Racing Restraints & Nets

The Formula 2x2: Your Go-To Belt for Formula Type Cars The Formula 2x2 features Frontal Head Restraint (FHR) specific 2” shoulder belts, 2" non-adjustable Formula lap belts, and individual non-adjustable sub straps. Individual Sub Straps Make the Formula 2x2 Different The sub straps loop through the lap belts and latch into the shoulder belts. The classic “D” ring used in previous Formula belts has been replaced with sewn-in webbing, creating a more lightweight and comfortable fit. The sub straps are typically anchored very far rearward, almost to the lap belt mounting points. This racing harness is typically used in single-seat open-wheeled cars with very reclined seating positions. It's not recommended for use in traditional road-racing sports cars or vehicles with more upright seating positions. Comes with wrapped snap-in attachments at all six points. Bolt-in attachments can be purchased separately. The Formula 2x2 is available in Black or Red. FEATURES: FHR/HANS specific 2” shoulder belts 2” Formula non-adjustable lap belts Individual non-adjustable sub straps Rotary cam lock FIA 8853-2016 approved

Schroth Profi II ASM 4 Point Harness (Anti-Sub) The Schroth Profi II ASM 4 Point Harness (Anti-Sub) integrates Schroth’s unique ASM (Anti-SubMarining) technology in a four-point system. The ideal harness for stock seats, or seats not designed for a pass-through for a sub strap, that are used in Driver Education programs. Schroth’s ASM is an extra fold of material sewn into the inboard shoulder belt, elongating at a separate rate compared to the outboard belt. This allows two movements: the upper torso can twist slightly, and on the rebound phase, the torso is planted firmly back in the seat instead of sliding under the lap belt. The Schroth Profi II ASM 4 Point Harness is good for use with a HANS device or other Head and Neck Restraint (HNR). The ASM shoulder strap on the ASM is 3” width, which will work with any HNR. A dual or single strap can be added to convert this belt into a 5- or 6- point system. The shoulders are ready to wrap around a roll bar, and snap-in or bolt-in attachments can be purchased. The Schroth Profi II ASM 4 Point Harness also features a “Flex Belt.” Instead of being sewn into the harness, the cam latches and end fittings are wrapped, making configuration changes from a Pull-Up to a Pull-Down configuration quick and easy. In addition to helping you customize the use of your device for your particular situation, you can add bolt-in brackets to be wrapped in the lap belts. Snap-in brackets are standard on the lap belts. Choose from Black, Blue, or Red! Be sure to specify Driver or Passenger side as the construction is slightly different for each. See Schroth Harness Installation Checklist Here

The Safe, Street Legal 4 Point Harness The Profi II ASM FE is essentially the same as the Profi II ASM, except it features a Push-Button cam lock. The red push button that says "Press" is necessary to retain street legality and so an EMT who shows up at an accident scene will know how to release your restraint. The FE version also features sewn in, bendable bolt-in tabs for the lap belt attachments, for use in applications where space is limited. It's designed to be used as a four point system, perfect for use in Driver Education cars or any other application where stock seats are retained. (A seat that was not originally designed for a sub strap should never be modified to accept one.) The Profi II ASM incorporates Schroth's legendary ASM (Anti Sub Marining) technology that is the only thing like it on the market. ASM is an extra fold of material sewn into the right shoulder belt that elongates at a different rate than the outboard belt. This allows your upper torso to twist slightly. On the rebound phase, your torso is planted firmly back in the seat rather than allowed to slide under the lap belt. You can add a single or dual sub strap to make this belt into a 5 point or 6 point at any time. Schroth tested this harness with a HANS device and the results were great. You can use a 4 point ASM Harness with any HANS device. The lap belts provided with this harness are only available with bolt-in hardware (it's sewn in) as they are most commonly needed in setups requiring street legality. If you need a different setup, please call (844) 438-7244. The shoulder straps come with wrapped-in B23C bolt-in brackets that can be easily removed to wrap around a roll bar or harness bar. See the Schroth Harness Installation Checklist here.

Schroth Clubman 2x2 6 Point Racing Harness Schroth's Clubman has one aim: to provide a superior harness for people needing a lower-cost belt. The Clubman features Frontal Head Restraint (FHR) specific 2” shoulder belts, 2" Clubman pull up lap belts, and a T-bar non adjustable sub strap. Shoulders and sub strap hardware is wrapped in. The FHR specific shoulder belts are designed to make FHR use safer and more comfortable. The full 2" shoulder webbing fits perfecting on a FHR device, creating optimal force distribution on the surface of the device. ADJUSTERS AND OPTIONS The adjusters on the Clubman belt are heavier and not as easy to use. They are, however, cheaper and bring down the overall cost of the harness. In addition the sub strap does not have adjusters and the lap hardware is not interchangeable. Only available with snap-in, pull-up lap belts. Laps are not reversible like they are on the Flexi 2x2. FEATURES: 2” shoulder belts 2” Profi pull-up lap belts with sewn-in snap-in hardware T-bar sub non-adjustable strap Rotary cam lock

Safecraft Restraint Systems Quick Release Kevlar Head Net *Picture shown with optional strap adapter. The Safecraft Restraint Systems Quick-Release Kevlar Head Net adds driver security to your roll cage, preventing ejection in the event of a crash and helping keep the driver's head from impacting the roll cage (depending on orientation to the driver). The push-button quick release gets the net out of the way immediately for emergency egress or driver changes. Safecraft is a premium brand of racing safety equipment, run by racers with products designed and handcrafted in the USA by skilled craftsman. Some sanctioning organizations require a window net system for competition. FEATURES: Choose SFI 37.1 or FIA 8863/2013 certification (+$45 for FIA) Kevlar webbing Choose Left or Right side Measures: 15" tall (tallest vertical strap) by 26" long (tip to back of web), three 29" attachment straps Includes net and quick-release hardware Standard netting color is black

Safecraft Restraint Systems Kevlar Racing Net This Safecraft Restraint Systems Kevlar Racing Net will change the way you look at racing nets. It installs easily and has the most sophisticated and easily-adjustable ratchet-latch tension adjustment you'll ever use. Specify installation as Left or Center/Right of driver, and SFI or FIA certification. Some sanctioning organizations require a window net system for competition. FEATURES: Available with SFI 37.1 or FIA 8863/2013 certification (+$40 for FIA). Kevlar webbing. Measures 15" tall (on tallest vertical strap) by 26" long (from point to back of web), with three 28"-31" long straps to attach the net in the back. Includes racing net and ratchet-latch tensioner. Standard webbing color is Black.

CMS Performance Sub Strap Mount for Porsche Lightweight Carbon Bucket Seats This Product Fits the Following Cars: 992 GT3/GT3RS 991.1 & 991.2 GT3/GT3RS 992 GT3/GT3RS 991.2 GT2RS 981 Cayman GT4 718 Cayman GT4 718 Cayman GT4RS The Best Way to Install Sub Straps in your Porsche The CMS Performance Sub Strap Mount is a must-have for Porsche GT2RS, GT3/GT3RS, and GT4 owners using five-, six-, or seven-point harnesses with the factory CFRP Full Bucket Seats (also called Lighweight Bucket Seats). Designed to easily bolt in using existing seat hardware without having to fully remove the seats from the car, the CMS Performance Sub Strap Mount properly anchors your harness anti-submarine straps ("sub straps") to your seat base. The CMS Performance Sub Strap Mount fits either driver- or passenger-side seats. CMS Performance Sub Strap Mounts are designed, manufactured, and powder-coated entirely in-house in the USA. Made of solid carbon steel while only weighing 1.4 lbs (625g), there's not a stronger, more affordable solution available. CMS Sub Strap Mounts allow full seat adjustment, fore/aft and up/down, while maintaining the ideal sub strap angle to your body for maximum safety. CMS Performance Sub Strap Mount Details: Solid steel construction for maximum safety Allows full fore/aft and up/down seat adjustment Powder-coated to match OEM seat base Fits driver or passenger seat (Porsche LWB only) Simple to install Compatible with OEM seat belt and airbag hardware

CMS Performance Sub Strap + Lap Belt Mount for BMW This Mount Fits All Sub-Models of the Following Cars: BMW F87 M2 (2016-2021) BMW G87 M2 (2023) BMW F82/83 M4 (2014-2020) BMW G82/83 M4 (2021+) BMW E89 Z4 (2009-2016) BNMW G89 Z4 (2018+) The Best Way to Mount Harness Lap and Sub Belts in Your BMW M2, M4, or Z4 The CMS Performance Sub Strap + Lap Belt Mount is designed to be installed and used with your factory BMW seats, giving you strong, secure mounting points for your racing harness lap- and sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original BMW mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap + Lap Belt Mount provides an extremely strong structure to which you can clip or bolt your harness lap belts and wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap + Lap Belt Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap + Lap Belt Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap + Lap Belt Mount for BMW Details: Manufacturer: CMS Performance Manufacturer part no.: CMS-SL-001 Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

CMS Performance Sub Strap + Lap Belt Mount for GT350/GT350R/S550 This Mount Fits All Variants of the Following Cars: Ford Performance Shelby GT350 (2015-2020) Ford Performance Shelby GT350R (2016-2020) Ford Performance Shelby GT500 (2021+) Ford S550 Mustang GT (2015-2023) The Best Way to Mount Harness Lap and Sub Belts in Your Shelby Mustang The CMS Performance Sub Strap + Lap Belt Mount is designed to be installed and used with your factory Ford Performance seats, giving you strong, secure mounting points for racing harness lap- and sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original Ford mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap + Lap Belt Mount provides an extremely strong structure to which you can clip or bolt your harness lap belts and wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap + Lap Belt Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap + Lap Belt Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap + Lap Belt Mount Details: Manufacturer: CMS Performance Manufacturer part no.: CMS-SL-003 Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

CMS Performance Sub Strap + Lap Belt Mount for Toyota GR Supra/GR86 This Mount Fits All Variants of the Following Cars: Toyota GR Supra A90/A91 (2019+) Toyota GR86 (2021+) The Best Way to Mount Harness Lap and Sub Belts in Your GR Supra or GR86 The CMS Performance Sub Strap + Lap Belt Mount is designed to be installed and used with your factory Toyota seats, giving you strong, secure mounting points for racing harness lap- and sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original seat mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap + Lap Belt Mount provides an extremely strong structure to which you can clip or bolt your harness lap belts and wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap + Lap Belt Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap + Lap Belt Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap + Lap Belt Mount Details: Manufacturer: CMS Performance Manufacturer part no.: CMS-SL-005 Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

Schroth Window Nets Have your own window net hardware, or replacing an expired window net? Schroth has you covered! Here you'll find the same great window net, without any of the additional hardware. Meets SFI 27.1 and FIA J253.11

Schroth Tuning Harness Pads Sometimes people who wear harnesses for long periods of time complain of irritation of the skin on their shoulders and neck where the harnesses pass over. If that is the case, you need a set of these harness pads to provide a soft cushion between the webbing and your skin. Other people use them as stylish comfort add-ons to their factory 3-Point restraints. Made of high quality polyester, these pads can be washed, and can be installed/removed in seconds. They come in a wide variety of colors, including Black Leather. One set required per harness. These items have the new style Schroth Racing patch sewn onto them instead of the standard fuzzy lettering. Sold in Pairs.

Sparco Arm Restraints Most racing organizations require arm restraint systems for open-wheel competition. These Sparco Arm Restraints come in three colors and have padded arm bands for additional comfort. FEATURES Great for open-wheel cars Padded arm bands and steel hardware D-ring system allows you to adjust the arm band circumference for a comfortable fit Easy release allows quick entry and exit from driver's compartment Available in black, red or blue Meets SFI 3.3

Sparco 4 Point Racing Harness (3" Steel) Strap In and Level Up Your Ride with the Sparco 4 Point Racing Harness! The Sparco 4 Point Racing Harness is here to redefine your driving experience, turning every ride into a secure, race-ready adventure. And no, we're not just pulling your leg... or should we say, your lap belt?Why the Sparco Harness is the Co-Pilot You Didn't Know You Needed:Unity in Safety: Designed to work in perfect harmony with Sparco's competition seats, this harness doesn't just keep you in place; it becomes one with your racing setup. It's like finding the peanut butter to your jelly.Quality that Speaks Volumes: Crafted from top-notch fabric and boasting durable fasteners, this harness ensures that once you're strapped in, you're in for a secure and comfy ride. No more wiggling around trying to find that sweet spot!A Perfect Fit: With 2-inch lap and 3-inch shoulder straps, this 4-point masterpiece offers a snug embrace. And thanks to the aircraft-quality quick-release buckle with integrated anti-submarine belts, getting in and out is a breeze—no advanced engineering degree required.Smooth Operator: The lightweight steel adjusters are like butter, making tensioning smooth and clamping just perfect. Because who has time for complicated adjustments when the track is calling?Snap to It: Each belt comes with snap-on fixings, making installation a snap (pun intended). And since they're FIA approved, you can hit the track with confidence, knowing you're as safe as can be.Tech Specs to Impress:Lap of Luxury: 2" lap belts for that just-right fit.Shoulder the Load: 3" shoulder straps to keep you snug without the hug-too-tight feel.Pull for Power: Pull-up lap belts for on-the-fly adjustments.Smooth Moves: Lightweight steel adjusters for that seamless tensioning.Snap Happy: Snap-in Kit Mounting included because who doesn't love convenience?Seal of Approval: FIA Approved, because your safety is non-negotiable.Imagine hitting those corners with the confidence of a pro, strapped in securely, focused on the finish line, not on your seatbelt. That's what the Sparco 4 Point Racing Harness brings to the table—or should we say, to the driver's seat.Grab your Sparco 4 Point Racing Harness now and transform every drive into a track-worthy triumph! Sparco’s full line of harnesses works in unity with our competition seats. Crafted from high-quality fabric and fitted with durable fasteners, each harness restrains the body for added safety and protection. The 4-point harness features 2-inch lap and 3-inch shoulder straps that attach in the center using an aircraft-quality quick-release buckle with integrated anti-submarine belts. The lightweight steel adjusters allow for smooth, quick adjustments and perfect clamping. Each belt attaches to the frame using snap-on fixings. Available in pull up only. TECHNOLOGY 2" lap and 3" shoulder straps Pull-Up lap belts Light-weight steel adjuster for smooth and quick tensioning Snap-in Kit Mounting included FIA Approved

Bolt-In Window Net Kit with Schroth Net Our Bolt-In Window Net Kit includes a Schroth ribbon net and is designed to make window net installation fast and easy using normal hand tools. Available in two sizes, the small is 16.5" wide that is perfect for Spec Miata and Honda S2000's while the large 20" wide version fits BMW Spec E46, Trans-Am TA2 and other larger door openings. Installation parts include both weld and clamp on options, with all required hardware included. The Window Net Hardware Kit was designed to revolutionizes window net installation, while also incorporating an easy to operate design. Available in both small and large sizes, this Hardware Kit can be purchased as a stand-alone item, or a complete kit with Schroth Racing Window Net. Drivers wishing to use their own net will be pleased to learn this kit can be used with many competitors’ nets, including TEAMTECH window nets.  Small kits are designed to work with window nets up to 16.5" wide, and the large kits are work with most 20" wide nets.  Installation methods include both weld and clamp on options, with the required hardware included for each application. With both versions of the hardware kit, the upper bar is secured to the cage using mounting tabs which can be welded or clamped. Using a spring-loaded mechanism, the upper bar easily slides in and out of the tab. The two kits differ based on how the lower bar attaches the vehicle. Bolt-in Window Net Kit GT Version The GT version secures the lower bar to the roll cage using 1-meter-long nylon mounting straps. The adjustability of the nylon straps creates the most versatile mounting solution, perfect for road and GT cars. Included in the Bolt-in Window Net Kit:  (1) - Long Mounting Tab (1) - Short Mounting tab (4) - Mounting band clamps (2) - Collar Clamps (1) - Clamp Handle w/#6-32x38 screw (1) - Spring Loaded bar (Upper) (1) - Lower Bar (2) - 1 Meter long Mounting Strap (1” wide) (4) - 3 bar side (1” wide) Upper Mount BarThe upper bar is secured to the cage using your choice of the included clamp-on bracket or welded tabs. The round upper bar uses a spring-loaded mechanism that fits perfectly between the two mount brackets to provide an easy to install net kit that keeps debris out and hands and arms in. Lower Mount BarTo secure the bottom bar and adjust window net tension, two nylon mounting straps with adjustable lock bars connect the bottom round bar to your roll cage.