Camaro SS 1LE (Gen 6)

Pagid Racing Brake Pads No. 8208 Fits the Following Vehicles Make Model  Years Front Rear Chevrolet Camaro SS [Gen 6] 4-piston Brembo caliper 2016 -     X Chevrolet Camaro SS [Gen 6] 6-piston Brembo caliper - upgrade kit 2016 -     X Chevrolet Camaro SS 1LE [Gen 6] 6-piston Brembo 2016 -     X Chevrolet Camaro GT4 R [race car] 2017 -     X Chevrolet Corvette C7 base 2013 - 20     X Chevrolet Corvette C7 Z06 [iron brakes] 2015 -     X Chevrolet Corvette C7 Z51 2014 -     X Ford Mustang Shelby GT350 [6-piston Brembo caliper / 15.5-inch rotor] 2015 -     X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 19-5 Compound: Pagid RSL 19-5 has a slightly higher and more aggressive coefficient of friction and a stronger initial bite compared to RSL 19. Often used on the rear axle of heavier GT3 and GTE cars to fine-tune brake bias. It can also be used on the front of lighter cars for a more aggressive feel than RSL 19. Pagid RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear.

Pagid Racing Brake Pad Shape No. 8081 Fits the Following Vehicles: Make Model Build (Year) Front Rear Aston Martin DB11 [iron brakes] 16 - 23 X Aston Martin Vantage [iron brakes] street car 18 - X Audi RS6 [C6] 08 - 10 X Cadillac CTS-V [6-piston front caliper] 10 - 14 X Chevrolet Camaro SS [Gen 6] 6-piston Brembo calipers 16 - X Chevrolet Camaro ZL1 [Gen 5] 12 - 15 X Chevrolet Camaro SS 1LE [Gen 6] 6-piston Brembo calipers 16 - X Chevrolet Corvette C7 Z06 [iron brakes] 15 - X Chevrolet Corvette C8 Z06 [iron brakes] 23 - X Mercedes C 63 AMG [W204] 08 - 14 X Mercedes CLK 63 AMG Black Series 06 - 09 X Nissan R35 GT-R 08 - X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 29 Compound: Pagid RS 14 Compound: The Pagid RS 14 (Black) is a high friction value ceramic compound with very good modulation and high fade resistance. A very popular, aggressive pad with strong initial bite and high torque. In addition to the track-day environment, RS14 has shown success in short- to medium-distance circuit racing as well as gravel and tarmac rallying. The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSL 1 Compound: Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RSC 1 Compound (Ceramic Rotors Only): A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid RST 1 Compound: Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.

Girodisc Brake Pad Spreader This indispensable tool is used by race teams, shops, and enthusiasts alike who have high performance four- and six-piston calipers. The spreader is designed to spread brake pads and pistons in four- and six-piston calipers to facilitate quick replacement of pads and/or rotors in a shop or racing environment.No more screwdrivers, pliers, hammers, or C-clamps! This tool will retract the pistons evenly and all the way back into their bores with one squeeze of the levers. The Girodisc spreader was designed around popular four-piston and six-piston calipers from Brembo, AP Racing, Alcon, and other performance calipers in racing and road use. To help fit in any caliper, the amount of throw is adjustable.Insert the spreading plates one way for wider six-piston calipers, then turn the spreader 90o and use the plate sides for four-piston calipers.The Girodisc Pad Spreader is made from heavy-gauge steel and is powder-coated for durability. The slider is cadmium-plated, and nylon pivot bushings ensure smooth action. The Girodisc Pad Spreader will quickly become an invaluable tool for any race team, shop, or enthusiast who changes pads and rotors with any frequency.