Sparco

Sparco Pro ADV QRT Racing Seat The Pro-ADV competition seat is the result of a collaborative partnership between Sparco and FIA. The goal was to identify ways to improve safety. The results are new levels in ergonomics, materials and above all safety, are all found in the Pro-ADV seat. Increased rigidity and the use of impact-absorbing materials are the major advances found in the Pro-ADV.The new PRO ADV QRT is an upgraded evolution of the original PRO ADV. The new PRO ADV QRT features a new head restraint redesign that allows better fitment with vehicles with smaller cockpits. The PRO ADV QRT will fit a medium/large size driver (up to 35 inch waist). The Pro ADV QRT is made with all-new QRT Technology which results in an ultra-light shell. The Pro-ADV QRT is FIA-approved. WHAT IS QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength to weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. TECHNOLOGY QRT Ultralight fiberglass composite shell Excellent head and shoulder protection Special non-slip fabric for shoulders and bottom cushion Excellent ergonomics Fire retardant fabric FIA approved DIMENSIONS

Sparco Sky RF-7W Carbon SA2020 The Sparco Sky RF-7W has a carbon fiber outer shell reinforced with layers of carbon-kevlar composite. The RF-7W Carbon includes a wider eye opening making it ideal for both open-wheel and closed-cockpit racing. Multiple exterior vents increase air circulation throughout a redesigned interior. Integrated channels not only direct cool air onto the driver's head, some also route air towards the visor reducing the chance of fogging. The Sparco Sky RF-7W Carbon has removable, washable interior padding that's easy to reposition for a customized, comfortable fit. All interior seams have been removed from areas where pressure is exerted on the head. The Sparco Sky RF-7W has been designed to accommodate a drink tube and an intercom system (each sold separately). Available in sizes X-Small to X-Large (including new Medium/Large size using Sparco's smaller, lighter shell) with a red or black interior. The Sparco Sky RF-7W Carbon Fiber has HANS posts pre-installed and is both Snell SA2020 and FIA 8859-2015 approved. Additional Sparco Sky RF-7W Carbon Fiber helmet shields available here. Sparco Sky RF-7W Carbon Fiber Helmet Details: Snell SA2020 and FIA 8859-2015 certified Wind tunnel optimized venting with anti-fog air channels Lightweight carbon fiber with carbon-kevlar base layers Choose red or black interior lining color Removable, washable lining Pre-molded interior to accommodate drink tube and intercom system (sold separately) New "Medium/Large" size uses Sparco's lighter and more compact shell HANS posts pre-installed Anodized aluminum chin strap hardware How To Measure Your Head Properly The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

Sparco Victory Driver Suit FIA 8856-2018 The lightweight and breathable Sparco Victory racing suit is feature packed with lightweight HOCOTEX fabric construction, comfort stretch panels, and is dual SFI 3.2/5a and FIA 8856-2018 homologated. Built in Italy with pride, the new lightweight and breathable Sparco Victory 2023 brings the performance of competitor's suits that have double the cost to weekend racers. It's hard to improve on a classic, but Sparco has done just that with the updated Victory racing suit! Built from the popular Victory racing suit that brought HOCOTEX technology at the $1050 price point. Largely keeping the popular Victory classic design with modern color options, the new Victory 2023 suit takes things a step further with an improved cut, style, and fit. An improved stretch panel on the lower-back further improves mobility, while preformed sleeves maintain excellent steering performance. Sparco's unique HOCOTEX technology makes use of an intricate honeycomb structure that contains thousands of protective microcapsules built into a super-thin and breathable fabric weave. Twice as breathable as other entry-level suits, these insulating compartments replace the multi-layer fabric construction found in every other suit on the market, all while maintaining dual SFI 3.2A/5 & FIA 8856-2018 certifications for zero compromise in protection! SPARCO VICTORY DRIVER RACE SUIT FEATURES Soft and Lightweight Two times more breathable than a standard suit Single Layer Construction, Multi-Layer Protection Hidden front pockets Full-floating, pre-formed sleeves with stretch panels Additional stretch gusset in shoulder and armpit sections 3 Years of Research and Development HOCOTEX® Patented Sparco Technology – Made in Italy Only single layer SFI 3.2A/5 suit on the market Rating: FIA 8856-2018 & SFI 3.2a/5 SPARCO VICTORY DRIVER RACE SUIT SIZE CHART

Sparco EVO XL QRT-X Racing Seat Feel the track beneath you and conquer each curve as you settle into the Sparco EVO XL QRT X-Range, the throne of speed designed exclusively for the true racing enthusiast. With state-of-the-art technology and unmatched comfort, this seat isn’t just part of your car; it’s your partner in the race against time. Features and Benefits: Advanced QRT Technology: Utilizing Sparco's patented Quick Resin Tech, the EVO XL QRT X boasts an ultralight fiberglass composite shell, reducing weight by up to 30% compared to traditional seats. Feel the difference as this feather-light yet rugged seat bolsters your control and speed. Water Repellant and Dust Resistant: The innovative seat cover not only repels water but dries quickly, making it perfect for unpredictable weather. The dust-resistant material keeps your cockpit pristine and maintenance low. Enhanced Comfort and Ergonomics: With additional padding atop the side bolsters, the discomfort of climbing in and out is a thing of the past. The seat's back angle offers the most recline in Sparco's range, ensuring a comfortable drive, no matter the distance. Optimal Fit for All Sizes: Available in three sizes—Medium, Large, and X-Large—this seat ensures a perfect fit for every driver, supporting a waist size up to 38 inches. Safety First: FIA approved and crafted with fire retardant fabric and special non-slip material, the EVO XL QRT X doesn’t just elevate your driving experience; it enhances your safety on the track. Specifications: Sizing Options: Medium (up to 34” waist), Large (up to 36” waist), X-Large (38” waist) Materials: Ultralight QRT fiberglass composite, water repellant and dust resistant cover, fire retardant and non-slip fabric Approval: FIA certified FAQs: Q: How do I clean the seat cover? A: Simply wipe down with a damp cloth. The water-repellant and dust-resistant features make cleaning effortless. Q: Can this seat fit into any racing vehicle? A: Absolutely! Its excellent fitment is designed for even the smallest cockpits, making the EVO XL QRT X a versatile choice for any racer. Call to Action: Ready to feel every turn and accelerate your racing performance? Upgrade to the Sparco EVO XL QRT X-Range Racing Seat today and transform your car into a champion’s chariot. Click here to claim your seat at the front of the pack!

Sparco Pro 2000 QRT Martini Racing Seat SIZE: Medium, up to a 34” waist (as measured) The Pro 2000 QRT Martini Racing Edition is a limited production seat. It features the Iconic Martini Racing stripes and is available in period correct Navy or Grey. The Pro 2000 QRT Martini Edition is designed for a medium size driver with a waist size up to 34 inches. The Pro 2000 QRT Martini Edition is our deepest bolstered seat that gives excellent lateral support. It also features removable/adjustable lumbar cushions and non-slip fabric on the shoulder and bottom cushion areas for improved seat comfort. The Pro 2000 QRT Martini Edition is made with all-new QRT Technology which results in an ultra-light shell. The shoulder harness openings have been raised and the seat area around the mid-section has been reshaped for less interference when compared to the original Pro 2000. The Pro 2000 QRT Martini Edition is a unique FIA seat as it can be bottom mounted in addition to the traditional side mounting. This gives additional installation options. EVOLUTION OF AN ICON The Pro 2000 QRT is an evolution of Sparco's iconic Pro 2000 seat. The Pro 2000 QRT has been upgraded with new ergonomics and technology. It is designed for a medium size driver with a waist size up to 34 inches. The Pro 2000 QRT is our deepest bolstered seat that gives excellent lateral support. It also features removable/adjustable lumbar cushions and non-slip fabric on the shoulder and bottom cushion areas for improved seat comfort. The Pro 2000 QRT is made with all-new QRT Technology which results in an ultra-light shell. The shoulder harness openings have been raised and the seat area around the mid-section has been reshaped for less interference when compared to the original Pro 2000. The Pro 2000 QRT is FIA approved. WHAT IS QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process based on aerospace technologies. QRT creates an unparalleled mechanical strength-to-weight ratio, generating the lightest fiberglass composite seat shells currently on the market. In fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. TECHNOLOGY QRT ultra-light fiberglass composite shell Excellent fitment into small cockpits Adjustable lumbar cushions Excellent ergonomics Fire retardant fabric FIA approved DIMENSIONS

Sparco Air Pro RF-5W: Retro Inspired From 1977 The Air Pro RF-5W 1977 is a painted version of the Sparco Air Pro RF-5W. This retro inspired helmet has a white base with blue or red stripes beneath a durable clear coat finish. The Sparco Air Pro RF-5W 1977 features a carbon-kevlar and fiberglass construction with a wider eye opening that can be used for open wheel or closed cockpit driving. Multiple exterior vents increase air circulation throughout a redesigned interior. This interior has channels that cool the driver, plus additional channels routing air towards the visor to reduce the chance of visor fogging. The Sparco Air Pro RF-5W 1977 has removable, washable padding that can be repositioned for a comfortably personalized fit. All interior seams have been removed from areas where greater pressure is exerted on the head. The Air Pro RF-5W 1977 has been designed to accommodate a drink tube and an intercom system (both sold separately). Available in white with blue or red stripes, the Sparco Air Pro RF-5W 1977 has HANS posts pre-installed. Snell SA2020 and FIA 8859-2015 approved. Sparco Racing Helmets History of Innovation and Excellence Today's Sparco auto racing helmet line is the result of over 40 years of research and development experience, including wind tunnel testing. The new range was designed to meet the requirements of both Snell SA2020 and FIA 8859-2015 ratings. To meet these requirements Sparco introduced new innovations for driver safety and comfort. All auto racing shells now have layers of Carbon-Kevlar for greater strength. Sparco helmets have been wind-tunnel tested to maximize exterior vent placement and air flow. The EPS interiors and padding have also been redesigned for increased air flow and driver comfort. Sparco also introduced a new size: Medium/Large. This M/L size takes advantage of using the smaller helmet shell which is lighter and more compact. Sparco Air Pro RF-5W 1977 Auto Racing Helmet Details: Manufacturer: Sparco Manufacturer part no.: 003375 Snell SA2020 and FIA 8859-2015 approved Painted retro design in either red or blue Lightweight carbon-kevlar/fiberglass construction Pre-molded interior to accommodate accessories like drink tubes and an intercom system (accessories sold separately) New Medium/Large size uses lighter, more compact shell Anodized aluminum chin strap hardware Removable, washable lining Wind tunnel optimized venting with anti-fog air channels Additional Sparco RF-5W Pro helmet shields available here. Sparco Air Pro RF-5W 1977 Auto Racing Helmet Sizes: 54cm (X-Small)) 55-56cm (Small) 57-58cm (Medium)) 59cm (Medium/Large)) 60cm (Large)) 61cm (X-Large)) 62cm (XX-Large)) Proper Helmet Fitment and Head Measurement The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

Sparco Competition Driver Suit The Sparco Competition Driver Suit is the perfect balance of value and high-end features such as weight and comfort. The Competition is made from the latest generation of synthetic fire-proof fabrics which offer a soft light-weight outer and breathable inserts. The Competition features a unique elastic arm cuff not featured on any race suit. This unique cuff system allows the cuff to easily tuck into the glove gauntlet. The Competition also features pre-curved arms and legs, large rear stretch panel and a breathable inner thigh stretch panel for ultimate comfort. Technological Features of the Sparco Competition Driver Suit FIA 8856-2018 and SFI 3.2A/5 Approved Unique Arm Cuff System Pre-curved Arms and Legs Inner Thigh Stretch Panels Sparco Competition Driver Suit Size Chart

Sparco Competition Lady Driver Suit Finally! A women's Driver Suit that isn't only available in pink or light blue! The Sparco Competition "Lady" suit is an all-new lightweight three-layer suit specifically tailored for women. It offers superior fire protection, breathability and comfort. The Competition Lady is made from the latest generation fabrics which offer a soft lightweight outer fabric and breathable inserts at the sides and underarms. Large stretch panels and full floating sleeves for maximum comfort. It also features a light-weight zipper and collar, pre-curved arms full floating arm sleeves, hidden pockets, tone on tone stitching and the Sparco signature epaulettes. SPARCO COMPETITION WOMEN'S RACE SUIT TECHNOLOGY Tailored specifically for women Lightweight three-layer construction Full-floating sleeves Pre-Curved arms and legs Ultra-soft knit cuffs Light-weight zipper Multiple stretch panels for comfort SFI 3.2A/5 FIA 8856-2018 SPARCO COMPETITION WOMEN'S RACE SUIT SIZE CHART

Sparco Rev Racing Seat IDEAL FOR SMALLER COCKPITS The Sparco Rev is a light-weight competition seat is that offers performance, safety and styling. Evolved from the Evo seat, the Rev is designed for the smaller driver. Constructed with a special non-slip fabric in the shoulder and cushion, the Rev features silver harness slots and signature Sparco embroidery. The Sparco Rev is FIA approved. FEATURES Specifically designed for the smaller driver Ultra-light fiberglass composite shell Re-proportioned seat design provides excellent ergonomics Hans device compatible Fire retardant fabric Special non-slip fabric FIA approved DIMENSIONS

Sparco QRT-R Racing Seat The QRT-R is the first seat to feature Sparco’s patented QRT ultra-light technology. This QRT Technology gives an unparalleled mechanical strength/weight ratio for fiberglass composite racing seats. QRT Technology gives weight savings of 7 lbs to 10 lbs per shell. The main benefit is that QRT-R seat approaches the weight of a carbon fiber seat at a price of a fiberglass seat. The QRT-R is the lightest "Medium/Large" size fiberglass seat, the shell alone weighs only 9.9 lbs (or 15 lbs fully trimmed). The QRT-R has a unique CAD design that features a lower seating position that can fit a larger/taller driver with the exterior dimensions that can fit into smaller vehicles. The QRT-R is FIA approved. Availble in cloth. REQUIRES QRT SIDE MOUNT #600QRT FOR PROPER MOUNTING TECHNOLOGY Lightest "Medium/Large" size fiberglass seat on the market Lower seating position that can fit taller/larger drivers Smaller outer dimensions for small vehicle fitment QRT Technology gives an average weight savings of 7lbs per shell FIA approved DIMENSIONS

Sparco EVO QRT Racing Seats The EVO QRT competition seat has been redesigned with new improved updates. The EVO QRT is now made with all-new QRT Technology which results in an ultra-light shell. The EVO QRT has been updated from the previous EVO seat with a reduced shoulder bolster dimension that allows fitment into smaller cockpits but can still accommodate a medium size driver. Also the shoulder harness belt openings have been raised to accommodate a taller driver. The EVO QRT series of seats feature the most back angle rake of all Sparco seats for a very comfortable driving position. Available in cloth or vinyl. The EVO QRT is FIA approved. SIZING The Sparco EVO series is among the most versatile competition seats we carry, available in the following four sizes to ensure proper fitment: EVO S – Small (up to 32” waist) EVO – Medium (up to 34” waist) EVO L – Large (up to 36” waist) EVO XL – Extra Large (38” waist) WHAT IS QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength to weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. TECHNOLOGY QRT Ultralight fiberglass composite shell Excellent fitment into small cockpits 4 Sizes: Small through XL Excellent ergonomics Fire retardant fabric Special non-slip fabric FIA approved DIMENSIONS EVO S Dimesions: EVO Std Dimesions: EVO L / XL Dimesions:

Sparco Pro 2000 QRT Racing Seat The Pro 2000 QRT is an evolution of Sparco's iconic Pro 2000 seat. The Pro 2000 QRT has been upgraded with new ergonomics and technology. It is designed for a medium size driver with a waist size up to 34 inches. The Pro 2000 QRT is our deepest bolstered seat that gives excellent lateral support. It also features removable/adjustable lumbar cushions and non-slip fabric on the shoulder and bottom cushion areas for improved seat comfort. The Pro 2000 QRT is made with all-new QRT Technology which results in an ultra-light shell. The shoulder harness openings have been raised and the seat area around the mid-section has been reshaped for less interference when compared to the original Pro 2000. The Pro 2000 QRT is FIA approved. WHAT IS QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength-to-weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. TECHNOLOGY QRT ultra-light fiberglass composite shell Excellent fitment into small cockpits Adjustable lumbar cushions Excellent ergonomics Fire retardant fabric FIA approved DIMENSIONS

Sparco Grid Q Racing Seat The GRID Q was designed to provide the ultimate lateral support, racing ergonomics and safety. This unique design incorporates individual padding that is attached by Velcro. This padding design allows for ventilation channels. The GRID Q features a brand new shell design that has deep side bolsters and very supportive shoulder bolsters for excellent lateral hold. In addition to the unique padding and shell design, the Grid Q is now made with Sparco QRT Technology which results in an ultra-light shell. The side cushion can be removed to give more room for a larger fit. The Grid Q features harness slots that can accommodate a large range of drivers. The Grid Q is FIA approved QRT TECHNOLOGY QRT Technology gives an unparalleled mechanical strength/weight ratio for fiberglass composite racing seats. QRT Technology gives an average weight savings of 30% when compared to standard fiberglass technology. The main benefit is that QRT seats approach the weight of carbon fiber seat at the price of a fiberglass composite seat. FEATURES QRT Technology – 30% Weight savings Ultra-light fiberglass composite shell Harness slots that can accommodate a wide range of drivers Removable padding Hans device compatible Fire retardant fabric Special non-slip fabric DIMENSIONS

Sparco Air Pro RF-5W Auto Racing Helmet The current Sparco auto racing helmet line is a result of over 40 years of research and development experience, including wind tunnel testing and work with some of history's great racing teams. Sparco's latest Air Pro RF-5W helmet lineup was designed specifically to meet the requirements of the Snell SA2020 and FIA 8859-2015 ratings. Sparco has introduced several innovations for driver safety and comfort. All shells now have layers of carbon-kevlar for increased strength without added weight. The helmets have been wind-tunnel tested to optimize exterior vent placement and air flow. And new EPS interiors and padding were redesigned for increased airflow and driver comfort. Sparco also introduced a new Medium/Large helmet size taking advantage of their smaller, lighter, more compact shell. Check out Sparco Air Pro RF-5W helmet shields here. Sparco Air Pro RF-5W Auto Racing Helmet Details: Manufacturer: Sparco Manufacturer part no.: 003375 Snell SA2020 and FIA 8859-2015 approved Lightweight carbon-kevlar/fiberglass construction Wind tunnel optimized venting with anti-fog air channels New "Medium/Large" size uses lighter, more compact shell Anodized aluminum chin strap hardware Removable, washable lining Pre-molded interior accepts drink tubes and intercom system (sold separately) Sparco Air Pro RF-5W Helmet Colors & Sizes: 54cm (X-Small) to 62cm (XX-Large) Gloss White or Matte Black The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

Sparco MAX S2 Pro Electric Scooter The Most Fun You Can Have At The Track Outside Your Race Car You won't find a better, more fun way to get around the paddock at your next track event than on the Sparco MAX S2 Pro Electric Scooter. It goes up to 28 miles on a single charge, lasting even the most gregarious racer a whole weekend and then some. And, in Sport Mode, it can reach 20 mph so you can be sure to get to the lunch line before anyone else! When you get home from the track, hop on your MAX S2 to cruise through town with ease. With its rugged frame, powerful brakes, puncture-free tires, and front suspension, the Sparco MAX S2 Pro can take you just about anywhere! With its combination of style, performance, and reliability, the Sparco MAX S2 Pro Electric Scooter is a top choice for racers, urban commuters, and adventure enthusiasts alike. Sparco MAX S2 Pro Details: Manufacturer: Sparco Manufacturer Model Number: 099107PRO Storage: Quick folding system Charging capacity: 13 Ah Top Speed: up to 20 mph (32 kph) Range: 28 miles (45 km) Operating Modes: Eco, Normal and Sport Suspension: Double front suspension Brakes: Double braking system Lighting: Front/Rear Lights, Brake Light & Turn Signals Display: LED Display w/ App Connectivity Charge Time: 5 Hours Weight: 48lbs (22 kg)