CMS Brand

Adjustable Sway Bar Kit for Porsche 981/718 Cayman & Boxster These Sway Bars Fit the Following Cars: Porsche 981/718 Cayman and Boxster Porsche 981/718 Cayman S and Boxster S Porsche 981/718 Cayman GTS and Boxster GTS Porsche 981/718 Boxster Spyder Porsche 981/718 Cayman GT4 Porsche 718 Cayman GT4RS Check out installation instructions here The Best Suspension Mod Available for the Porsche 981 and 718 Through extensive research and track testing, CMS has engineered the perfect replacement sway bars for the Porsche 981 & 718 Cayman/Boxster (all models) 1. Our engineers took hundreds of laps at racetracks from Road America to COTA, Mid Ohio to High Plains, along with thousands of miles on the street. All to confirm the CMS Performance Sway Bars transform the handling of the Porsche while maintaining the car's everyday driveability and reliability. Tuned to work with your Porsche's OEM struts and springs (both standard and PASM), the CMS Sway Bars are the best handling improvement you can make to your 981. Based on the sway bars of the GT4, the CMS Performance Sway Bars have five holes of adjustment both front and rear, giving you an unprecedented range within which to tune your car's handling depending on the road or track you're tackling. Larger Diameter Plus Fine-Tuning Your Porsche's Handling With larger diameters than the OEM GT4 bars, the CMS Performance Adjustable Sway Bars can be adjusted from slightly softer than stock to substantially stiffer. This lets you fine-tune handling balance from understeer to neutral to oversteer with simple hand tools. Included are OEM Porsche sway bar bushings, precision-machined for the slightly larger bars, giving you worry-free fitment, OEM quality, and a noise-free installation. CMS Performance Sway Bars are engineered and manufactured in the USA with drop-forged ends for high strength and performance. Original Cayman GT4 and Boxster Spyder drop links, both front and rear, work perfectly with CMS Performance Sway Bars; no need to replace them. Base, S, GTS models require CMS front drop links (choose from the options above). These are OEM Porsche front links customized to fit the CMS front sway bar. Your original rear drop links do not need to be replaced. CMS Performance Adjustable Sway Bars Details: Diameters of 31.8mm (front) and 25.4mm (rear), 30% larger than the OEM 981 Cayman GT4 bars Adjustment of each bar goes from 1% softer than stock to 50% stiffer. Powder-coated Black, Red, Yellow, or Silver for long life and great looks Designed and manufactured in the USA using all US components Engineered specifically for the Porsche 981 and 718 chassis Adjustable Sway Bar Kit Includes the Following: Front and rear five-way-adjustable sway bars w/ forged ends OEM Porsche bushings custom-machined to our specifications Optional: OEM Porsche front drop link set, customized to our specification (required for Base, S, GTS)

Competition Motorsport Titanium Wheel Lug Bolts for BMW Fits All Modern BMWs Using 12x1.50 or 14x1.25 Threaded Lug Bolts Competition Motorsport Titanium Lug Bolts come in sets of 10 for your BMW. They are machined from aerospace-grade Ti-6Al-4V titanium alloy for superior strength exceptionally light weight (45% lighter than high-strength steel). Competition Motorsport Titanium Lug Bolts feature rolled threads -- never cut -- for for superior strength, precision, and durability. Titanium Bolts In OEM and Plus Lengths For Wheel Spacers OEM lengths are used for cars with no added wheel spacers. Longer sizes are available for those using wheel spacers. Just choose the thickness of your spacers and we'll size the appropriate titanium lug bolts. Features and Specs of Competition Motorsport Titanium Lug Bolts Grade 5 Ti-6AL-4V Titanium Alloy: Yield Strength: 128,000 psi Ultimate Tensile Strength: 138,000 psi Shear Strength: 79,800 psi Density: 0.160 lb/in3 Extremely high resistance to corrosion Low heat conductivity. NOTE Competition Motorsport Titanium Lug Bolts for BMW are sold in sets of ten (10) lug bolts. Two sets of lug bolts are required for one complete car.

Competition Motorsport Titanium Wheel Lug Bolts for Ferrari Priced and sold in sets of ten wheel lug bolts. These Wheel Lug Bolts Fit The Following Cars: Ferrari 458 (2009-2015) Ferrari 488 (2015-2019) Ferrari F8 (2019+) Ferrari FF (2011-2016) Ferrari California (2008-2017) Ferrari F12 (2012-2017) Ferrari 812 Superfast/GTS (2017+) Ferrari GTC4 Lusso (2016-2020) The Best, Strongest Lug Bolts For Modern Ferraris This titanium lug bolt set from Competition Motorsport is designed and manufactured specifically for your Ferrari. Each bolt is machined from aerospace-grade Ti-6Al-4V titanium alloy for superior strength and extraordinarily light weight (half the weight of high-strength steel). Competition Motorsport Titanium Lug Bolts feature rolled threads -- never cut -- for maximum strength, precision, and durability. Custom Bolt Lengths Available For Wheel Spacers Competition Motorsport Titanium Lug Bolts come in both OEM length and longer lengths if you are using wheel spacers Specifications of Competition Motorsport Titanium Lug Bolts Grade 5 Ti-6AL-4V Titanium Alloy Yield Strength: 128,000 psi Ultimate Tensile Strength: 138,000 psi Shear Strength: 79,800 psi Density: 0.160 lb/in3 Extremely high resistance to corrosion and low heat conductivity. NOTE This is one set of 10 lug bolts. Two sets are required for one complete car.

CMS Master "OFF" Decal Our CMS Master "OFF" Decal meets the standards of NASA, SCCA and IMSA for the "international marking of a spark in a blue triangle" to mark your vehicle's kill switch location. 3.375" by 2" wide Die-cut vinyl decal

CMS Fire Extinguisher Decal Our CMS Fire Extinguisher Decal meets the standards of NASA, SCCA and IMSA for marking your fire system actuator location. 3" diameter Die-cut vinyl decal

CMS Tow Decal All professional sanctioning bodies require tow hooks on race cars if the roll cage is not easily accessible, and the tow hooks must be clearly marked for quick identification by safety crews. 3" by 2" Die-cut vinyl decal

CMS Transponder Decal with Write-On Area Some sanctioning bodies require this decal to mark the location of your transponder. Our 3 inch diameter red-on-white "T" decal has a special area for you to write in your transponder number, if desired. Just write your transponder number using a ball point pen or Sharpie and you're good to go. Make sure the ink is waterproof if the decal will be exposed to the elements. If in doubt, we suggest you protect the write-on area with clear tape to keep the transponder number from smearing or washing away. 3" diameter Die-cut vinyl decal

REPLACEMENT BUSHINGS ONLY