Cooling Accessories

FluidLogic Containment Bottle The new WAVE of hydration is here! The Fluidlogic WAVE is a complete hydration system that keeps your drink of choice cold and secure for your entire ride. Magnetic nozzle dock ensures quick one handed hydration with the flick of the wrist. Features & Benefits Kitchen grade stainless steel is roost and rust resistant. Quick release bottle mount secures to any roll bar for convenient filling. Available in 32oz and 64oz capacity for short and long rides Keeps your drink cold for up to 8 hours Keep your eyes on the road ahead with quick one-handed megentic operation Stay hydrated outside your vehicle when parked at your favorite spot Dust resistant silicone bite valve prevents dust and sand from sticking to the bite-valve Insulated dairy-grade tubing keeps your drink cold in route to you Wide mouth bottle opening makes it easy to add ice to keep your drink cold all day Includes: 32oz or 64oz stainless steel bottle Roll bar quick release mount & hardware 7.5ft of Dairy grade insulated draw tube Magnetic draw hose dock Dust & drip resistant silicone bite valve Varying length straps for securing draw tube to roll bar

Keep Your Stilo ST5 Helmet Ventilated With The Stilo Top Air Kit Fresh air keeps you cool and keeps sweat from getting in your eyes as you take the checkered flag. Endurance racers keep their focus high and lap times low by staying in the cool zone. This unique cooling system feeds air from your car’s fresh air system to both the top of your head and to the front of your face, while at the same time helping keep the inside of your visor clear. This system integrates into the existing design of the ST5 helmet and does not require any drilling of the shell or modifications to the internal EPS foam. There are four small ventilation holes molded into the top of every ST5 helmet. Stilo's Top Air system fits over the forward two holes and extends down the front of the helmet and just under the top of the visor. Air fed into the Top Air is directed both to the top of the head and down over the face. A small deflector just inside the visor area directs air towards the visor and away from the eyes. Old air flows out of the rear holes on the top of the helmet and from the bottom of the helmet, significantly reducing CO2 buildup in the helmet. Stilo's Top Air System can be fitted to all Stilo ST5 model helmets. It comes in two sizes to best fit your helmet: YA0834 Non-Adjustable for helmets XS 54cm to L 59cm YA0857 Non-Adjustable for helmets L+ 60cm to 4XL 64cm

Maglock Air Kit **Maglock Air hose NOT included** Connection Perfection for forced air helmets. Universal helmet & air hose fitment from the high G's at Indianapolis to the weekend on/offroad racer, MagLock® holds strong. No more duct tape or zip ties, MagLock® technology creates an air-tight seal with 20lbs of force that will only let go when you need it to. Lightweight nylon-infused ABS construction stands up to the rigors of motorsports and recreation. Designed in California, food safe, fire resistant, and features patented technology.

Bell 10 Hole Top Air Enhancing Helmet Ventilation for Optimal Airflow and Comfort The Bell Helmets 10 Hole Top Air kit is designed to utilize the top and forehead ventilation channels on compatible Bell racing helmets. The Bell 10 Hole Top Air attachment allows your helmet to be cooled by an in-car forced air system. Bell's Top Air design directs airflow around the top of the helmet for comfort and onto the shield to reduce fogging. The kits are attached using aggressive double-sided adhesive, and are available in Clear Plastic or Carbon Fiber. Nozzle configurations include V05, V05 45o, 90o, or Quick Lock V10. Bell's 10 Hole Top Air is fully compatible with the Maglock system using the standard V05 nozzle. The Bell 10 Hole Top Air Fits the Following Helmets: HP7 HP5 RS7C LTWT RS7 Carbon RS7 Pro GT5 GT5 Carbon

Chillout Systems Wiring Harness This 10 AWG wiring harness features a 10-foot shock-resistant rubber power cord wrapped in a protective textile fabric. Overall length is 14 feet.

The Rapid Release dry break system, makes driver changes fast and effortless. No fumbling with tubes or connectors while under pressure. Just a quick press, and coolant/water starts flowing instantly. In an emergency, the connectors release when a force greater than 10 lbs is applied. FEATURES: Effortless dry break system Emergency release feature INCLUDED: 2 x 1/4" barbed quick-release fittings 1 x driver-side handle 2 x 36" reinforced, non-kinking extensions 2 x 1/4th to 5/16th barrel connectors 2 x 1/4th to 1/4th barrel connectors 2 x 36" reinforced cooling tubes

Chillout Systems 4-Inch 285 CFM Blower An ultra-efficient and lightweight design, the Chillout 4-inch 285 CFM blower offers high air output and low amp draw. This is the most powerful and reliable blower in its class. FEATURES: 285 cubic feet per minute (CFM) 4.7 Amps 12 Volts Lightweight, durable, and ultra-reliable

Our Neoprene Air Duct Hose is extremely flexible, pliable and structurally strong thanks to a coated spring-steel wire support helix that prevents it from collapsing. The fiberglass fabric cover and fiberglass cord are both impregnated and coated with neoprene rubber.With a temperature range between -45° F to 330° F, this makes it ideal for most applications, most importantly bringing fresh/cool air to your Quantum Cooler. Also perfect for cockpit cooling and other low-pressure ducting applications where extreme heat can't be avoided. Under-hood applications such as connecting an air intake to an airbox, or an airbox to a throttle body are also great uses.FEATURES: 4" Interior Diameter 330ºF Heat Resistance

Chillout Motorsports 3" Air Duct Plenum connects to your Cooling System, efficiently increasing cooling performance whilst simultaneously reducing amp draw from your electrical system. The plenum is designed to fit the intake side of your Quantum Cooler, allowing for much cooler air to be forced through the system via the 3" duct. A 200 CFM blower (Minimum) is required in conjunction with the plenum for the best performance.The 3" Air Duct Plenum attaches via the plenum holder found on the front of the Quantum Cooler systems (V2 and above), creating a seal to keep the cooler pressurized with the cool air. Forcing cool air through the system and out through the exhaust side of the cooler is the most efficient way to reach maximum cooling - no wasted cool air, and the cooling shirt system appreciates every bit of cool air it can get.INCLUDED: 3" Air Duct Plenum

Select from the options here to get the right mounting tray for your Chillout Systems Quantum Cooler (v3 or Pro).

Maglock Air Hose **Maglock Air hose side NOT included** Maglock Air Hose is built to our exact specifications to ensure that you get the lightest, most flexible hose on the market today. The feedback from our test pilots ensures you that neck fatigue during use is greatly reduced, furthermore, this hose does not leverage or disconnect the Maglock Air in high G or high impact environments. Used by top motorsports athletes including all Andretti Indy cars, Ricky Stenhouse Jr. (NASCAR), Ricky Johnson (TT), and Guy Cosmo (IMSA). We highly recommend our hose to be paired with Maglock Air.

Chillout Systems 1.5 Liter Coolant Formula This 1.5 liters of coolant will last a single racer an entire season! Non-toxic and biodegradable coolant that circulates through your Chillout Systems cooler and cooling garments, keeping you cool and your cooler running in prime condition. Does not evaporate, greatly extending the amount of time between refilling your system. Chillout cooling garments encase tubular veins within the material, covering a large surface area of the body to keep you cool, dry, and focused. We suggest you replace the Chillout Coolant in your system at least once per race season. It takes less than two minutes and keeps your cooling system running in peak condition.

BELL Cover plate & FORCED AIR low profile nozzle for HP6/GT6 helmet, clear Kit consist of:1 Pcs FORCED LOW PROFILE NOZZLE1 Pcs COVER PLATE2 Sets* SEAL KIT *Each SEAL KIT set contains 2 pieces of 20 x 80mm and 2 pieces of 20 x 120mm.

Chillout Systems Dual Prong Adaptor Designed to withstand wear, this military-grade dual-prong liquid connector maximizes the reliability of your driver cooling unit. The dual-prong design latches securely, enabling your Chillout hose to be linked to your system while preventing unintentional release. Dual-prong adapter connects Chillout cooling garments (or other brands cooling shirts with ¼” tubing) to a Chillout Systems driver cooling system with ¼” adapters.

Chillout Systems Hose Connectors (Pair) Designed to withstand wear, these military-grade cooling adapters improve the reliability of the Chillout Quantum Cooler by latching securely and enabling coolant formula to cycle through the system with no leakage. This ultra-durable design allows thousands of dry connections and disconnections. Sold in pairs.