco SPX Carbon Reclining Seat (Non-FIA)
Sparco Sparco SPX Carbon Reclining Seat (Non-FIA) $3,300.00
Sparco SPX Reclining Seat (non-FIA) The SPX is handcrafted in Italy using the same technology and materials used for OEM super cars. In fact, the SPX is the first carbon fiber reclining seat available to the public that meets the same specifications required by the OEM manufacturers. What this means is that the attention to detail and quality put into the SPX cannot be matched by any other seat manufacturer on the market today. The Sparco SPX seat represents the ultimate evolution of the sport seat. The SPX uses a combination of carbon fiber and advanced composites that give the driver both comfort and performance in a lightweight package. With the ergonomic shape of the carbon fiber backrest and the seating position of the RTM composite lower, the SPX holds the driver during extreme lateral forces and is comfortable for long road trips. The SPX is covered in a combination of beautiful perforated and smooth Italian leather. The center of the SPX is covered in Alcantara suede to allow you to gain absolute control of your vehicle and enhance your driving experience. To finish off the performance look, all hand stitching is done in tone-on-tone black with the Sparco logo embroidered in matching black. The gloss finished carbon fiber backrest features a leather pull strap which releases the backrest to fold forward to allow access to a backseat or storage area. The backrest also features a micro adjustment knob that allows you to dial in the perfect driving position. The SPX is sold in driver and passenger versions (left and right). TECHNOLOGY Lightest carbon fiber reclining seat on the market Gloss carbon fiber back rest RTM composite lower (an advanced composite with strength and weight similar to carbon fiber) Covered in hand-stitched Italian leather and Alcantara suede Leather pull for seat back release Sold in driver (left) and passenger (right) versions SPX DIMENSIONS A LITTLE HISTORY Sparco has designed and engineered some of the most advanced sport seats in the world, including the first-ever adjustable carbon fiber seat in 1998 for the Lamborghini Diablo. Since then, countless super cars such as the Bugatti Veyron and Lamborghini Aventador have used Sparco design and technology in their vehicles. In addition to seats, Sparco also produces carbon fiber body panels, bumpers, roofs and aerodynamic pieces, in addition to structural carbon fiber parts like stressed-member engine cradles and other chassis parts. Supplying OEM manufacturers requires every part to pass demanding safety and durability tests. Sparco’s extensive expertise in carbon fiber technology is why they're a Tier One supplier for Alfa Romeo, AMG, Aston Martin, Audi, Bentley, Bugatti, Ferrari, Koenigsegg, Lamborghini and Lotus to name a few.
Sparco QRT-C Performance Carbon Racing Seat
Sparco Sparco QRT-C Performance Carbon Racing Seat $2,299.00
Sparco QRT-C Performance Carbon Racing Seat The QRT-C Performance Carbon seat represents the luxury evolution of the QRT-C race seat. The QRT-C Performance Carbon uses the same FIA approved light-weight all-carbon fiber race shell as the QRT-C race seat but is covered in Italian Leather and Alcantara. The QRT-C Performance Carbon is constructed from “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. The seats are handstitched in the Sparco OEM factory in Torino Italy. The QRT-C Performance Carbon has a unique CAD design that features a lower seating position that can fit a larger/taller driver with the exterior dimensions that can fit into smaller cockpits. The QRT-C Performance can hold the driver during extreme lateral forces, but is also comfortable for long road trips. The QRT-C Performance Carbon seat is FIA Approved. SIZING Large – up to a 36” waist (pants size) WHAT IS QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength-to-weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. TECHNOLOGY Ultralight Carbon Fober Shell Excellent fitment into small cockpits Medium/Large size driver fitment Excellent ergonomics Fire retardant fabric Special non-slip fabric FIA approved QRT-C PERFORMANCE CARBON DIMENSIONS
Sparco Prime Driver Suit 2022
Sparco Sparco Prime Driver Suit 2022 $2,200.00
Sparco Prime Driver Suit 2022 The Sparco Prime suit was developed for the McLaren Formula One team and is one of the lightest FIA 8856-2018 approved racing suits in the world. The Prime has unparalleled technological features created in the Sparco R&D laboratories. The project involved optimizing every single detail in terms of material and construction. This includes an ultra slim zipper, soft seamless Nomex/Vicosa wrists and ankle cuffs, the neck and shoulder pads were further reduced, thinner thread was used and stitching flattened. The Prime LT features a 3 layer construction of proprietary Sparco technology. The third outer layer is a double faced mesh made from original DuPont Nomex Comfort woven using Kompact system. The material contains a high percentage of antistatic fibers which provide extremely effective antistatic properties as well as breathability. Prime features pre-curved arms and legs as well as an inner thigh stretch panel for ultimate comfort. The Prime is available in 3 colorways in sizes 48-66. FIA and SFI Approved. TECHNOLOGY FIA 8856-2018 and SFI 3.2A/5 Approved Exclusive DuPont Nomex fibers provide superior fire protection and comfort Pre-curved Arms and Legs Lightweight zipper and collar Inner Thigh Stretch Panel FIA and SFI approved
Sparco Eagle 2.0 Driver Suit
Sparco Sparco Eagle 2.0 Driver Suit $1,699.00
Sparco Eagle 2.0 Driver Suit The Eagle 2.0 is newest evolution of the Eagle suit. The new Eagle 2.0 features an updated, softer HOCOTEX® material which is 30% thinner. The Eagle 2.0 features an all-new design with four new colorways. The Eagle 2.0 carries the newest FIA homologation. SINGLE LAYER CONSTRUCTION, MULTI-LAYER PERFORMANCE The Eagle 2.0 is the result of over 3 years of research and development. Sparco has patented a new technology called HOCOTEX® which revolutionizes the way racing suits are made. This new exclusive Sparco technology creates a single layer fabric which has the protection of what is normally achieved by a multi-layer fabric. The Eagle 2.0 is FIA 8856-2018 homologated. UNPRECEDENTED COMFORT Thanks to HOCOTEX®, the Eagle 2.0 is three times more breathable than a suit produced using traditional technology. The use of this relatively thinner fabric along with large side and back stretch panels and 360 degree arm gussets give the Eagle 2.0 ultimate flexibility and comfort. The Eagle 2.0 uses at new stretch material called Eagle fabric, which is lighter, more breathable, and more abrasion resistant than traditional stretch material. IMPROVED FIRE RESISTANCE Traditional racing suits have layers of fabric sewn together in a quilted pattern. The quilting provides air space between the layers which bloats in a fire, this provides thermal protection to the driver. HOCOTEX® creates a honeycomb structure with internal air cells that ensure the driver even more fire protection. Traditional box quilting creates an average of 300 air chambers in a size 52 suit. The Eagle 2.0 has over 60,000 microcell air chambers which provide a 10 to 12% increase in heat protection performance. TECHNOLOGY Single layer construction, multi-layer protection 3X more breathable than a standard suit with full 360o arm gussets Large stretch panels on sides and back with new breathable fabric Reinforced arms and legs with anti-abrasive material Three years of research and development HOCOTEX® patented Sparco Technology made in Italy Available in four colorways FIA 8856-2018 homologated
Sparco QRT-C Carbon Racing Seat
Sparco Sparco QRT-C Carbon Racing Seat $1,699.00
Sparco QRT-C Carbon Racing Seat The QRT-C is an all-carbon fiber version of the QRT-R. The QRT-C is the lightest “large” size carbon fiber seat on the market. The QRT-C weighs 12.5lbs (with padding and cover) and is constructed from “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. The QRT-C was specifically designed for a large driver and it fits up to a 36” waist driver comfortably. The QRT-C is unique because it was designed to fit a larger driver but has excellent fitment into smaller cockpits The QRT-C requires the special QRT Side Mounts (#600QRT) which allows the seat to be racked back for a comfortable seating position. The QRT-C is FIA approved. SIZING Large – up to a 36” waist (pants size) WHAT IS QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength-to-weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. TECHNOLOGY Ultralight Carbon Fiber - 12.5lbs fully trimmed weight Excellent fitment into small cockpits Large size driver fitment Excellent ergonomics Fire retardant fabric Special non-slip fabric FIA approved QRT-C CARBON DIMENSIONS
Sparco QRT-K Carbon Kevlar Racing Seat
Sparco Sparco QRT-K Carbon Kevlar Racing Seat $1,699.00
Sparco QRT-K Carbon Kevlar Racing Seat The QRT-K is a full Carbon Kevlar version of the QRT-R. The QRT-K looks amazing with the exposed yellow/black Carbon Kevlar weave. The QRT-K is one of the lightest seats on the market. The QRT-K weighs 13.5lbs fully trimmed (with padding, cover and harness guides) and is constructed from “Pre-Preg” aerospace grade Carbon Kevlar. The QRT-K was specifically designed for a larger driver and it can fit a 36” waist (pants size) driver. The QRT-K is unique because it was designed to fit a larger driver but has excellent fitment into smaller cockpits. The QRT-K requires the special QRT Side mounts (#600QRT) which allows the seat to be raked back for a comfortable ergonomic seating position. The QRT-K is FIA approved. SIZING Large fits up to a 36” waist (pants size) WHAT IS QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength-to-weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. TECHNOLOGY Ultralight Carbon Kevlar Composite Shell - 13.5lbs including cover and padding Visible carbon kevlar weave Excellent fitment into small cockpits Large size driver fitment Excellent ergonomics Fire retardant fabric Special non-slip fabric FIA approved QRT-K CARBON KEVLAR DIMENSIONS
Sparco Superleggera Race Suit
Sparco Sparco Superleggera Race Suit $1,699.00
Sparco Superleggera Race Suit The Sparco Superleggera race suit is the lightest FIA 8856-2018 approved suit on the market. The Superleggera is not only lightweight but it is also one of the most comfortable Sparco race suits available. It features a special 4-way stretch panel that runs from the underarm down to the hip. Those side stretch panels combined with the rear stretch panel give ultimate mobility when in the seated positions. The Sparco Superleggera fire resistant auto race suit also has a breathable inner thigh stretch panel, 360 floating arm gussets and pre-curved arms and legs. The Sparco Superleggera auto race suit is FIA and SFI homologated. SPARCO SUPERLEGGERA RACE SUIT TECHNOLOGY FIA 8856-2018 and SFI 3.2A/5 Approved Lightest FIA suit on the market Pre-curved Arms and Legs Lightweight zipper and collar Inner Thigh Stretch Panel 4-Way Stretch Panels
Sparco  Evo Carbon Fiber 008007ZNR Race Seat
Sparco Sparco EVO Carbon Fiber (STD, L, XL) Racing Seat $1,699.00
Sparco EVO Carbon Fiber Racing Seats As Sparco's most well known competition seat, it was a no-brainer to provide the refreshed Evo with Sparco's QRT Ultra-Light Technology. Not content to leave well enough alone, Sparco went a step further by improving the overall fit and feel of the Sparco Evo Carbon Fiber. Starting with the shoulder bolsters, Sparco trimmed down the width to help fitment into smaller cars without sacrificing support. Sparco then lowered the side bolsters just enough to improve ingress/egress into/out of the car. Finally, the shoulder belt guides have been raised for improved harness fit in all drivers. With small sports cars in mind (the Sparco Evo Carbon Fiber fits perfectly in a Miata!), the Sparco Evo Carbon Fiber is sure be a mainstay at the track! The EVO Carbon is the all-carbon fiber version of the EVO QRT. It is constructed with “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. EVO Carbon is one of the lightest carbon fiber seats on the market. It weighs less than 10lbs (shell only) and 12lbs (with padding and cover). The EVO Carbon is has excellent fitment into smaller cockpits. The EVO series of seats feature the most back angle rake of all Sparco seats for a very comfortable driving position. It also has high grip material in strategic places such as the shoulder bolsters and seat bottom to aid in lateral support. The EVO Carbon is FIA 8859-1999 approved. SIZINGEVO CARBON – Medium (up to 34” waist)EVO L CARBON – Large (up to 36” waist)EVO XL CARBON – X-Large (38” waist) The Sparco EVO QRT Racing Seat TECHNOLOGY Ultralight Pre-Preg Carbon Fiber shellExcellent fitment into small vehicle cockpits3 Sizes: Medium through XLExcellent ergonomicsFire retardant fabricSpecial non-slip fabricFIA 8859-1999 approved The Sparco EVO CARBON FIBER Racing Seat SIZING The Sparco EVO series is among the most versatile competition seats we carry, available in the following four sizes to ensure proper fitment: EVO 008007ZNR – Medium (up to 34” waist) EVO L 008013ZNR – Large (up to 36” waist) EVO XL 008015ZNR – Extra Large (38” waist) The Sparco EVO Carbon Fiber Racing Seat DIMENSIONS EVO Std Dimensions: EVO L / XL Dimensions:
Sold out -21% sale
Sparco Circuit Carbon Fiber Racing Seats (Circuit II QRT) - Large
Sparco Sparco Circuit Carbon Fiber Racing Seats (Circuit II QRT) - Large $1,599.00 $1,999.00
Sparco Circuit Carbon Fiber Racing Seats (Circuit II QRT) - Large    Hey Speed Demons and Track Day Titans!  Get ready to buckle up in the Sparco Circuit Carbon Fiber Racing Seat (Circuit II QRT), where cutting-edge technology meets the thrill of the race. This isn't just a seat; it's your throne as you conquer the track! Why It's Not Just a Seat, It's a Game-Changer: Ultralight Pre-Preg Carbon Fiber Shell: Imagine strapping into a seat so light yet so strong, it feels like it's from the future. Thanks to aerospace-grade carbon fiber, this seat is like wearing a feather - if the feather was also indestructible. Wider is Better: The Circuit II Carbon is the Arnold Schwarzenegger of racing seats - a wider version of its sibling, ensuring that even the burliest racers up to a 36” waist fit comfortably. Safety First, But Make It Stylish: With integrated bolsters for head protection and compatibility with FHR devices, it's like having a personal bodyguard, but way cooler. Feel the Grip: High grip material in strategic places means you're glued in place, even if you're pulling Gs like you're in a fighter jet. Fire-Resistant Fabric: Because the only thing that should be on fire is your lap time. Special Non-Slip Fabric: It's like the seat is giving you a reassuring hug, saying, "I got you," as you take those corners at breakneck speeds. FIA 8859-1999 Approved: This seat doesn't just meet standards; it laps them. QRT Technology - Because Weight Matters: Developed in Sparco's top-secret Italian lab (probably next to a gelato shop), QRT technology is like alchemy for seats. It magically reduces weight by up to 30% compared to others. Lighter seat, faster you! Feel the Experience: Imagine sliding into this seat. You're not just sitting; you're being cradled by cutting-edge technology. As you grip the wheel, the non-slip fabric grips you back. You're one with the car. Each turn, each lap, you're not just driving; you're performing a high-speed ballet, and the Circuit II QRT is your dance partner. Specifications: Ultralight Pre-Preg Carbon Fiber Shell Excellent Ergonomics for Comfort and Control Fire-Retardant Fabric for Safety Special Non-Slip Fabric for Extra Grip FIA 8859-1999 Certification for Peace of Mind Large Size: Up to a 36” Waist Ready to Ride? Don't just dream about the perfect race. Live it. The Sparco Circuit Carbon Fiber Racing Seat (Circuit II QRT) is waiting for you. It's not just a seat; it's your ticket to an exhilarating racing experience.
Sparco QRT Performance racing seat at the lowest price and best customer service
Sparco Sparco QRT Performance Racing Seat $1,499.00
Sparco QRT Performance Racing Seat An Amazingly Light and Supremely Comfortable Racing Seat The Sparco QRT Performance seat represents the luxury evolution of Sparco's revolutionary QRT-R race seat. The QRT-R was the first seat to feature Sparco’s patented lightweight QRT technology, and the QRT Performance uses the same FIA race shell but is covered in rich Italian leather and Alcantara. Each Sparco QRT Performance is hand-stitched in the Sparco OEM factory in Torino, Italy. The QRT Performance has a unique CAD design featuring a lower seating position for taller drivers while maintaining exterior dimensions that fit into smaller cockpits. The QRT Performance holds the driver securely on the race track and is also comfortable for long trips on the road. Experience Sparco's Fantastically Innovative QRT Technology Sparco QRT technology yields an unparalleled mechanical strength/weight ratio for fiberglass composite racing seats. This translates to an average weight savings of 30% when compared to standard fiberglass technology. So Sparco QRT racing seats approach the weight of carbon fiber at the price of fiberglass composite. The Sparco QRT Performance Racing Seat requires the Sparco #600QRT side mounts for proper installation. Sparco QRT Performance Racing Seat Details: FIA approved OEM Italian leather and Alcantara Ultra-light QRT fiberglass composite shell reduces weight up to 30% Lower seating position can fit taller/larger drivers Smaller outer dimensions for improved vehicle fitment Available in Black or Red Racing Seat Dimensions:
-31% sale
Sparco Circuit Carbon Fiber Racing Seats (Circuit II QRT) - Large 2028
Sparco Sparco Circuit Carbon Fiber Racing Seats (Circuit II QRT) - Large 2028 $1,399.00 $1,999.00
Sparco Circuit Carbon Fiber Racing Seats (Circuit II QRT) - Large    Hey Speed Demons and Track Day Titans!  Get ready to buckle up in the Sparco Circuit Carbon Fiber Racing Seat (Circuit II QRT), where cutting-edge technology meets the thrill of the race. This isn't just a seat; it's your throne as you conquer the track! Why It's Not Just a Seat, It's a Game-Changer: Ultralight Pre-Preg Carbon Fiber Shell: Imagine strapping into a seat so light yet so strong, it feels like it's from the future. Thanks to aerospace-grade carbon fiber, this seat is like wearing a feather - if the feather was also indestructible. Wider is Better: The Circuit II Carbon is the Arnold Schwarzenegger of racing seats - a wider version of its sibling, ensuring that even the burliest racers up to a 36” waist fit comfortably. Safety First, But Make It Stylish: With integrated bolsters for head protection and compatibility with FHR devices, it's like having a personal bodyguard, but way cooler. Feel the Grip: High grip material in strategic places means you're glued in place, even if you're pulling Gs like you're in a fighter jet. Fire-Resistant Fabric: Because the only thing that should be on fire is your lap time. Special Non-Slip Fabric: It's like the seat is giving you a reassuring hug, saying, "I got you," as you take those corners at breakneck speeds. FIA 8859-1999 Approved: This seat doesn't just meet standards; it laps them. QRT Technology - Because Weight Matters: Developed in Sparco's top-secret Italian lab (probably next to a gelato shop), QRT technology is like alchemy for seats. It magically reduces weight by up to 30% compared to others. Lighter seat, faster you! Feel the Experience: Imagine sliding into this seat. You're not just sitting; you're being cradled by cutting-edge technology. As you grip the wheel, the non-slip fabric grips you back. You're one with the car. Each turn, each lap, you're not just driving; you're performing a high-speed ballet, and the Circuit II QRT is your dance partner. Specifications: Ultralight Pre-Preg Carbon Fiber Shell Excellent Ergonomics for Comfort and Control Fire-Retardant Fabric for Safety Special Non-Slip Fabric for Extra Grip FIA 8859-1999 Certification for Peace of Mind Large Size: Up to a 36” Waist Ready to Ride? Don't just dream about the perfect race. Live it. The Sparco Circuit Carbon Fiber Racing Seat (Circuit II QRT) is waiting for you. It's not just a seat; it's your ticket to an exhilarating racing experience.
-34% sale
Sparco Prime LT Driver Suit - Limited Edition
Sparco Sparco Prime LT Driver Suit - Limited Edition $1,395.00 $2,100.00
Sparco Prime LT Driver Suit Limited Edition The Prime LT is a limited edition suit available only for the US market. The Prime LT features an all-new design in two colorways. This is a limited edition suit, only available for 2021 (while supplies last). The Prime LT is the same suit material developed for the Mclaren F1 team and is one of the lightest FIA approved racing suit in the world. The Prime LT has unparalleled technological features created in the Sparco R&D laboratories. The project involved optimizing every single detail in terms of material and construction. This includes an ultra slim zipper, soft seamless Nomex/Vicosa wrists and ankle cuffs, the neck and shoulder pads were further reduced, thinner thread was used and the stitching flattened even more. The Prime LT features a 3 layer construction of proprietary Sparco technology. The third outer layer is a double faced mesh made from original DuPont Nomex Comfort woven using the Kompact system. The material contains a high percentage of antistatic fibers which provide extremely effective antistatic properties as well as breathability. The suit weighs from 240 to 270 gr per square meter (depending on size). TECHNOLOGY Lightest FIA approved suit in the world Exclusive DuPont Nomex fibers provide superior fire protection and comfort Pre-curved Arms and Legs Lightweight zipper and collar Breathable stretch panels FIA approved
-31% sale
Sparco Prime SP-16.1 Driver Suit
Sparco Sparco Prime SP-16.1 Driver Suit $1,395.00 $1,999.00
Sparco Prime SP-16.1 Driver Suit SAVE $$$ The Prime SP-16.1 suit was made in collaboration with the Mclaren F1 team and is the lightest FIA approved racing suit in the world. The Prime SP-16.1 has unparalleled technological features created in the Sparco R&D laboratories. The project involved optimizing every single detail in terms of material and construction. This includes an ultra slim zipper, soft seamless Nomex/Vicosa wrists and ankle cuffs, the neck and shoulder pads were further reduced, thinner thread was used and stitching flattened even more. The Prime SP-16.1 features a 3 layer construction of some of the some proprietary Sparco technology. The third outer layer is a double faced mesh made from original DuPont Nomex Comfort woven using Kompact system. The material contains a high percentage of antistatic fibers which provide extremely effective antistatic properties as well as breathability TECHNOLOGY: Lightest FIA approved suit in the world The suit weighs only 240/270 gr per square meter. Exclusive DuPont Nomex fibers provide superior fire protection and comfort Pre-curved Arms and Legs Strategic Stretch panels Seamless arm and leg cuffs Available in white or black Available in sizes 48-66 FIA 8856-2000 Approved.
-24% sale
Sparco Superleggera Race Suit (Discontinued Colorways)
Sparco Sparco Superleggera Race Suit (Discontinued Colorways) $1,299.00 $1,699.00
Sparco Superleggera Race Suit The Sparco Superleggera race suit is the lightest FIA 8856-2018 approved suit on the market. The Superleggera is not only lightweight but it is also one of the most comfortable Sparco race suits available. It features a special 4-way stretch panel that runs from the underarm down to the hip. Those side stretch panels combined with the rear stretch panel give ultimate mobility when in the seated positions. The Sparco Superleggera fire resistant auto race suit also has a breathable inner thigh stretch panel, 360 floating arm gussets and pre-curved arms and legs. The Sparco Superleggera auto race suit is FIA and SFI homologated. SPARCO SUPERLEGGERA RACE SUIT TECHNOLOGY FIA 8856-2018 and SFI 3.2A/5 Approved Lightest FIA suit on the market Pre-curved Arms and Legs Lightweight zipper and collar Inner Thigh Stretch Panel 4-Way Stretch Panels

Sign Up and Save

Subscribe to our eNewsletter to learn about events near you, great deals, new products and for tips to improve your creator skills.