Composite Helmets

Stilo ST5.1 GT Offshore Composite Helmet SA2020 Stilo ST5.1 GT Offshore -- The Legend Returns The Stilo ST5.1 GT Offshore SA2020 helmet carries over everything that made the Stilo ST5 GT one of the most-loved helmets in motorsports. Featuring the same tall eyeport and iconic side ports of the previous generation, the ST5.1 GT from Stilo is worth getting excited about. The Offshore version, with its easy-to-spot bright orange shell, is already wired up for communications through the left-side port. One of the great things about Stilo GT Series helmets is their adjustability using Stilo helmet padding. Crown padding, cheek padding and different ear muff sizes are all available to customize the fit of your Stilo helmet. Stilo GT Helmets Feature Unrivaled Features and Flexibility The Stilo ST5.1 GT Offshore Composite is unsurpassed in built-in flexibility. Each of its two side ports can be fitted with one of three different types of integrated communication electronics, forced air, or a hydration system. Thanks to its innovative shell design, mounting and routing these options to the Stilo ST5.1 GT Offshore is sleek and seamless. When not in use, you don't even know the features are there. Stilo offers simply the best modular racing helmet on the market. This helmet includes communications pre-installed in the left port. Stilo ST5.1 GT SA2020 Offshore Composite Helmet Orange Details: Manufacturer: Stilo Manufacturer part number: DA0702BF2T Color: Orange Homologation: Snell SA2020 Shield lock position: center Replaceable cheek pads: yes Noise attenuating earmuffs: yes Sizes: XS to XXXL (54cm to 64cm) Additional Stilo ST5.1 GT Offshore helmet shields available here A Note on Stilo Sizing: We have found that customers who wear a 59cm helmet in other brands are most comfortable in a 60cm Stilo ST5.1 GT Composite, which uses the larger shell size. This helmet will ship to you with signature required for delivery.

Stilo Venti WRC Composite: Uncompromising Safety & Performance FIA 8859-2015 and Snell SA2020 Certified The new Stilo Venti WRC Composite auto racing helmet features lightweight construction using the smallest of three available shells for the smallest and lightest helmet available. Designed specifically for motorsport enthusiasts, the Stilo Venti WRC helmet is built to withstand the demands of high-speed racing, ensuring optimal safety during intense driving scenarios. Stilo Venti WRC Composite helmet is FIA 8859-2015 and SA2020 certified. This Stilo Venti WRC helmet meets the highest safety standards set by those renowned organizations. It guarantees top-tier protection for professional and amateur racers alike. With its unique ventilation system, the Stilo Venti WRC helmet offers superior airflow, keeping you cool and focused even during long races or under extreme conditions. Stilo Venti WRC helmet's aerodynamic design reduces drag, allowing for enhanced performance and improved stability at high speeds, giving you a competitive edge on the track. The interior padding of the Stilo Venti WRC helmet can be easily removed and cleaned, ensuring a fresh and comfortable fit for every race. Integrated Comms Package Leads the Rally Racing World Stilo Venti WRC helmet is equipped with innovative noise-canceling features from the redesigned boom with all new geometry for maximum visibility and sound quality, this minimizes external distractions, allowing you to maintain focus and concentration on the track ahead. The Stilo Venti WRC helmet features an all new aggressive design featuring an adjustable visor, providing optimal visibility and allowing you to customize your field of view for different driving conditions. The Stilo Venti WRC helmet is a professional-grade helmet trusted by professionals, the Stilo Venti WRC is the pinnacle of safety and performance in motorsport, offering uncompromising quality for your racing needs. Invest in the Stilo Venti WRC helmet today and experience unparalleled safety, comfort, and performance on the racetrack. Dominate every curve with confidence and stay ahead of the competition.The Stilo Venti WRC is the update of the legendary WRC helmet as worn by multiple rally champions. This helmet features many improvements most notably the innovative wireless (WL) communication system. The new wireless key available allows the driver and co-driver to continue to communicate even when outside of the car. The microphone boom shape has been improved to further deflect cabin noise, improving the communication clarity between co-driver and driver. The magnetic dynamic, noise-canceling microphone is adjustable to allow for optimum spacing from the mouth to reduce external noise. Noise attenuating ear muffs in the Stilo Venti WRC surround the speakers to hugely reduce external noise and improve the levels of comfort. The Stilo Venti WRC helmet's electronics is also compatible with traditional Stilo wired amplifiers or the new wireless amplifiers. The adjustable peak of the Stilo Venti WRC helmet can be raised/lowered to give optimal visibility with low sun. Supplied with factory fitted HANS Post anchors as standard. Also Available with FIA 8860-2018 certification How to Properly Measure Your Head The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

The Arai GP-7 SA2020 Auto Racing Helmet A driver favorite, the Arai GP-7 SA2020 helmet combines the most popular Arai features with new, improved upgrades. The Arai GP-7 is constructed with Arai’s own PBcLc (Peripherally Belted Complex Laminate Construction) helmet shell with the same shell shape as the top-of-the-range GP-7SRC model used in Formula 1. New ventilation, a soft EPS liner, and a wider eye port for optimized peripheral vision are part of this new shell which gives the driver notable strength and flexibility. Replaceable cheek pads make racing comfortable for any driver, as do the three larger, closeable intake vents and two larger exhaust vents on the ventilation system. The Arai GP-7 helmet is Snell SA2020 certified with factory-installed M6 washers/nuts. Drivers of any skill level can install their own Head and Neck Restraint system using a 6mm bolt. The FIA-8859-2015 certification sticker is applied to the interior liner of the helmet. Arai Positive Shield Latch Simple yet effective, the positive latch mechanism on the Arai GP-7 SA2020 helmet gives the driver solid shield latching, but is seamlessly integrated into the standard shield system for ease of use. New Shield Pivot for the Arai GP-7 The Arai GP-7 SA2020 features new shield pivot hardware with improved aerodynamics based on the updated track slider design. An increased peripheral field of view is featured on the 6 series, which surpasses the 5 series in visibility. The wider eye port, shield, and pivot hardware were all developed on the RC and adapted to the Arai GP-7 SA2020 helmet. Additional Arai GP-7 visor shields available here. ARAI GP-7 Increased Ventilation and Comfort Increased airflow is key to the GP-7 SA2020 helmet’s design. This includes bigger, closeable intake vents with large 10mm holes in both front and rear. Larger rear vents also provide better airflow. M6 HANS Anchors for the Arai GP-7 Helmet Drivers of all skill levels will appreciate the integrated, pre-installed M6 threaded washer/nut with 6mm threads which accepts a range of Head and Neck Restraint devices. A flat surface area around the mounting nut will let the anchor post base to rest flush along the surface of the helmet and around the full perimeter of the anchor base. FIA-8859-2015 certification sticker applied to the interior liner material. Featuring a Redesigned Chin Bar The Arai GP-7 SA2020’s new, ergonomic chin bar and ridge at the bottom edge of the shell lowers the center of gravity and increases the structural integrity of the helmet. Additional improvements include a rise in the shell above the shoulders for increased clearance. E-Ject Ready Crown Pad for Safer Removal Arai's optional E-Ject system can be easily accommodated via a pre-cut pocket under the helmet’s crown pad. This system makes removal of the helmet by track safety crew easier and less likely to jostle an unconscious driver's head in the event of an accident Arai GP-7 Auto Racing Helmet Details: Manufacturer: Arai Helmet Manufacturer part no.: GP7SA20 Snell SA2020 certified PBcLc (Peripherally Belted Complex Laminate) shell construction Removable chin liner to accommodate a drink system Sizes: 54cm (X-Small) to 60cm (Large) Exterior colors: Gloss White or Black Frost A Note About Helmet Fitment and Head Measurement The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

Bell Racing Helmets RS7 Pro FIA8859-2024/SA2025 Helmet The Bell RS7 Pro brings advanced design and lightweight carbon-composite construction straight from Bell’s HP7 pedigree. Built for competitive drivers who demand both performance and comfort, the RS7 features aerodynamic refinement, an advanced ventilation system, and modern safety certifications. From sprint races to endurance events, this helmet delivers pro-level focus and protection on track. Next-Level Racing Helmet Technology Using Bell’s proprietary high-pressure molding system, the RS7 Pro maximizes shell strength while minimizing weight. The Double Screen Anti-Fog (DSAF) visor ensures clarity under all conditions, while a 14-channel ventilation system enhances cooling and cockpit comfort. Designed with integrated channels for drink tube and radio systems, the RS7 Pro adapts to the demands of any racing environment. Features • FIA8859-2024 and Snell SA2025 certified• Lightweight carbon composite shell• Multi-density, multi-piece liner for maximum impact absorption• Optical-grade injection-molded DSAF visor• Advanced top and chin bar ventilation with 14 intake/exhaust channels• Aerodynamic shell and shield design for high-speed stability• Drink tube and radio system ready with integrated channels• Optional top-air attachments and spoilers available• Factory-installed HANS posts• Synthetic rubber gasket seal keeps dirt and water out• Shield and pivot kit: SE07, SV(SE07)• Available colors: White or Matte Black• Sizes: 54cm (6 3/4) to 61cm+ (7 5/8) Bell Racing Helmet Size Chart Bell RS7 Pro Helmet FAQs: What certifications does the Bell RS7 Pro carry? It is homologated to FIA8859-2024 and Snell SA2025 standards, approved for competition worldwide. How is the ventilation system designed? The helmet features 14 intake and exhaust channels, delivering excellent cooling and airflow in demanding conditions. Is the visor anti-fog? Yes, the SE07 visor is a Double Screen Anti-Fog (DSAF) system, ensuring visibility in all conditions. What comes in the box? The RS7 Pro includes a clear SE07 visor (installed), drawstring helmet bag, HANS posts, and tear-off posts. Engineered from Bell’s championship-winning HP7 platform, the RS7 Pro FIA8859-2024/SA2025 helmet offers pro-level features at a versatile price point. Order today and step onto the grid with the confidence of Bell’s cutting-edge safety and performance.

Bell MAG-10 Rally Pro Open Face Helmet Experience the pinnacle of motorsports protection with the Bell open face helmet, fully compliant with FIA 8856-2015 homologation standards. Crafted from a lightweight yet robust fiberglass-carbon composite shell, this helmet promises durability without compromising on comfort. Key features include the state-of-the-art ZeroNoise intercom set, a built-in Nexus socket with a removable cover, and a detachable chin bar designed specifically for a microphone arm. For added convenience, it comes with easily removable cheek pads. The adjustable peak paired with an integrated anti-scratch dark smoked sunscreen ensures optimal vision in varying conditions. Plus, for enhanced safety, it's fitted with HANS clips, making it a top choice for motorsports enthusiasts who prioritize both style and safety." Bell Mag-Pro Rally Helmet Features & Options: Compliant with FIA 8856-2015 homologation standards Lightweight fiberglass-carbon composite shell ZeroNoise intercom set integration Built-in Nexus socket with removable cover Detachable chin bar for microphone arm flexibility Easily removable cheek pads for comfort customization Adjustable peak for varied lighting conditions Integrated anti-scratch dark smoked sunscreen Equipped with HANS clips for enhanced safety Designed for elite motorsports enthusiasts

Stilo ST5.1 GT Composite Helmet SA2020 Still #1 With Integrated Flexibility The Stilo ST5.1 GT Composite is Stilo's Snell SA2020 version of their best-selling kevlar-carbon composite helmet. With an autoclave molded shell, the Stilo ST5.1 GT Composite auto racing helmet offers superior safety and protection compared to fiberglass and composites of competitors helmets. You get all this without sacrificing comfort or features, as Stilo continues to focus on minimizing weight and maximizing flexibility. With its large eye port, the Stilo ST5.1 GT Composite offers unsurpassed peripheral vision and all of the available tinted, mirrored, and iridium-colored visors (sold separately) have a center pinch-clip to make opening and closing easy, even while wearing nomex racing gloves. Additional visor shields for the Stilo ST5.1 GT. Although updated to meet the newest Snell SA2020 certification, the Stilo ST5.1 GT retains its FIA 8858-2015 homologation as well. This makes the helmet legal in nearly all road-racing competition (some sanctioning bodies do require FIA 8860 homologated helmets.) Stilo ST5.1 GT Gives You the Ultimate in Flexibility Built In The Stilo ST5.1 GT Composite is unsurpased in built-in flexibility. Its two side ports can be fitted with 3 different types of integrated communication electronics, forced air, helmet eject system, or a hydration system. Thanks to its innovative shell design, mounting and routing these options to the Stilo ST5.1 GT is sleek and seamless. When not in use, you don't even know the features are there. Whether you're using side-mounted communications, side air, or a built-in hydration kit for staying hydrated during long enduro stints, everything is neat, tidy and completely out of the way when not needed. Stilo offers simply the best modular racing helmet on the market. Industry-standard M6 threaded receivers are molded into the helmet shell to accommodate anchors for whichever head-and-neck restraint you use. Note: We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the large shell. Please order accordingly. Stilo ST5.1 GT Composite SA2020 Helmet Details: Manufacturer: Stilo Helmets Manufacturer part no.: AA0700AF2T Noise attenuating earmuffs are included to reduce exterior noise Seamlessly integrate communications, forced air, hydration and/or eject options into your Stilo ST 5.1 GT helmet Snell SA2020 certification Existing Stilo ST5 visor shields and accessories work on ST5.1 SA2020 helmets Exterior colors: Gloss Silver, Gloss White, Matte Black Interior color: Black, (Blue interior is available with Gloss White only, by special order) Stilo Offers Several Versions of the Venerable ST5.1 GT Carbon fiber: Stilo Helmets ST5.1 GT Carbon Helmet FIA 8860-2018: Stilo Helmets ST5 GT ZERO 8860-2018 Carbon Helmet FIA 8860-2018 ZERO: Stilo Helmets ST5 GT 8860-2018 Carbon Helmet A Note About Helmet Sizing and Head Measurement The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

Sparco Air Pro RF-5W: Retro Inspired From 1977 The Air Pro RF-5W 1977 is a painted version of the Sparco Air Pro RF-5W. This retro inspired helmet has a white base with blue or red stripes beneath a durable clear coat finish. The Sparco Air Pro RF-5W 1977 features a carbon-kevlar and fiberglass construction with a wider eye opening that can be used for open wheel or closed cockpit driving. Multiple exterior vents increase air circulation throughout a redesigned interior. This interior has channels that cool the driver, plus additional channels routing air towards the visor to reduce the chance of visor fogging. The Sparco Air Pro RF-5W 1977 has removable, washable padding that can be repositioned for a comfortably personalized fit. All interior seams have been removed from areas where greater pressure is exerted on the head. The Air Pro RF-5W 1977 has been designed to accommodate a drink tube and an intercom system (both sold separately). Available in white with blue or red stripes, the Sparco Air Pro RF-5W 1977 has HANS posts pre-installed. Snell SA2020 and FIA 8859-2015 approved. Sparco Racing Helmets History of Innovation and Excellence Today's Sparco auto racing helmet line is the result of over 40 years of research and development experience, including wind tunnel testing. The new range was designed to meet the requirements of both Snell SA2020 and FIA 8859-2015 ratings. To meet these requirements Sparco introduced new innovations for driver safety and comfort. All auto racing shells now have layers of Carbon-Kevlar for greater strength. Sparco helmets have been wind-tunnel tested to maximize exterior vent placement and air flow. The EPS interiors and padding have also been redesigned for increased air flow and driver comfort. Sparco also introduced a new size: Medium/Large. This M/L size takes advantage of using the smaller helmet shell which is lighter and more compact. Sparco Air Pro RF-5W 1977 Auto Racing Helmet Details: Manufacturer: Sparco Manufacturer part no.: 003375 Snell SA2020 and FIA 8859-2015 approved Painted retro design in either red or blue Lightweight carbon-kevlar/fiberglass construction Pre-molded interior to accommodate accessories like drink tubes and an intercom system (accessories sold separately) New Medium/Large size uses lighter, more compact shell Anodized aluminum chin strap hardware Removable, washable lining Wind tunnel optimized venting with anti-fog air channels Additional Sparco RF-5W Pro helmet shields available here. Sparco Air Pro RF-5W 1977 Auto Racing Helmet Sizes: 54cm (X-Small)) 55-56cm (Small) 57-58cm (Medium)) 59cm (Medium/Large)) 60cm (Large)) 61cm (X-Large)) 62cm (XX-Large)) Proper Helmet Fitment and Head Measurement The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

Bell GT6 Pro Helmet FIA8859-2024 / SA2025 The Bell GT6 Pro is a professional-grade racing helmet designed for serious drivers who demand uncompromising protection and clarity. Featuring dual homologation to FIA8859-2024 and Snell SA2025 standards, this helmet is built for top-level competition while offering the comfort and ventilation needed for endurance events and track days. Advanced safety and performance in one package Dual certification Certified to both FIA8859-2024 and Snell SA2025 standards, the GT6 Pro is approved for worldwide motorsport competition and ready for years of racing to come. Lightweight composite shell Engineered with a strong composite shell construction, the GT6 Pro delivers excellent impact protection while keeping weight down to reduce fatigue over long stints behind the wheel. Optimized ventilation system Multiple intake and exhaust vents maximize airflow through the helmet, helping drivers stay cool and focused even in the most demanding racing conditions. Wide eyeport and anti-fog visor The helmet’s large eyeport provides exceptional field of view, paired with a standard SE06 double screen anti-fog visor for clear vision in every condition. BELL GT6 PRO SA2025 AUTO RACING HELMET SIZE CHART BELL GT6 PRO SA2025 AUTO RACING HELMET FIA8859-2024 / SA2025 FAQs What certifications does the GT6 Pro carry? The GT6 Pro is dual certified to FIA8859-2024 and Snell SA2025 standards, making it approved for a wide range of international and domestic racing series. Does the GT6 Pro support HANS devices? Yes, the helmet comes HANS-ready with integrated anchor points for use with all popular head and neck restraint systems. What visor is included with the helmet? The GT6 Pro includes an SE06 double screen anti-fog visor for superior clarity and fog resistance. Who is the GT6 Pro best suited for? This helmet is designed for professional and amateur drivers competing in FIA or Snell-sanctioned events, as well as track-day enthusiasts looking for maximum protection and visibility. The Bell GT6 Pro FIA8859-2024 / SA2025 delivers world-class safety and professional performance in a sleek, lightweight design — the ultimate choice for serious racers.

Bell Racing Helmets RS7 Pro Based on the Bell HP7 helmet design and featuring a lightweight carbon composite shell using Bell’s high-pressure proprietary molding system, the Bell Helmets RS7 Pro auto racing helmet uses an innovative shell and shield design to improve acoustic comfort, aerodynamic performance and energy absorbing capabilities. The sleek, modern design features an advanced ventilation system with 14 air-intake and extraction channels that can be used with or without air-intake covers (available separately). The BELL RS7 helmet double screen anti-fog (DSAF) visor and rubber gasket seal ensured air, water and dust will not enter the eye port. Beautiful Bell RS7 Colors in All the Right Sizes Solid colors: White, Matte Black Graphics colors: Stamina Grey, Stamina Red Sizes: 54cm (6 3/4) to 61cm+ (7 5/8) Bell RS7 Pro Auto Racing Helmet Details: Manufacturer: Bell Racing Helmets Manufacturer part no.: 1310Axx Snell SA2020 and FIA 8859-2015 certified Lightweight carbon composite shell Advanced multi-density, multi piece liner maximizes energy absorption and impact performance Optical-grade injection molded Double Screen Anti-Fog (DSAF) visor Powerful top and chin bar ventilation system with 14 air channels Shell and shield design optimized for aerodynamic performance Integrated interior channels for drink tube and radio systems Air intake, side-air extractors, rear spoiler, top- and chin-bar gurneys available Top-air attachments available for use with external cooling systems Factory-installed HANS posts Synthetic rubber gasket seal prevents dirt and water entering the helmet Shield and pivot kit: SE07, SV(SE07) Additional SE07 shields for the Bell RS7 Pro helmet available here. In the Box of the Bell RS7 Pro: Bell RS7 Pro SA2020 auto racing helmet Clear SE07 DSAF shield Draw string Bell helmet bag HANS post anchors installed This helmet will ship with signature required for delivery.

Sparco Air Pro RF-5W Auto Racing Helmet The current Sparco auto racing helmet line is a result of over 40 years of research and development experience, including wind tunnel testing and work with some of history's great racing teams. Sparco's latest Air Pro RF-5W helmet lineup was designed specifically to meet the requirements of the Snell SA2020 and FIA 8859-2015 ratings. Sparco has introduced several innovations for driver safety and comfort. All shells now have layers of carbon-kevlar for increased strength without added weight. The helmets have been wind-tunnel tested to optimize exterior vent placement and air flow. And new EPS interiors and padding were redesigned for increased airflow and driver comfort. Sparco also introduced a new Medium/Large helmet size taking advantage of their smaller, lighter, more compact shell. Check out Sparco Air Pro RF-5W helmet shields here. Sparco Air Pro RF-5W Auto Racing Helmet Details: Manufacturer: Sparco Manufacturer part no.: 003375 Snell SA2020 and FIA 8859-2015 approved Lightweight carbon-kevlar/fiberglass construction Wind tunnel optimized venting with anti-fog air channels New "Medium/Large" size uses lighter, more compact shell Anodized aluminum chin strap hardware Removable, washable lining Pre-molded interior accepts drink tubes and intercom system (sold separately) Sparco Air Pro RF-5W Helmet Colors & Sizes: 54cm (X-Small) to 62cm (XX-Large) Gloss White or Matte Black The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

Arai Auto Racing GP-5W SA2020 Helmet The Arai GP-5W SA2020 helmet is perfect for stock car, sedan, and rally drivers. The GP-5W is a favorite because of its tall 90mm (~3.5”) top-to-bottom eye port. The GP-5W uses its own exclusive shield with this larger opening. The Arai GP-5W is Snell SA2020 certified with M6 washer/nuts installed at the factory. Drivers of any experience level will be able to easily install their Head and Neck Restraint system anchor posts (sold separately). The Arai Auto Racing GP-5W SA2020 also comes with the FIA-8859-2015 certification sticker found on the shell’s interior lining. Arai Advanced Technology ScLc Helmet Shell The Arai GP-5W Helmet is built with Arai's exclusive, very-lightweight ScLc (Super Complex Laminate Construction) shell technology. This ensures a low overall weight to offset the added weight of the helmet’s larger shield. Innovative GP-5W Racing Helmet Shell Shape The Arai Auto Racing GP-5W helmet SA2020 helps reduce fatigue for the driver due to its more natural head shape, smaller shell size, and lower center of gravity to assist with balance and stability. Interior Fit of the Arai GP-5W The Arai Auto Racing GP-5W Helmet SA2020 is designed to closely match the shape of the human head, allowing for a snug, yet comfortable, fit. Arai has developed this “natural” shape over more than 50 years of helmet design research and refinement. Taller Eye Port for Increased On-Track Vision Sedan drivers will appreciate the larger 90mm eye port, top to bottom. A visor peak is available for drivers not needing a shield on the The Arai Auto Racing GP-5W Helmet SA2020. ARAI GP-5W Removeable/Replaceable Cheek Padding Low maintenance, easy-to-clean cheek pads are removable, washable, and replaceable with pads of varying thickness to provide a snug, safe fit. Threaded for M6 HANS Anchors The FIA-8859-2015 certified GP-5W helmet has M6 threaded washer/nuts with 6mm threads pre-installed. This convenient feature lets the driver use the anchor system that works best with their Head and Neck Restraint. The anchor posts are made to rest flush on the helmet surface, accepting a variety of HNR anchor systems. Extraordinary Air Flow and Ventilation Closed-cockpit drivers need greater airflow when racing. The upper ventilation system of the GP-5W SA2020 helmet incorporates two exhaust vents and two large intake ducts to help keep the driver cool and comfortable. Multiple Shields Available for the Arai GP-5W A variety of shields for the Arai GP-5W are available here. Arai anti-fog shields come in clear, light tint and dark smoke. Standard shields also come in clear, light tint and dark smoke. The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship to you with signature required for delivery.

Bell Racing Helmets GTX.3 SA2020 Composite With its refined, aerodynamic design and lightweight carbon composite shell, the Bell Racing Helmets GTX.3 Composite SA2020 helmet provides the best performance and pro features for open wheel, open compartment, karting, formula and dirt track racers. This Bell GTX.3 Composite SA2020 has an integrated shield and dual screen anti-fog (DSAF) visor with rear-facing vents which are ideal for these forms of racing, allowing for air exchange and unobstructed vision without worrying about dust and dirt. Bell Racing GTX.3 Auto Racing Helmet Features Snell SA2020 and FIA 8859-2015 homologation Includes clear SE03 3mm DSAF shield (SV SE03/05 pivot system) with DSAF anti-fog insert Sleek aero styling with integrated wing Front chin bar Gurney ("duckbill") improves high-speed aerodynamic performance Venturi airflow system lets fresh air in, hollow synthetic rubber gasket seal keeps dirt, water and dust out High-strength, lightweight carbon-composite construction using new high-pressure molding system Multi-piece, multi-density high-impact custom bead absorbing liner for low- and high-velocity impact protection Ultra-plush grey Comfort-Max FR® interior fabric wicks away moisture Install integrated drinking tube and radio microphone systems with the integrated face piece channels Multi-density foam interior and contoured cheek pads offer a professional fit Standard-sized eye port M6 terminal hardware and hex wrench for Head and Neck Restraint devices Additional visor shields for the Bell Racing GTX.3 available here.

Bell Racing Helmets GT6 Pro Composite SA2020 The Bell Racing GT6 Pro auto racing helmet features the same modern and aggressive design as HP6, developed for racers in closed-car environments and featuring a wide eyeport for extended vision with a lightweight Premium carbon glass shell. Its ventilation slots can be connected to various types of air intakes for external cooling systems. It can be fitted with optional ear cups providing optimal noise insulation, with fully integrated radio communication kit and hydration systems (available separately). Bell GT6 Pro Auto Racing Helmet Features Lightweight premium carbon/fiberglass composite shell FIA 8859-2015 and Snell SA2020 homologated Wide eye port for excellent vision in closed-cockpit cars Advanced multi-density, multi-piece liner maximizes energy absorption and impact performance Integrated channels in face piece offer multiple options to install drink tube and radio systems Extraction vents maximize cooling and air circulation Factory-installed HANS anchors Optional top forced-air intake can be installed on the left or right top side vents for use with an external cooling system Optional ear cups increase noise insulation Interior: Dark Grey high-strength, high comfort FR fabric Additional Bell Racing GT6 Pro Helmet Visors Are Available Here Bell GT6 Pro Auto Racing Helmet Colors The Bell GT6 Pro is availabile in your choice of Gloss White or Matte Black. Bell GT6 Pro Auto Racing Helmet Sizes Available in Sizes: 54cm (6-3/4) to 61cm+ (7-5/8) What Comes in the Bell GT6 Pro Helmet Box? Bell Racing GT6 Pro SA2020 composite auto helmet Clear SE06 3mm DSAF shield (installed) Drawstring Bell helmet pouch Plastic tear-off posts (installed) Hex wrench key