Sparco

Sparco Shield RW-9 Nomex Pants The Shield RW-9 line of Nomex underwear provides the highest level of breathability, comfort and protection. When designing this line, Sparco studied the driver's sitting position to ensure ultimate fit and comfort. Shield RW-9 uses a seamless construction with ultra-soft stretchable material. There are two different woven materials in key areas; thin stretch Nomex for comfort and mobility as well as a double perforated Nomex for increased breathability and ultimate comfort. The minimal seams are stitched flat with thin specialized thread for added comfort. All Shield RW-9 pieces are treated with Sparco X-Cool Silver which draws heat from the body surface to cool the driver. In addition to cooling the driver, X-Cool Silver treatment has an anti-bacterial effect. The Shield RW-9 collection has pieces to fit every driver's style, including short-sleeved nomex t-shirts, long-sleeved nomex shirts, nomex pants, nomex balaclava, and nomex socks. SPARCO RW-9 UNDERLAYER PANTS FEATURES The Shield RW-9 line is SFI 3.3 rated Seamless stretchable Nomex in key areas for mobility Perforated knit in key areas for breathability Designed for comfort in a driving position Minimal external seams increase driver comfort X-Cool Silver draws heat from the body surface to cool the driver X-Cool Silver has anti-bacterial effect Available in white or black SPARCO RW-9 UNDERLAYER PANTS SIZE CHART

Sparco 600 Series Seat Mounting Base Fitment for a Wide Range of Cars and Trucks Sparco 600 Series seat bases utilize the factory seat mounts on your car's or truck's floor to give you a strong, flat mounting surface for your Sparco racing seat. Sparco 600 Series seat bases are vehicle specific for an easy, bolt-in installation. The 600 Series Sparco racing seat base is constructed with 3/16" steel providing a strong, flex-free mount. Sparco 600 Series racing seat mounting bases are powder coated in a black wrinkle finish for a clean look. In addition to the mounting holes provided for standard bolt-on installation, the Sparco base has a wide metal platform for custom installation of side mounts directly to the base (drilling required). Direct installation is handy in race vehicles where the lowest seat position is desired. Note: We carry Sparco 600 Series seat mounting bases for dozens of popular fitments in stock. For less-common fitments, it may take up to 10 business days for your mounting base to ship. Photos are of various Sparco 600 Series Mounting Bases. Your seat mounting base may differ. Sparco Seat Mounting 600 Series Base Details: Manufacturer: Sparco Manufacturer part no.: 600SB Construction: 3/16" steel Finish: wrinkle-finish black powder coating Outer mounting holes for wide side-mount racing seats Mounting surface allows direct installation of side mounts (some drilling may be required) Proper Installation of Your Sparco Racing Seat Requires: (1) Sparco 600 Series Seat Mounting Base (1) Set of two side mount brackets (steel or aluminum) (1) Side mounting hardware kit (50002) Optional (1) Track Set Seat Slider (00493)1 1 The Track Set Seat Slider allows for forward and aft seat adjustment. It is not SFI or FIA certified. Check with your sanctioning body before installing. Sparco 600 Series Seat Mounting Base Part Numbers Copy the SKU from the chart below and paste it into the "Input Part Number" field above when adding to cart.

Sparco Shield RW-9 Nomex Balaclava The Shield RW-9 line of Nomex underwear provides the highest level of breathability, comfort and protection. When designing this line, Sparco studied the driver's sitting position to ensure ultimate fit and comfort. Shield RW-9 uses a seamless construction with ultra-soft stretchable material. There are two different woven materials in key areas; thin stretch Nomex for comfort and mobility as well as a double perforated Nomex for increased breathability and ultimate comfort. The minimal seams are stitched flat with thin specialized thread for added comfort. All Shield RW-9 pieces are treated with Sparco X-Cool Silver which draws heat from the body surface to cool the driver. In addition to cooling the driver, X-Cool Silver treatment has an anti-bacterial effect. The Shield RW-9 collection has pieces to fit every driver's style, including short-sleeved nomex t-shirts, long-sleeved nomex shirts, nomex pants, nomex balaclava, and nomex socks. FEATURES The Shield RW-9 line is SFI 3.3 rated Seamless stretchable Nomex in key areas for mobility Perforated knit in key areas for breathability Designed for comfort in a driving position Minimal external seams increase driver comfort X-Cool Silver draws heat from the skin to cool the driver X-Cool Silver has anti-bacterial effect Available in white or black

Sparco Shield RW-9 Nomex Fireproof Shirt The Shield RW-9 line of Nomex underwear provides the highest level of breathability, comfort and protection. When designing this line, Sparco studied the driver's sitting position to ensure ultimate fit and comfort. Shield RW-9 uses a seamless construction with ultra-soft stretchable material. There are two different woven materials in key areas; thin stretch Nomex for comfort and mobility as well as a double perforated Nomex for increased breathability and ultimate comfort. The minimal seams are stitched flat with thin specialized thread for added comfort. All Shield RW-9 pieces are treated with Sparco X-Cool Silver which draws heat from the body surface to cool the driver. In addition to cooling the driver, X-Cool Silver treatment has an anti-bacterial effect. The Shield RW-9 collection has pieces to fit every driver's style, including short-sleeved nomex t-shirts, long-sleeved nomex shirts, nomex pants, nomex balaclava, and nomex socks. SPARCO RW-9 UNDERLAYER FEATURES The Shield RW-9 line is SFI 3.3 rated Seamless stretchable Nomex in key areas for mobility Perforated knit in key areas for breathability Designed for comfort in a driving position Minimal external seams increase driver comfort X-Cool Silver draws heat from the skin to cool the driver X-Cool Silver has anti-bacterial effect Available in white or black SPARCO RW-9 UNDERLAYER SIZE CHART

Sparco Shield Tech Nomex Balaclava The Shield Tech line of Nomex undergarments provides the highest level of protection and technology for comfort and breathability. The Shield Tech is homologated to the newest FIA standard 8856-2018 which provides the highest fire protection. When designing this new line of undergarments, Sparco studied the drivers seating position to ensure ultimate fit and comfort. Strategic weaving of the material produces increased breathability along with articulation. Shield Tech uses a seamless construction with ultra-soft stretchable material. There are two different woven materials in key areas; thin stretch for comfort and mobility as well as a double perforated panels for increased breathability. The minimal seams are stitched flat with thin specialized thread for added comfort. All Shield Tech pieces are treated with Sparco’s X-Cool treatment, which draws heat from the body surface to cool the driver. In addition to cooling the driver, X-Cool treatment has an anti-bacterial effect. HOOD SHIELD TECH The Shield Tech balaclava (hood) was designed with no seams across the mouth and chin area for comfort when wearing a helmet. The traditional center seam across the front of the forehead has been moved to a side seam to lessen any chances of pressure when wearing a helmet. Available in black or white. TECHNOLOGY Newest FIA rating, FIA 8856-2021 Seamless stretchable Nomex in key areas for mobility Perforated knit in key areas for breathability Designed for comfort in a driving position Minimal external seams increase driver comfort X-Cool Silver draws heat from the skin to cool the driver X-Cool Silver has anti-bacterial effect

Sparco 90° Aluminum Seat Side Mount Brackets Sparco 90o aluminum side mounts are used to mount competition seats. Side mounts have mutliple side holes that provide a customizable mounting position. All-aluminum construction available in powder coated black only. The 90o aluminum side mount is ideal for vehicle applications that have limited room for seat mounting. The smaller footprint allows for more mounting options. Sparco 90o Side Mount Details: Powder coated for superior protection Weight 2.5 lbs (1.1kg) per set

Sparco Aluminum Side Mount Seat Brackets Sparco side mounts are used to mount competition seats. Side mounts have multiple side holes that provide a customizable mounting position. FEATURES All aluminum construction Powder coated for superior protection Weight 2.5 lbs per set

Sparco HD Aluminum Side Mount Seat Brackets Far and away our most popular side mount seat bracket, the Sparco HD Aluminum seat mounts have multiple side holes that provide a customizable mounting position. The HD Aluminum side mounts have an added benefit of being able to mount in either direction with the legs facing in or out giving you more vehicle mounting options. These HD side mounts are larger than the standard Sparco aluminum side mount. All aluminum construction available in anodized silver only. Sparco HD Aluminum Side Mount Details: Multiple mounting positions Anodized for superior protection Reverse mount option Weight 3.4 lbs (1.5 kg) per set

Sparco Steel Side Mount Seat Brackets These Sparco steel side mount seat brackets have mutliple holes that provide a customizable mounting position. Sparco Steel Side Mount Details: Powder coated steel in black Weight: 5.0 lbs (2.3 kg) per set

Sparco Adjustable Steel Side Mount Seat Brackets Sparco steel side mounting frames with separate adjustable side plates offer the ultimate adjustability. The main pressed steel rails are 580mm long to enable multiple mounting positions for greater adapatability both for the seat and proper fitment to the vehicle. The multi-drilled design guarantees the correct driving position while ensuring complete safety and ease of fitting. The lightweight medium height bracket design is suitable for all Sparco side mounted motorsport and performance road seats. The Sparco Adjustable Steel Side Mount is FIA certified.

Sparco Sky RF-7W Carbon SA2020 The Sparco Sky RF-7W has a carbon fiber outer shell reinforced with layers of carbon-kevlar composite. The RF-7W Carbon includes a wider eye opening making it ideal for both open-wheel and closed-cockpit racing. Multiple exterior vents increase air circulation throughout a redesigned interior. Integrated channels not only direct cool air onto the driver's head, some also route air towards the visor reducing the chance of fogging. The Sparco Sky RF-7W Carbon has removable, washable interior padding that's easy to reposition for a customized, comfortable fit. All interior seams have been removed from areas where pressure is exerted on the head. The Sparco Sky RF-7W has been designed to accommodate a drink tube and an intercom system (each sold separately). Available in sizes X-Small to X-Large (including new Medium/Large size using Sparco's smaller, lighter shell) with a red or black interior. The Sparco Sky RF-7W Carbon Fiber has HANS posts pre-installed and is both Snell SA2020 and FIA 8859-2015 approved. Additional Sparco Sky RF-7W Carbon Fiber helmet shields available here. Sparco Sky RF-7W Carbon Fiber Helmet Details: Snell SA2020 and FIA 8859-2015 certified Wind tunnel optimized venting with anti-fog air channels Lightweight carbon fiber with carbon-kevlar base layers Choose red or black interior lining color Removable, washable lining Pre-molded interior to accommodate drink tube and intercom system (sold separately) New "Medium/Large" size uses Sparco's lighter and more compact shell HANS posts pre-installed Anodized aluminum chin strap hardware How To Measure Your Head Properly The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

Sparco SPX Reclining Seat (non-FIA) The SPX is handcrafted in Italy using the same technology and materials used for OEM super cars. In fact, the SPX is the first carbon fiber reclining seat available to the public that meets the same specifications required by the OEM manufacturers. What this means is that the attention to detail and quality put into the SPX cannot be matched by any other seat manufacturer on the market today. The Sparco SPX seat represents the ultimate evolution of the sport seat. The SPX uses a combination of carbon fiber and advanced composites that give the driver both comfort and performance in a lightweight package. With the ergonomic shape of the carbon fiber backrest and the seating position of the RTM composite lower, the SPX holds the driver during extreme lateral forces and is comfortable for long road trips. The SPX is covered in a combination of beautiful perforated and smooth Italian leather. The center of the SPX is covered in Alcantara suede to allow you to gain absolute control of your vehicle and enhance your driving experience. To finish off the performance look, all hand stitching is done in tone-on-tone black with the Sparco logo embroidered in matching black. The gloss finished carbon fiber backrest features a leather pull strap which releases the backrest to fold forward to allow access to a backseat or storage area. The backrest also features a micro adjustment knob that allows you to dial in the perfect driving position. The SPX is sold in driver and passenger versions (left and right). TECHNOLOGY Lightest carbon fiber reclining seat on the market Gloss carbon fiber back rest RTM composite lower (an advanced composite with strength and weight similar to carbon fiber) Covered in hand-stitched Italian leather and Alcantara suede Leather pull for seat back release Sold in driver (left) and passenger (right) versions SPX DIMENSIONS A LITTLE HISTORY Sparco has designed and engineered some of the most advanced sport seats in the world, including the first-ever adjustable carbon fiber seat in 1998 for the Lamborghini Diablo. Since then, countless super cars such as the Bugatti Veyron and Lamborghini Aventador have used Sparco design and technology in their vehicles. In addition to seats, Sparco also produces carbon fiber body panels, bumpers, roofs and aerodynamic pieces, in addition to structural carbon fiber parts like stressed-member engine cradles and other chassis parts. Supplying OEM manufacturers requires every part to pass demanding safety and durability tests. Sparco’s extensive expertise in carbon fiber technology is why they're a Tier One supplier for Alfa Romeo, AMG, Aston Martin, Audi, Bentley, Bugatti, Ferrari, Koenigsegg, Lamborghini and Lotus to name a few.

Sparco Stealth Front Spoiler The Sparco STEALTH Front Spoiler is a high-performance aerodynamic upgrade designed for Sparco’s STEALTH RF series helmets. Developed through wind tunnel testing, this spoiler enhances helmet stability at high speeds by reducing lift and improving airflow efficiency—helping drivers stay focused and in control, even in the most demanding racing conditions. Aerodynamic Precision for Peak Helmet Stability Crafted from lightweight, durable materials, the Sparco STEALTH Front Spoiler integrates seamlessly with the helmet’s profile. It minimizes buffeting and turbulence, improving downforce and reducing fatigue during long stints. Whether you’re on a road course, oval, or endurance circuit, this spoiler delivers a measurable performance advantage and a professional-grade look. Features • Designed exclusively for Sparco STEALTH RF helmets• Reduces aerodynamic lift and helmet movement• Lightweight, high-strength polymer construction• Wind tunnel tested for maximum stability• Improves airflow and reduces neck strain• Easy to install with included adhesive backing• Clear finish for a seamless OEM appearance Sparco STEALTH Front Spoiler FAQs: What helmets are compatible with this spoiler? The Sparco STEALTH Front Spoiler is engineered for Sparco STEALTH RF helmets and fits perfectly with the helmet’s factory contour. Does the spoiler really make a difference at speed? Yes. The aerodynamic design significantly reduces helmet lift and buffeting at higher speeds, increasing driver comfort and stability. Is this spoiler available in different colors? The spoiler is available in a clear finish to maintain the helmet’s sleek, factory appearance and comply with most racing series requirements. How do I install the Sparco STEALTH Front Spoiler? Installation is quick—simply clean the helmet surface, align the spoiler, and apply the adhesive backing. No drilling or permanent modification is required. Is this spoiler FIA-approved? The spoiler is an OEM Sparco accessory and designed to maintain compliance with helmet homologation standards when properly installed. Enhance your aerodynamics and professional edge with the Sparco STEALTH Front Spoiler—precision-built to keep you stable, streamlined, and race-ready at every turn.

Sparco Stealth Rear Spoiler The Sparco Stealth Rear Spoiler is a professional-grade aerodynamic upgrade engineered to improve helmet balance, airflow, and high-speed stability. Designed for Sparco Stealth RF helmets, this spoiler helps reduce drag and lift while enhancing downforce—keeping your head steady and focused during long, high-speed runs. Optimized Downforce and Aerodynamic Control Built from lightweight, high-strength polymer, the Sparco Stealth Rear Spoiler integrates perfectly with the helmet’s rear contour for a factory-fit appearance. Developed through aerodynamic testing, this spoiler channels airflow cleanly over the helmet to minimize turbulence and improve performance under racing conditions. Features • Precision-fit for Sparco Stealth RF series helmets• Improves aerodynamic efficiency and stability• Reduces drag and lift at high speeds• Lightweight and durable clear polymer construction• Wind tunnel tested for maximum balance• Includes adhesive backing for easy, no-drill installation• OEM Sparco accessory for factory-quality integration Sparco STEALTH Rear Spoiler FAQs: Which helmets does the rear spoiler fit? The Sparco Stealth Rear Spoiler is specifically designed for the Sparco Stealth RF helmet lineup and integrates perfectly with its aerodynamic shell shape. How does the rear spoiler improve performance? The spoiler reduces turbulence and increases rear downforce, enhancing helmet stability and comfort at racing speeds. Is installation permanent? No. The spoiler attaches using high-quality adhesive tape, allowing secure mounting without drilling or structural modification. Can I use both the front and rear spoilers together? Yes. Installing both provides the most balanced aerodynamic profile, reducing lift and improving stability across a range of speeds. Does the spoiler affect helmet certification? No. The rear spoiler is a Sparco OEM accessory designed to work within homologation tolerances when correctly installed. Maximize aerodynamic performance and maintain professional-level stability with the Sparco STEALTH Rear Spoiler—crafted to deliver precision airflow control for racers who demand every advantage.

Sparco Stealth RF Carbon SA2025/FIA 8859-2024 The Sparco Stealth RF Carbon Helmet is built for racers who demand elite protection and comfort at the highest levels of motorsport. With a lightweight carbon fiber shell that exceeds the newest FIA 8859-2024 and Snell SA2025 standards, it delivers unmatched strength and energy absorption without the bulk. Sparco’s advanced ventilation system keeps you cool under pressure, while the fire-retardant, removable linings ensure lasting comfort throughout endurance sessions. Every detail of this helmet is engineered to perform—ready to race straight out of the box with factory-installed HANS/FHR posts. Pure Carbon Performance. Pure Racing Focus. SPARCO STEATH RF CARBON FIBER HELMET FEATURES Lightweight Carbon Fiber Shell: Constructed from ultra-strong carbon fiber to minimize neck fatigue and maximize protection while maintaining an optimal weight balance. Efficient Ventilation System: Multiple air intakes on the chin bar and top, combined with rear exhaust ports, help regulate airflow and reduce heat build-up during long stints. Removable Fire-Retardant Linings: Easily removable and washable interior linings keep your helmet fresh and race-ready. Optional Drink System Compatibility: Integrated ports make it simple to connect an optional hydration system for endurance events. 3-Position Adjustable Visor: Adjustable visor positions provide tailored airflow and visibility for varying track conditions. Central Locking Visor Mechanism: The secure locking system ensures a firm seal and reliability at high speeds. Factory-Fitted FHR Posts: Supplied ready for HANS/FHR use, meeting professional racing safety standards. Dual Shell Sizes: Available in two shell sizes for precise fit and comfort. Seven Size Options: Covers a wide range of head sizes to achieve a perfect racing fit. Certifications: FIA 8859-2024 and Snell SA2025 approved for use in professional and amateur motorsport worldwide. SPARCO STEATH RF CARBON FIBER HELMET SIZE CHART SPARCO STEATH RF CARBON FIBER HELMET FAQs Is the Sparco Stealth RF Carbon legal for FIA-sanctioned events? Yes, it meets FIA 8859-2024 and Snell SA2025 standards, making it approved for all major motorsport disciplines. Does this helmet include HANS posts? Yes, it comes pre-installed with factory-fitted FHR (HANS) posts, ready for immediate use. What sizes are available? The Stealth RF Carbon is offered in seven sizes across two shell molds, ensuring optimal comfort and fit. Can I add a drink system? Yes, the helmet is pre-configured for an optional drink system setup, ideal for endurance and GT racing. How do I clean the interior? The interior fire-retardant linings are removable and washable, allowing easy maintenance between races. Take your racing experience to the next level with the Sparco Stealth RF Carbon Helmet — precision-built for uncompromised safety, cooling, and performance lap after lap.