
Chillout Systems
Chillout Systems Dual Voltage AC Power Supply
$160.00
Chillout Systems Dual Voltage AC Power Supply
Shock-resistant external AC power supply enables cooling outside of your vehicle. This power adapter plugs into the wall and supports 110-220 volts.

FluidLogic
FluidLogic 360 Helmet Side Kit
$149.95
FluidLogic 360 Helmet Side Kit
Everything needed to completely set up any helmet to connect with the FluidLogic Flush 360 System
Includes:
Helmet Side Flush 360
Aquacom Pro (smaller mic size)
Aquacom Baja (larger mic size)
4mm tubing

FluidLogic
FluidLogic Coaxial Helmet Side Kit
$149.95
FluidLogic Coaxial Helmet Side Kit
Everything needed to completely set up any forced air helmet to connect with the FluidLogic Coaxial System.
Includes:
Coaxial Helmet Side Maglock
Aquacom Pro (smaller mic size)
Aquacom Baja (larger mic size)
4mm tubing

Chillout Systems
Chillout Systems Insulated Coolant Hose
from $140.00
Chillout Systems Insulated Coolant Hose
The Chillout Hose is insulated liquid-transfer tubes encased in an ultra-durable, tear-resistant fabric shield.
Six to ten feet of hose that connects your cooling garment to the driver cooling unit with ¼” fittings for a consistent flow cycle.
Hose too long for your set-up? Solution: cut hose to desired length. Our hoses comes with an extra supply of matching shrink wrap for a flawless, durable, clean look.
FEATURES:
The 10-Foot hose includes additional heat shrink tubing for custom sizing while maintaining a finished look.
Male connectors, two pieces.
Female dual-prong connector to connect cooler, one piece
Can be connected to other hoses to extend length (including Y connector).
Double-Layer Insulation: one layer to protect the hose, a second to keep your coolant cool and efficient.

Chillout Systems
Chillout Systems 4" Carbon Fiber NACA Duct
$140.00
Chillout Systems 4" Carbon Fiber NACA Duct
Ultralight weight and wind tunnel tested, the Chillout 4-inch NACA duct provides over 55% more airflow than a standard 3-inch NACA duct. Used in conjunction with 4-inch Neoprene Air Duct Hose and a 4-inch Chillout Carbon Fiber Plenum (both available in the drop downs above), the Chillout Carbon Fiber NACA Duct results in maximum cooling efficiency for your cooling system.NACA ducts bring air into a vehicle with a minimal increase in external drag. The purpose of a NACA duct is to increase the flow rate of air while not disturbing boundary layer airflow over your vehicle's exterior. When the cross-sectional flow area of the duct is increased, you decrease the static pressure and make the duct into a vacuum cleaner (without the drag effects of a standard scoop). The reason why the duct is narrow, then suddenly widens in a graceful arc is to increase the cross-sectional area slowly so that airflow doesn’t separate and cause turbulence and drag.
FEATURES:
Dry carbon fiber for light weight and durability.
Wind tunnel tested.
55% more airflow than 3" NACA duct.
Chillout Cooler sold separately.

Chillout Systems
ChillOut Systems Rapid Release Kit for Cooling Shirt
$140.00
ChillOut Systems Rapid Release Kit for Cooling Shirt
The Rapid Release dry break system makes driver changes fast and effortless. No fumbling with tubes or connectors while under pressure, just a quick press and coolant/water starts flowing instantly. In an emergency, the connectors release when a force greater than 10 lbs is applied.The kit comes with two style car mounts, a roll bar mount and a flat surface mount which connects to the cooling system. Also included is a driver-side handle that quickly connects your shirt or balaclava to the car mount already fixed in the car.The car mounts can be fitted to the roll bar with the roll bar mount whereas the flat mount can be mounted in various places like the transmission tunnel, seat, etc via the flat-mount.
ChillOut Systems Rapid Release Kit for Cooling Shirt Details:
Manufacturer: ChillOut Systems
Manufacturer Part Number: CO-RRKS
Material: Lightweight composite
Cooling hose side or shirt side: Both sides included
ChillOut Systems Rapid Release Kit for Cooling Shirt Components:
2 x 1/4" barbed quick release fittings
1 x flat surface mount
1 x roll-bar mount
1 x driver side handle
2 x 36" reinforced, non-kinking extensions
2 x 1/4th to 5/16th barrel connectors
2 x 1/4th to 1/4th barrel connectors
With the simplest of designs that works every time, a quick press and the Chillout coolant formula starts flowing instantly. To disconnect or in an emergency, the ChillOut Systems rapid release handle kit for cooling shirts automatically releases when a force greater than 10lb is applied.

FluidLogic
FluidLogic Containment Bottle
from $129.95
FluidLogic Containment Bottle
The new WAVE of hydration is here!
The Fluidlogic WAVE is a complete hydration system that keeps your drink of choice cold and secure for your entire ride. Magnetic nozzle dock ensures quick one handed hydration with the flick of the wrist.
Features & Benefits
Kitchen grade stainless steel is roost and rust resistant.
Quick release bottle mount secures to any roll bar for convenient filling.
Available in 32oz and 64oz capacity for short and long rides
Keeps your drink cold for up to 8 hours
Keep your eyes on the road ahead with quick one-handed megentic operation
Stay hydrated outside your vehicle when parked at your favorite spot
Dust resistant silicone bite valve prevents dust and sand from sticking to the bite-valve
Insulated dairy-grade tubing keeps your drink cold in route to you
Wide mouth bottle opening makes it easy to add ice to keep your drink cold all day
Includes:
32oz or 64oz stainless steel bottle
Roll bar quick release mount & hardware
7.5ft of Dairy grade insulated draw tube
Magnetic draw hose dock
Dust & drip resistant silicone bite valve
Varying length straps for securing draw tube to roll bar

FluidLogic
Maglock Air Kit
$119.95
Maglock Air Kit
**Maglock Air hose NOT included**
Connection Perfection for forced air helmets.
Universal helmet & air hose fitment from the high G's at Indianapolis to the weekend on/offroad racer, MagLock® holds strong.
No more duct tape or zip ties, MagLock® technology creates an air-tight seal with 20lbs of force that will only let go when you need it to.
Lightweight nylon-infused ABS construction stands up to the rigors of motorsports and recreation.
Designed in California, food safe, fire resistant, and features patented technology.

Bell
Bell 10 Hole Top Air
from $79.95
Bell 10 Hole Top Air
Enhancing Helmet Ventilation for Optimal Airflow and Comfort
The Bell Helmets 10 Hole Top Air kit is designed to utilize the top and forehead ventilation channels on compatible Bell racing helmets. The Bell 10 Hole Top Air attachment allows your helmet to be cooled by an in-car forced air system. Bell's Top Air design directs airflow around the top of the helmet for comfort and onto the shield to reduce fogging.
The kits are attached using aggressive double-sided adhesive, and are available in Clear Plastic or Carbon Fiber. Nozzle configurations include V05, V05 45o, 90o, or Quick Lock V10. Bell's 10 Hole Top Air is fully compatible with the Maglock system using the standard V05 nozzle.
The Bell 10 Hole Top Air Fits the Following Helmets:
HP7
HP5
RS7C LTWT
RS7 Carbon
RS7 Pro
GT5
GT5 Carbon

Chillout Systems
Chillout Systems Wiring Harness
$75.00
Chillout Systems Wiring Harness
This 10 AWG wiring harness features a 10-foot shock-resistant rubber power cord wrapped in a protective textile fabric. Overall length is 14 feet.

Chillout Systems
ChillOut Systems Rapid Release Shirt Handle
$75.00
The Rapid Release dry break system, makes driver changes fast and effortless. No fumbling with tubes or connectors while under pressure. Just a quick press, and coolant/water starts flowing instantly. In an emergency, the connectors release when a force greater than 10 lbs is applied.
FEATURES:
Effortless dry break system
Emergency release feature
INCLUDED:
2 x 1/4" barbed quick-release fittings
1 x driver-side handle
2 x 36" reinforced, non-kinking extensions
2 x 1/4th to 5/16th barrel connectors
2 x 1/4th to 1/4th barrel connectors
2 x 36" reinforced cooling tubes

Chillout Systems
Chillout Systems 4" 285 CFM Blower
$65.00
Chillout Systems 4-Inch 285 CFM Blower
An ultra-efficient and lightweight design, the Chillout 4-inch 285 CFM blower offers high air output and low amp draw. This is the most powerful and reliable blower in its class.
FEATURES:
285 cubic feet per minute (CFM)
4.7 Amps
12 Volts
Lightweight, durable, and ultra-reliable

Chillout Systems
Chillout Systems 3" Air Duct Plenum
$48.00
Chillout Motorsports 3" Air Duct Plenum connects to your Cooling System, efficiently increasing cooling performance whilst simultaneously reducing amp draw from your electrical system.
The plenum is designed to fit the intake side of your Quantum Cooler, allowing for much cooler air to be forced through the system via the 3" duct. A 200 CFM blower (Minimum) is required in conjunction with the plenum for the best performance.The 3" Air Duct Plenum attaches via the plenum holder found on the front of the Quantum Cooler systems (V2 and above), creating a seal to keep the cooler pressurized with the cool air. Forcing cool air through the system and out through the exhaust side of the cooler is the most efficient way to reach maximum cooling - no wasted cool air, and the cooling shirt system appreciates every bit of cool air it can get.INCLUDED:
3" Air Duct Plenum

Stilo
Stilo ST5 Hydration Kit
$38.11
$42.34
Stilo ST5 Helmet Hydration Kit
Hydration bite-valve kit designed specifically for the Stilo ST4 and ST5 helmet.
KIT INCLUDES:
(1) Male hydration connector
(1) Female hydration connector
(1) Hydration tube
(1) Bite valve

FluidLogic
Maglock Air Hose
from $31.80
Maglock Air Hose
**Maglock Air hose side NOT included**
Maglock Air Hose is built to our exact specifications to ensure that you get the lightest, most flexible hose on the market today. The feedback from our test pilots ensures you that neck fatigue during use is greatly reduced, furthermore, this hose does not leverage or disconnect the Maglock Air in high G or high impact environments. Used by top motorsports athletes including all Andretti Indy cars, Ricky Stenhouse Jr. (NASCAR), Ricky Johnson (TT), and Guy Cosmo (IMSA). We highly recommend our hose to be paired with Maglock Air.

Chillout Systems
Chillout Systems 1.5 Liter Coolant Formula
$30.00
Chillout Systems 1.5 Liter Coolant Formula
This 1.5 liters of coolant will last a single racer an entire season!
Non-toxic and biodegradable coolant that circulates through your Chillout Systems cooler and cooling garments, keeping you cool and your cooler running in prime condition. Does not evaporate, greatly extending the amount of time between refilling your system.
Chillout cooling garments encase tubular veins within the material, covering a large surface area of the body to keep you cool, dry, and focused.
We suggest you replace the Chillout Coolant in your system at least once per race season. It takes less than two minutes and keeps your cooling system running in peak condition.
Sign Up and Save
Subscribe to our eNewsletter to learn about events near you, great deals, new products and for tips to improve your creator skills.