Pagid
Pagid Racing Brake Pads No. 2180
$343.65
Pagid Front brake pad; RS 29 compound; 17.2mm; fits BMW Z3 (not Roadster) ‘95-’03, Z4 ’03-now, 318is-325i [E36] ‘90-2998, 3’i-323i [E46] ’98-’03
RSL 29:
The PAGID RSL29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear.
FluidLogic
FluidLogic 360 Helmet Side Kit
$149.95
FluidLogic 360 Helmet Side Kit
Everything needed to completely set up any helmet to connect with the FluidLogic Flush 360 System
Includes:
Helmet Side Flush 360
Aquacom Pro (smaller mic size)
Aquacom Baja (larger mic size)
4mm tubing
FluidLogic
FluidLogic Coaxial Helmet Side Kit
$149.95
FluidLogic Coaxial Helmet Side Kit
Everything needed to completely set up any forced air helmet to connect with the FluidLogic Coaxial System.
Includes:
Coaxial Helmet Side Maglock
Aquacom Pro (smaller mic size)
Aquacom Baja (larger mic size)
4mm tubing
FluidLogic
FluidLogic Flush 360 System (Non Forced Air)
$1,099.95
FluidLogic Flush 360 System (Non Forced Air)
The Pod & Flush 360 Kit is designed for users that do not use forced air or simply chose not to build onto their existing forced air system. The kit comes with the Pod as described above along with the Flush 360 assembly to allow the user to quickly connect/disconnect their hydration using the power of Maglock®.
The Flush 360 quickly and easily installs onto the helmet in minutes with no drilling or modifications required. The Flush 360 Kit comes with everything needed to connect the existing fluid source to set up one complete helmet and seat in the vehicle.
FluidLogic
FluidLogic Coaxial System (Forced Air)
$1,199.95
FluidLogic Coaxial System (Forced Air)
Forced-Air applications use our Maglock® Coaxial connector to provide air and water quickly and easily.
The Pod & Coaxial kit is designed for users that have a pre-existing forced air setup for their vehicle and helmet. The Pod is the heart and brain of the Fluidlogic™ system that also connects to your IOS device via Bluetooth to allow the user to fully customize their hydration profile. Included with the Pod is the Microbutton used to visually communicate with the user and command the Fluidlogic™ system with the press of a button. All the necessary mounting, wiring and plumbing hardware is included to turn the existing fluid source into a smart hydration system with no helmet drilling or modifications.
The Fluidlogic™ Pod paired with the Coaxial system allows forced air users to connect both air and water within the same Maglock® magnetic connection. The Coaxial kit includes everything needed to completely set up one helmet and one seat in the vehicle.
FluidLogic
Maglock Air Hose
from $31.80
Maglock Air Hose
**Maglock Air hose side NOT included**
Maglock Air Hose is built to our exact specifications to ensure that you get the lightest, most flexible hose on the market today. The feedback from our test pilots ensures you that neck fatigue during use is greatly reduced, furthermore, this hose does not leverage or disconnect the Maglock Air in high G or high impact environments. Used by top motorsports athletes including all Andretti Indy cars, Ricky Stenhouse Jr. (NASCAR), Ricky Johnson (TT), and Guy Cosmo (IMSA). We highly recommend our hose to be paired with Maglock Air.
Alpinestars
Alpinestars SuperMono v2 Racing Shoes
$499.95
Alpinestars SuperMono v2 Racing Shoes
The Alpinestars SuperMono v2 has been designed and engineered to give drivers the ultimate in performance fit and feel. The SuperMono v2 is an ultra-lightweight racing shoe constructed using premium materials with every component reduced in order to save weight. Featuring a new "sock" construction designed to deliver a more sock-like fit, this shoe has a more contoured, sculpted shape to better adapt to the lines of the feet. The SuperMono v2 features a minimal, fuss free construction for maximum lightness, with strategically placed perforated zones for exceptional ventilation.
The elastic fireproof "sock" and tongue combines lightweight technology and unsurpassed levels of comfort, for enhanced general performance and an optimized fit. Additional hidden instep fit adjustment for a precise, secure and comfortable fit. Strategically-positioned perforation zones on the lateral and medial sides and the front toe for collar for optimized ventilation, breathability and comfort. Main closure made by hook and loop for ease of use. Lightweight micro-porous padding around the heel and insole entrance for enhanced comfort while driving. Collar padding constructed from nitrile rubber for comfort and light weight. Insole in Texon and micro-porous material on the upper for comfort and light weight. Micro-porous heel for additional shock absorbing and light weight.
CONSTRUCTION
Main upper constructed from bovine leather for exceptional comfort and durability
Elastic collar features silicon printing for durability
Front and rear pull tabs for easy entry and a precise fit
Perforated inner gusset padding for improved comfort and breathability
Lightweight micro-porous padding around the heel and footbed for enhanced driver comfort
All graphic detailing on the leather uses transfer technology for weight saving
Lace Lock system ensures the shoe fits comfortably and securely
Para-aramidic tubular lining for excellent heat-resistance, weight saving, and strength
PROTECTION
Complies with SFI 3.3/5 homologation standards
Sabelt
Sabelt Porsche GT3/GT4 4 Point Harness
$429.00
Sabelt Porsche GT3/GT4 4 Point Harness
Built specifically for the Porsche GT2 and GT3, these four-point racing harnesses provide all the safety and security you've come to expect from Sabelt in a package that makes adding safety to your Porsche extremely fast and easy. The harness is easily adjusted using the bright yellow tabs that pull down, making securing and releasing your harness simpler than ever.
A number of other handy features have been added, including communication/hydration routing on top of shoulder straps and silicone grip on the underside to keep your head-and-neck restraint device securely in place while on the track.Sabelt is an industry leading manufacturer of motorsport harnesses and accessories, for good reason.
FEATURES:
NOT FIA or SFI CERTIFIED
Easily adjusted using the yellow pull-down straps.
Velcro patches on shoulder straps for securing loose ends.
Communication/hydration routing on shoulder belts keep lines secure and out of the way.
Alpinestars
Alpinestars Tech-1 KX v2 Karting Shoes
$189.95
Alpinestars Tech-1 KX v2 Karting Shoes
Bringing Formula 1 derived features, along with specific innovations for the kart track, the new Tech-1 KX V2 is now lighter and more breathable with a revised asymmetric lacing system to conform more closely to the foot. The use of thin PU film adds durability whilst reducing seam construction and pressure points. Laser cut-outs and perforations in the film, combined with 3D mesh, offer maximum breathability
Construction and Features
Advanced seamless thermo-welded construction consists of ultra-thin PU film and 3D mesh to provide supremely lightweight performance and excellent comfort and fit.
Sleek shoe profile conforms to the anatomy of the foot and ensures great fit and performance.
Laser-cut air-intakes and perforations on upper, with 3D mesh on tongue offer excellent breathability and comfort.
External heel, ankle and internal toe reinforcements for abrasion resistance and protection.
Dual asymmetric closure system incorporates adjustable hook-and-loop ultra-thin strap plus aramidic speed top lacing with Alpinestars’ exclusive wire closure system. The system strategically envelopes the foot for optimal support and offers precise fit and secure closure.
New superlight tongue construction combining micro suede and 3D mesh, provides excellent breathability and superior comfort.
Collar padding constructed from PU foam for comfort and weight-savings.
Soft microfiber collar is cut lower at the rear to give greater Achilles’ heel comfort and improved range of movement.
Lightweight, one-piece heel and insole construction for enhanced heel lockdown and comfort whilst driving.
Alpinestars exclusive thin rubber compound outsole, derived from Formula 1’s Race Program, delivers unsurpassed levels of feel and sensitivity with the pedals, while the textured pattern ensures optimum levels of grip.
Bell
Bell GT6 RD Carbon 4C/EC SA2020 Helmet
$1,599.95
Bell GT6 RD Carbon: Factory Comms & Drink Tube Installed
Derived from iconic Bell HP6, the Bell GT6 RD Carbon features the same modern and aggressive design developed for racers in closed-car environments, featuring a wide eye port for extended vision with an ultra-lightweight Premium carbon shell. Its ventilation slots can be connected to various types of air intakes for external cooling systems. The GT6 RD is fitted with a fully-integrated radio communication kit, including a front-mounted microphone and ear cup speakers providing excellent sound along with insulation from external noise. The kit includes a wired four-pin male IMSA radio connector.
Bell GT6 RD Carbon Fiber Helmet Details:
Manufacturer: Bell Helmets
Manufacturer part number: 123912
Construction: Ultra-light premium carbon-composite shell
Homologation: FIA 8859-2015 and Snell SA2020
Factory installed HANS anchors: yes
Interior: dark grey high-strength, high-comfort FR fabric
Color: carbon, gloss finish
Sizes: 6 3/4 (54cm) to 7 5/8+ (61cm+)
Bell GT6 RD Carbon Fiber Helmet Additional Features:
Factory-installed communication system with microphone and ear cups (IMSA connector)
Factory-installed drink tube
Wide eye port for better vision in closed cockpit cars
Advanced multi-density, multi-piece liner maximizes energy absorption and impact performance
Integrated channels for optional drink tube (not included)
Extraction vents maximize cooling air ventilation
Optional top- and side-air intakes available for use with external cooling system
Ear cups increase noise insulation
What's In The Bell GT6 RD Carbon Box:
GT6 Carbon Fiber helmet
Installed communications
Hans anchors
Clear Bell SE06 3mm DSAF shield
Draw-string helmet bag
Plastic tear-off posts installed
Hex wrench key
Drink tube system (shown in photos for illustrative purposes) is not included.
Alpinestars
Alpinestars Tech-1 KZ v2 Kart Racing Shoes
$299.95
Alpinestars Tech-1 KZ v2 Karting Shoes
Light, fast and extremely comfortable. The TECH-1 KZ V2 shoe uses state of the art flat knitting technology for a fully knitted upper construction that adapts perfectly to your feet. PU film and padded reinforcements provide the support and protection required while the dual ankle strap closure and instep lacing adjustment keep them perfectly in place.
Construction and Features
Advanced seamless thermo-welded construction consists of ultra-thin PU film and textile to provide supremely lightweight performance and excellent comfort and fit.
Elastic top collar and instep zone made in knitted upper textile.
Sleek shoe profile conforms to the anatomy of the foot and ensures great fit and performance.
Dual strap closure hook and loop in the instep and top collar area enhanced to create a perfect and secure fit.
Additional (NOT VISIBILE) instep fit adjustment for providing a perfect fit closure.
Lateral side made in textile material to provide breathability, plus 3D print square graphics that enhance the protection and structure.
Internal toe reinforcement for abrasion resistance and protection.
Laser cut outs on the toe and medial side for added breathability.
Collar padding constructed from PU foam for comfort and weight-savings.
Lightweight one-piece heel and insole construction for enhanced heel lockdown and comfort whilst driving.
Alpinestars exclusive thin rubber compound outsole, derived from Formula 1’s Race Program, delivers unsurpassed levels of feel and sensitivity with the pedals, while the textured pattern ensures optimum levels of grip.
Alpinestars
Alpinestars Tech-1 ZX v3 Nomex Gloves
$229.95
Alpinestars Tech-1 ZX v3 Nomex Gloves
Alpinestars is always looking for new ways to improve driver safety and increase protection. The new generation of ZX auto gloves provides nearly a 20% improvement in heat transmission via the new honeycomb NOMEX top layer. This has been achieved while still offering the exceptional combination of fit, feel and grip for which our gloves are known. Developed with leading drivers in F1 and Endurance, with a new dual-sided honeycomb two-layer fabric, the Tech-1 ZX v3 Gloves offer exceptional protection while significantly improving breathability. The new 3D silicon print palm provides excellent levels of grip from a reduced print surface, giving more feel. The glove’s pre-curve shape has been increased from the previous version, resulting in better fit and less material bunching when holding the wheel.
Construction and Features
Advanced, breathable, and flame-resistant honeycomb, aramidic fiber main assembly with bonded aramidic lining to ensure for optimal temperature control and maximum comfort and feel.
External seams provide superior comfort and prevent any excessive pressure points from forming on the hands while driving.
Pre-curved fingers and palm help improve fit and reduce fatigue while driving.
Outer grip zones for superb control and feel on the cockpit’s controls.
Ergonomically designed 3D grip technology on palm and fingers with strategically positioned silicon surface patterning for improved flexibility and control.
Touchscreen compatible thumb and second fingertip.
Certified to FIA 8856-2018 homologation standard
Alpinestars
Alpinestars Tech-1 Race v3 Nomex Gloves
$159.95
Alpinestars Tech-1 Race v3 Nomex Gloves
Brand new for 2023, Alpinestars continues to lead the market in design and technology. Offering increased levels of protection from the previous generation, the new Tech-1 Race v3 Glove has many features and benefits of a higher price point glove, such as pre-curved fingers and external palm seams to reduce pressure points.The new Alpinestars Tech-1 Race v3 racing glove has been designed to offer exceptional levels of feel, comfort and performance in an affordable glove. It features inside-stitched seams on all five fingers for superb comfort and durability.
Equipped with Alpinestars' open cuff design, the 180° elasticated wrist makes for easy entry in the pits and a secure fit in the car. Additional premium design touches include a silicon surface for improved flexibility and control, and pre-curved fingers to reduce fatigue while driving to maximize performance.
CONSTRUCTION
Flame resistant aramidic fiber main construction is bonded for optimum performance, comfort, and safety.
Combination of innovative materials and construction methods resuls in a significant weight reduction.
Full-gauntlet single panel top construction for maximum coverage.
Extended silicon printing on fingers and palm for improved grip and feel.
Pre-curved fingers and palm help reduce fatigue while driving.
PROTECTION
Certified to the latest FIA 8856-2018 homologation standard.
Extended cuff length in accordance with new FIA standards for maximum protection against fire and heat.
KEY FEATURES
Minimal-seam construction for enhanced comfort, feel, and weight-savings.
Alpinestars cuff opening design with a 180° elasticated wrist for easy entry/exit and a secure fit.
External super-lightweight printed design details for reduced weight.
Alpinestars
Alpinestars Tech-1 Start v3 Nomex Gloves
$119.95
Alpinestars Tech-1 Start v3 Nomex Gloves
Designed with a single upper panel and innovative finger construction, the Tech-1 Start v3 Gloves have been engineered to reduce the excess material in the fingers, as well as the total weight of the glove.
Construction and Features
Box cut fingertip construction offers a seamless no-fourchettes design on the ring and middle fingers, resulting in a glove which is anatomically optimized for a confined cockpit.
Ergonomically positioned silicon printed zones on palm for enhanced grip.
Close-fitting, straight, extended with elasticated wrist for easy entry and a secure fit.
Certified to FIA 8856-2018 homologation standard
Alpinestars
Alpinestars Tech-1 KX v3 Karting Gloves
$99.95
Alpinestars Tech-1 KX v3 Karting Gloves
The Tech-1 KX v3 Glove is a premium karting glove, designed to deliver high levels of performance and featuring external seams for superior comfort and to prevent any pressure points forming on the hands while driving. Other neat design touches include a synthetic suede leather palm with a camo print and silicon surface for improved flexibility and grip, and a touch compatible print on thumb and index fingers for using mobile devices while at the track.
Construction and Features
Two-layer stretch nylon-cotton main assembly construction provides the optimal combination of comfort and feel.
Technical construction methods result in significant weight reduction.
New breathable mesh construction on the finger sidewalls to enhance breathability and reduce sweating.
External seams offer high level of performance, superior comfort and prevent any excessive pressure points on the fingers while driving.
Pre-curved finger and innovative palm design aids fit while reducing material bunching.
Ergonomically designed grip print on palm and fingers with strategically positioned silicon surface patterning for improved flexibility, grip, and control.
Touchscreen compatible thumb and second fingertip.
Alpinestars cuff opening with a 180° elasticated wrist for easy entry and secure fit.
Alpinestars
Alpinestars Tech-1 K Race v2 Corporate Karting Gloves
$49.95
Alpinestars Tech-1 K Race v2 Corporate Karting Gloves
This lightweight karting glove features a new construction of polyester bonded with polymesh to offer superb levels of durability, comfort, fit and feel, and has internal seams and synthetic suede leather on the palm to allow for excellent levels of comfort, feel and grip.
There are also mesh fourchettes on half of the fingers and lycra on the other half for the perfect blend of ventilation, flexibility and comfort, with a silicon surface treatment on the palm and fingers for improved flexibility and control. It is also equipped Alpinestars open cuff design with a 180° elasticated wrist for easy entry and a secure fit, and a touch compatible print on thumb and index fingers for using mobile devices while at the track.
CONSTRUCTION
Lightweight, polyester-mesh provides optimum feel and enhanced comfort in warm weather.
New ergonomically designed silicone print on palm areas for improved mobility and grip.
Synthetic suede material on palm for enhanced durability.
KEY FEATURES
Touchscreen compatible fingertips.
Mesh and lycra fourchettes promote comfort, airflow and durability.
Pre-curved finger and palm aids fit while reducing material bunching.
Gauntlet cuff incorporates a 180° elasticated wrist for easy entry and a secure fit.
Digital print on surface for an aggressive aesthetic.
Sign Up and Save
Subscribe to our eNewsletter to learn about events near you, great deals, new products and for tips to improve your creator skills.
