Sparco

Thunderhill Racing Seat Mounting Hardware Kit Complete Mounting Kit Includes: Four (4) 8x1.25 25mm Bolts Four (4) 8x1.25 20mm Bolts Four (4) 8x1.25 Locking Nuts Eight (8) Washers (Sparco Part Numbers 50001 and 50002, everything you need in one place.)

Sparco 2 Inch Alcantara Harness Pads Special memory foam harness shoulder pads covered in Alcantara suede with embroidered Sparco logo. FEATURES: Memory foam for amazing comfort. Alcantara stays in place, wears well. For use with 2-inch racing harnesses. Includes two harness pads per package.

Sparco 4 Point Racing Harness (3" Steel) Strap In and Level Up Your Ride with the Sparco 4 Point Racing Harness! The Sparco 4 Point Racing Harness is here to redefine your driving experience, turning every ride into a secure, race-ready adventure. And no, we're not just pulling your leg... or should we say, your lap belt?Why the Sparco Harness is the Co-Pilot You Didn't Know You Needed:Unity in Safety: Designed to work in perfect harmony with Sparco's competition seats, this harness doesn't just keep you in place; it becomes one with your racing setup. It's like finding the peanut butter to your jelly.Quality that Speaks Volumes: Crafted from top-notch fabric and boasting durable fasteners, this harness ensures that once you're strapped in, you're in for a secure and comfy ride. No more wiggling around trying to find that sweet spot!A Perfect Fit: With 2-inch lap and 3-inch shoulder straps, this 4-point masterpiece offers a snug embrace. And thanks to the aircraft-quality quick-release buckle with integrated anti-submarine belts, getting in and out is a breeze—no advanced engineering degree required.Smooth Operator: The lightweight steel adjusters are like butter, making tensioning smooth and clamping just perfect. Because who has time for complicated adjustments when the track is calling?Snap to It: Each belt comes with snap-on fixings, making installation a snap (pun intended). And since they're FIA approved, you can hit the track with confidence, knowing you're as safe as can be.Tech Specs to Impress:Lap of Luxury: 2" lap belts for that just-right fit.Shoulder the Load: 3" shoulder straps to keep you snug without the hug-too-tight feel.Pull for Power: Pull-up lap belts for on-the-fly adjustments.Smooth Moves: Lightweight steel adjusters for that seamless tensioning.Snap Happy: Snap-in Kit Mounting included because who doesn't love convenience?Seal of Approval: FIA Approved, because your safety is non-negotiable.Imagine hitting those corners with the confidence of a pro, strapped in securely, focused on the finish line, not on your seatbelt. That's what the Sparco 4 Point Racing Harness brings to the table—or should we say, to the driver's seat.Grab your Sparco 4 Point Racing Harness now and transform every drive into a track-worthy triumph! Sparco’s full line of harnesses works in unity with our competition seats. Crafted from high-quality fabric and fitted with durable fasteners, each harness restrains the body for added safety and protection. The 4-point harness features 2-inch lap and 3-inch shoulder straps that attach in the center using an aircraft-quality quick-release buckle with integrated anti-submarine belts. The lightweight steel adjusters allow for smooth, quick adjustments and perfect clamping. Each belt attaches to the frame using snap-on fixings. Available in pull up only. TECHNOLOGY 2" lap and 3" shoulder straps Pull-Up lap belts Light-weight steel adjuster for smooth and quick tensioning Snap-in Kit Mounting included FIA Approved

Sparco 6 Point Racing Harness (3" Steel) Sparco’s full line of harnesses works in unity with our competition seats. Crafted from high-quality fabric and fitted with durable fasteners, each harness restrains the body for added safety and protection. Our 6-point harness features 3-inch lap and shoulder straps that attach in the center using an aircraft-quality quick-release buckle with integrated anti-submarine belts. The lightweight steel adjusters allow for smooth, quick adjustments and perfect clamping. Each belt attaches to the frame using snap-on fixings. Available in pull up only. TECHNOLOGY 3" lap and shoulder straps Pull-Up lap belts Light-weight steel adjuster for smooth and quick tensioning Snap-in Kit Mounting included FIA Approved

Sparco 6 Point Racing Harness 2"/3" HANS SHOULDER BELTS W/ ALUMINUM ADJUSTERS Sparco’s full line of harnesses works in unity with our competition seats. Crafted from high-quality fabric and fitted with durable fasteners, each harness restrains the body for added safety and protection. Sparco's 6-point HANS-compatible harness features 3-inch lap straps and shoulder straps that taper from 3 inches to 2 inches. This tapered design allows for the integration of a HANS device. Each strap attaches in the center using an aircraft-quality quick-release buckle with integrated anti-submarine belts. The lightweight aluminum adjusters allow for smooth, quick adjustments and perfect clamping. Shoulder and sub belts attach to your car or seat mounts using snap-on fixings and caribiner fasteners for lap belts. This harness is FIA approved. TECHNOLOGY 3" lap belt 3" tapered to 2" shoulder straps Light-weight carabiner fasteners for lap belts Pull-Up lap belts Light-weight aluminum adjuster for smooth and quick tensioning Snap-in Kit Mounting included FIA Approved Available in black, blue, or red.

The Sparco ADV Elite is an extremely strong, ultra-light weight carbon fiber seat designed to pass the FIA’s highest seat rating FIA 8862-2009. This means that the ADV Elite has been tested to an impact of approximately 70G. This rating is required for WRC racing, and the ADV Elite was specially designed with an upright driving position preferred by rally drivers. In addition to the Sparco ADV Elite's rally driving position, the outer dimensions have been reduced to fit into typically smaller WRC cockpits. With strength at the top of its class, the ADV Elite can withstand over 6,600 lbs. of lateral force. The ADV Elite has an energy absorbing system in the areas subjected to the highest stress to protect the driver. The entire seat is covered in self-extinguishing fabric and special non-slip fabric in the shoulders and seat area. Sparco ADV Elite Carbon Racing Seat Details: Ultra-light weight Carbon Fiber construction FIA 8862-2009 approved Testing to an impact of 70G Designed for WRC Rally cockpits & driver position Hans device compatible Fire retardant fabric Special non-slip fabric Racing Seat Dimensions:

Sparco ADV XT Carbon Racing Seat The Sparco ADV XT is an extremely strong, ultra-light weight carbon fiber seat designed to pass the FIA’s highest seat rating, FIA 8862-2009. This means the Sparco ADV XT has been tested to an impact of approximately 70G. This rating is required for GT racing, and the ADV XT was specially designed with a more relaxed, comfortable driving position for GT cockpits. With strength at the top of its class, the ADV XT can withstand over 6,600 lbs. of lateral force. The ADV XT has an energy absorbing system in the areas subjected to the highest stress to protect the driver. The entire seat is covered in self-extinguishing fabric, plus a special non-slip fabric in the shoulders and seat area. The Sparco ADV XT is FIA approved when installed with Sparco 004902 side-mount brackets. Sparco ADV XT Carbon Racing Seat Details: Ultra-light weight carbon fiber construction FIA 8862-2009 approved Tested to an impact of 70G Designed for GT cockpits with more relaxed driver position HANS device compatible Fire retardant fabric Special non-slip fabric Racing Seat Dimensions:

Sparco Air Pro RF-5W: Retro Inspired From 1977 The Air Pro RF-5W 1977 is a painted version of the Sparco Air Pro RF-5W. This retro inspired helmet has a white base with blue or red stripes beneath a durable clear coat finish. The Sparco Air Pro RF-5W 1977 features a carbon-kevlar and fiberglass construction with a wider eye opening that can be used for open wheel or closed cockpit driving. Multiple exterior vents increase air circulation throughout a redesigned interior. This interior has channels that cool the driver, plus additional channels routing air towards the visor to reduce the chance of visor fogging. The Sparco Air Pro RF-5W 1977 has removable, washable padding that can be repositioned for a comfortably personalized fit. All interior seams have been removed from areas where greater pressure is exerted on the head. The Air Pro RF-5W 1977 has been designed to accommodate a drink tube and an intercom system (both sold separately). Available in white with blue or red stripes, the Sparco Air Pro RF-5W 1977 has HANS posts pre-installed. Snell SA2020 and FIA 8859-2015 approved. Sparco Racing Helmets History of Innovation and Excellence Today's Sparco auto racing helmet line is the result of over 40 years of research and development experience, including wind tunnel testing. The new range was designed to meet the requirements of both Snell SA2020 and FIA 8859-2015 ratings. To meet these requirements Sparco introduced new innovations for driver safety and comfort. All auto racing shells now have layers of Carbon-Kevlar for greater strength. Sparco helmets have been wind-tunnel tested to maximize exterior vent placement and air flow. The EPS interiors and padding have also been redesigned for increased air flow and driver comfort. Sparco also introduced a new size: Medium/Large. This M/L size takes advantage of using the smaller helmet shell which is lighter and more compact. Sparco Air Pro RF-5W 1977 Auto Racing Helmet Details: Manufacturer: Sparco Manufacturer part no.: 003375 Snell SA2020 and FIA 8859-2015 approved Painted retro design in either red or blue Lightweight carbon-kevlar/fiberglass construction Pre-molded interior to accommodate accessories like drink tubes and an intercom system (accessories sold separately) New Medium/Large size uses lighter, more compact shell Anodized aluminum chin strap hardware Removable, washable lining Wind tunnel optimized venting with anti-fog air channels Additional Sparco RF-5W Pro helmet shields available here. Sparco Air Pro RF-5W 1977 Auto Racing Helmet Sizes: 54cm (X-Small)) 55-56cm (Small) 57-58cm (Medium)) 59cm (Medium/Large)) 60cm (Large)) 61cm (X-Large)) 62cm (XX-Large)) Proper Helmet Fitment and Head Measurement The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

Sparco Air Pro RF-5W Auto Racing Helmet The current Sparco auto racing helmet line is a result of over 40 years of research and development experience, including wind tunnel testing and work with some of history's great racing teams. Sparco's latest Air Pro RF-5W helmet lineup was designed specifically to meet the requirements of the Snell SA2020 and FIA 8859-2015 ratings. Sparco has introduced several innovations for driver safety and comfort. All shells now have layers of carbon-kevlar for increased strength without added weight. The helmets have been wind-tunnel tested to optimize exterior vent placement and air flow. And new EPS interiors and padding were redesigned for increased airflow and driver comfort. Sparco also introduced a new Medium/Large helmet size taking advantage of their smaller, lighter, more compact shell. Check out Sparco Air Pro RF-5W helmet shields here. Sparco Air Pro RF-5W Auto Racing Helmet Details: Manufacturer: Sparco Manufacturer part no.: 003375 Snell SA2020 and FIA 8859-2015 approved Lightweight carbon-kevlar/fiberglass construction Wind tunnel optimized venting with anti-fog air channels New "Medium/Large" size uses lighter, more compact shell Anodized aluminum chin strap hardware Removable, washable lining Pre-molded interior accepts drink tubes and intercom system (sold separately) Sparco Air Pro RF-5W Helmet Colors & Sizes: 54cm (X-Small) to 62cm (XX-Large) Gloss White or Matte Black The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

The Sparco Air Pro RF-5W Martini: Spectacular Limited Edition Featuring a Beautiful Martini Racing Paint Livery With its strong carbon-kevlar reinforced fiberglass shell, the Sparco RF-5W Martini Racing helmet provides superior levels of comfort and safety. The Martini Racing livery takes the design of this phenomenal helmet to the next level. As a limited-edition Sparco exclusive, this helmet sets itself apart from any other in the paddock. Inside the helmet, the EPS padding and linings can be removed for washing, and can be re-positioned for more personalized fit and comfort. The helmet features exceptional ventilation with grilles on the front chin bar and six ducts on the top and back, keeping the driver cool and dry in the heat of racing. The RF-5W can also accommodate a drinking/hydration system. The visor features a center-positioned locking tab with a continual adjustment. Available in two different shell sizes (one for Small to Medium/Large, another for Large to XX-Large) in order to get you the perfect fit. The Air Pro RF-5W Martini Racing helmet is supplied with factory-fitted FHR/HANS posts. The Sparco Air Pro RF-5W is FIA 8859-2015 and Snell SA2015 approved. Sparco Air Pro RF-5W Martini Racing Helmet Details: Limited edition Martini Racing color scheme Strong and lightweight Carbon Kevlar reinforced shell Excellent ventilation to help keep you cooler and more focused FIA 8859-2015 and Snell SA2015 approved An effective helmet is one that fits properly. Have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head, starting at a point about an inch above the eyebrows and around a point in the back of the head that results in the largest measurement, finally wrapping back around to the front. It's a good idea to take a few measurements and order your helmet based on the largest. This helmet will ship with signature required for delivery.

Sparco Arm Restraints Most racing organizations require arm restraint systems for open-wheel competition. These Sparco Arm Restraints come in three colors and have padded arm bands for additional comfort. FEATURES Great for open-wheel cars Padded arm bands and steel hardware D-ring system allows you to adjust the arm band circumference for a comfortable fit Easy release allows quick entry and exit from driver's compartment Available in black, red or blue Meets SFI 3.3

Sparco Arrow Nomex Gloves The Sparco Arrow racing glove provides incredible grip and superior comfort. The palm is printed with high-grip HTX, a Sparco patented material that increases grip, comfort and dexterity. HTX is strategically placed for maximum steering feel and performance. Another Sparco-exclusive feature is Touch-S technology, a Touch Sensitive index finger and thumb. Sparco's patented fire resistant touch sensitive material allows you to use your touch screen data acquisition electronics or phone lap timer apps without taking off your gloves. The Arrow is ultra-lightweight with pre-curved fingers, external stitching and a unique inner thumb seam that gives unparalleled comfort on long stints. Available in Black/White, Black/Red, Navy, White, and Red. The Sparco Arrow is both FIA and SFI approved. TECHNOLOGY Touch Sensitive finger tips compatible with touch screen data acquisition and lap timer apps Anatomically correct seamless palm that contours to the natural shape of the hand Printed high-grip HTX palm, a Sparco-exclusive material that increases grip, comfort and dexterity External seams and unique inner thumb seam for extreme comfort FIA and SFI approved

Sparco Arrow-K Kart Racing Glove The Arrow-K is a boldly styled karting glove that provides incredible grip and superior comfort. Featuring an anatomically correct seamless palm that contours to the natural shape of the hand, the palm of the Arrow-K glove uses an Ultra Grip silicon palm that increases grip, comfort and dexterity. The Arrow-K has exclusive touch sensitive index finger and thumb for use with touch screen electronic devices such as data logging. The Arrow-K is an ultra-lightweight glove made with wear-resistant polyamide fabric with external seams for comfort. TECHNOLOGY Anatomically correct seamless palm that contours to the natural shape of the hand Touch Sensitive index and thumb for touch screen devices External seams and high contrast palm and finger grips with premium silver accents

Sparco Kart Racing Rib Carbon The Sparco Rib Carbon is the ultimate lightweight rib protector. The Rib Carbon provides protection and padding without adding bulk. It features a carbon fiber shell with Sparco Impact Technology. This technology combines proprietary 4mm EPDM material (a weather- and UV-resistant synthetic rubber) with 6mm polyurethane foam that wraps the body and provides incredible anti-vibration and shock absorption performance. The Rib Carbon features adjustable shoulder straps to ensure and maintain correct placement. TECHNOLOGY Ultra-light carbon fiber shell Sparco Impact Technology Anti-vibration and shock absorption Adjustable shoulder straps Sizes XS-XXL

Sparco Circuit Carbon Fiber Racing Seats (Circuit II QRT) - Large    Hey Speed Demons and Track Day Titans!  Get ready to buckle up in the Sparco Circuit Carbon Fiber Racing Seat (Circuit II QRT), where cutting-edge technology meets the thrill of the race. This isn't just a seat; it's your throne as you conquer the track! Why It's Not Just a Seat, It's a Game-Changer: Ultralight Pre-Preg Carbon Fiber Shell: Imagine strapping into a seat so light yet so strong, it feels like it's from the future. Thanks to aerospace-grade carbon fiber, this seat is like wearing a feather - if the feather was also indestructible. Wider is Better: The Circuit II Carbon is the Arnold Schwarzenegger of racing seats - a wider version of its sibling, ensuring that even the burliest racers up to a 36” waist fit comfortably. Safety First, But Make It Stylish: With integrated bolsters for head protection and compatibility with FHR devices, it's like having a personal bodyguard, but way cooler. Feel the Grip: High grip material in strategic places means you're glued in place, even if you're pulling Gs like you're in a fighter jet. Fire-Resistant Fabric: Because the only thing that should be on fire is your lap time. Special Non-Slip Fabric: It's like the seat is giving you a reassuring hug, saying, "I got you," as you take those corners at breakneck speeds. FIA 8859-1999 Approved: This seat doesn't just meet standards; it laps them. QRT Technology - Because Weight Matters: Developed in Sparco's top-secret Italian lab (probably next to a gelato shop), QRT technology is like alchemy for seats. It magically reduces weight by up to 30% compared to others. Lighter seat, faster you! Feel the Experience: Imagine sliding into this seat. You're not just sitting; you're being cradled by cutting-edge technology. As you grip the wheel, the non-slip fabric grips you back. You're one with the car. Each turn, each lap, you're not just driving; you're performing a high-speed ballet, and the Circuit II QRT is your dance partner. Specifications: Ultralight Pre-Preg Carbon Fiber Shell Excellent Ergonomics for Comfort and Control Fire-Retardant Fabric for Safety Special Non-Slip Fabric for Extra Grip FIA 8859-1999 Certification for Peace of Mind Large Size: Up to a 36” Waist Ready to Ride? Don't just dream about the perfect race. Live it. The Sparco Circuit Carbon Fiber Racing Seat (Circuit II QRT) is waiting for you. It's not just a seat; it's your ticket to an exhilarating racing experience.