Racetech
Racetech Steel Side Mount Brackets
$119.99
Racetech Steel Side Mounting Brackets
Racetech RTB2009S satin black powder coated 3mm steel brackets for side mounting seats. Sold as a pair. Alongside the Racetech 4100-Series seats, they have developed a classy but affordable new bracket set. A staggered hole-and-slot pattern allows fine adjustments for the optimal seating position. Slots in the foot of each bracket also allow a little more lateral tolerance during installation.
Use With These Racetech Seats:
RT4009, RT4009W
RT4009HR, RT4009WHR, RT4009WTHR
RT4100, RT4100WT, RT4100HR, RT4100WTHR
RT4119HRW, RT4119THR, RT4119WHR, RT4119WTHR
RT9119HRW, RT9119THR, RT9119WHR, RT9119WTHR
Hole Spacing (Seat):
Nominal: 295mm
Minimum: 290mm
Maximum: 300mm
Sparco
Sparco QRT Side Mount Brackets
from $150.00
Sparco QRT Side Mount Seat Brackets
Sparco QRT side mounts are specifically designed for the QRT-R and other QRT Performance seats. The QRT side mounts are designed for the unique bottom shape of QRT seats. Mutliple side holes allow your QRT seat to be mounted low in the vehicle and with the proper amount of recline or rake. Available in black.
Sparco QRT Side Mount Details:
Designed for unique QRT bottom shell shape
Allows for low mounting in vehicle and proper recline or rake
Available in steel or aluminum
Brey Krause
Brey Krause R-9052 Seat Side Mount Brackets Porsche 991 & 981
$182.47
Brey Krause R-9052 Porsche Race Seat Side Mounts
The Brey Krause R-9052 Seat Side Mount Adapters are designed to help install a multitude of side-mounting racing seats directly to the factory manual sliders1 used on many Porsche 991 and 981 cars. (Porsche OEM sliders are not included.) They also fit some later 997 & 987 Porsches equipped with similar tabbed sliders.
Porsche factory sliders are known for their quality and strength. Along with their longer travel versus aftermarket sliders, they help retain the factory feel in your car. Brey Krause's innovative design allows the side mounts to be installed in four different positions. Combined with included spacers, they are compatible with a multitude of racing seats that are between 390 and 430mm wide. Slightly slotted side-mounting holes allow for fitment to the most popular seat manufacturers (Sparco, Recaro, OMP, Cobra, and more).
The R-9052 is compatible with the Brey Krause R-9259 sub strap mount (available as an option) for use with a five- or six-point racing harness.
Brey Krause R-9052 Side Mount Bracket Details:
Made from 11-gauge T304 stainless steel
Powder-coated in satin black
Weight 5 lbs (2.3 kg)
Fits all Porsche 991 & 981 cars with OEM manual seat sliders (also fits some late 997 & 987 cars with similar tabbed sliders)
Fits side-mount racing seats between 390-430mm wide
Maintains factory seat belt mount
Download installation instructions here
1 Porsche OEM manual seat sliders (not included) are required for seat installation. The R-9052 is not compatible with Porsche power seat sliders. Not compatible with race seat sliders.
Sparco
Sparco Side Mount Brackets: 90° Aluminum
$140.00
Sparco 90° Aluminum Seat Side Mount Brackets
Sparco 90o aluminum side mounts are used to mount competition seats. Side mounts have mutliple side holes that provide a customizable mounting position. All-aluminum construction available in powder coated black only.
The 90o aluminum side mount is ideal for vehicle applications that have limited room for seat mounting. The smaller footprint allows for more mounting options.
Sparco 90o Side Mount Details:
Powder coated for superior protection
Weight 2.5 lbs (1.1kg) per set
Sabelt
Sabelt Aluminum Side Mount Brackets
from $150.00
Aluminum Racing Seat Brackets by Sabelt
Laser cut from high-strength aluminum, these lightweight seat brackets are ideal for mounting most side-mount style racing seats.
FEATURES:
5mm thick aluminum
FIA compliant
Powder coated Black
Standard Length: 15.5" long
Long Length: 19.25" long
Sabelt
Sabelt Steel Side Mount Brackets
$85.00
Sabelt Steel Side Mount Brackets
For use mounting most side mount racing seats.
FEATURES:
3mm thick
FIA compliant
Standard length
290mm (11.42-inch) bolt pattern
Painted Black
Sparco
Sparco Side Mount Brackets: Steel Adjustable
$139.00
Sparco Adjustable Steel Side Mount Seat Brackets
Sparco steel side mounting frames with separate adjustable side plates offer the ultimate adjustability. The main pressed steel rails are 580mm long to enable multiple mounting positions for greater adapatability both for the seat and proper fitment to the vehicle. The multi-drilled design guarantees the correct driving position while ensuring complete safety and ease of fitting. The lightweight medium height bracket design is suitable for all Sparco side mounted motorsport and performance road seats.
The Sparco Adjustable Steel Side Mount is FIA certified.
Sparco
Sparco Side Mount Brackets: HD Aluminum
$169.00
Sparco HD Aluminum Side Mount Seat Brackets
Far and away our most popular side mount seat bracket, the Sparco HD Aluminum seat mounts have multiple side holes that provide a customizable mounting position.
The HD Aluminum side mounts have an added benefit of being able to mount in either direction with the legs facing in or out giving you more vehicle mounting options. These HD side mounts are larger than the standard Sparco aluminum side mount. All aluminum construction available in anodized silver only.
Sparco HD Aluminum Side Mount Details:
Multiple mounting positions
Anodized for superior protection
Reverse mount option
Weight 3.4 lbs (1.5 kg) per set
Sparco
Seat Mounting Hardware Kit
$15.00
Thunderhill Racing Seat Mounting Hardware Kit
Complete Mounting Kit Includes:
Four (4) 8x1.25 25mm Bolts
Four (4) 8x1.25 20mm Bolts
Four (4) 8x1.25 Locking Nuts
Eight (8) Washers
(Sparco Part Numbers 50001 and 50002, everything you need in one place.)
Recaro
Recaro Flexible Side Mount (Standard Size)
$895.00
Recaro Flexible Side Mount (Standard Size)
This Kit Fits the Following Seats:
Recaro Pro Racer SPA
Recaro Pro Racer SPG
Recaro P1300 GT
Recaro P1300 GT LW
FIA Approved Racing Seat Flexibility
The Recaro Flexible Adapter bracket for the P 1300 GT advanced racing shell gives your Recaro full forward and backward sliding movement. The Recaro Flexible Adapter is the only FIA approved sliding mounting bracket for the Recaro racing seat. It was designed by Recaro specifically for endurance races where driver changes need to be done in seconds.
The Recaro Flexible Adaptor seat mount is among the most robustly design slider mounts we've ever seen. The Flexible Adapter mount is a reinforced side mount and slider assembly intended for professional endurance racing. This FIA-certified seat slider has extra reinforcing braces on the front and rear which eliminate a lot of the lateral movement seen in traditional, un-reinforced side mount brackets. This Recaro high strength seat slider/mount combination is just the thing to keep you planted firmly in place. Even the bright red, attention-grabbing slider hand bar is overbuilt. This slider and mount system only works with the Recaro standard-size seats. Check out the XL version here.
See the Recaro Flexible Adapter Side Mount in Action
Recaro racing seat (pictured) sold separately.
Recaro
Recaro Flexible Side Mount (XL Size)
$995.00
Recaro Flexible Side Mount for XL Size Seats
This Kit Fits the Following Seats:
Recaro Pro Racer SPA XL
Recaro Pro Racer SPG XL
FIA Approved Racing Seat Flexibility
The Recaro Flexible Adapter bracket for the P 1300 GT advanced racing shell gives your Recaro full forward and backward sliding movement. The Recaro Flexible Adapter is the only FIA approved sliding mounting bracket for the Recaro XL racing seat. It was designed by Recaro specifically for endurance races where driver changes need to be done in seconds.
The Recaro Flexible Adaptor seat mount is among the most robustly design slider mounts we've ever seen. The Flexible Adapter mount is a reinforced side mount and slider assembly intended for professional endurance racing. This FIA-certified seat slider has extra reinforcing braces on the front and rear which eliminate a lot of the lateral movement seen in traditional, un-reinforced side mount brackets. This Recaro high strength seat slider/mount combination is just the thing to keep you planted firmly in place. Even the bright red, attention-grabbing slider hand bar is overbuilt. This slider and mount system only works with the Recaro XL-size seats. Check out the standard-size version here.
See the Recaro Flexible Adapter Side Mount in Action
Recaro racing seat (pictured) sold separately.
Recaro
Recaro Steel Sidemounts (Standard Size)
$245.00
Recaro Pro Racer/Profi Steel Side Mounts (Standard Size)
This Mount Set Fits the Following Seats:
Recaro Pro Racer SPA
Recaro Pro Racer SPG
Recaro Profi SPA
Recaro Profi SPG
FIA Approved Racing Seat Flexibility
These Recaro Steel Sidemount brackets for the P 1300 GT advanced racing shell provide an FIA-approved mounting system for your Recaro Pro Racer or Profi SPA/SPG. Strong, rigid, and made specifically for your Recaro racing seat, this simple side mount system is for drivers who demand the highest quality in their safety gear.
This side mount system only works with the Recaro Pro Racer and Profi SPA/SPG standard-size seats. Check out the XL version here.
Recaro Steel Side Mount Features:
One pair of side mounts
Steel construction
FIA certified
For use with the Profi SPA/SPG and Pro Racer SPA/SPG
Recaro
Recaro Steel Sidemounts (XL Size)
$245.00
Recaro Pro Racer/Profi Steel Side Mounts (XL Size)
This Mount Set Fits the Following Seats:
Recaro Pro Racer SPA XL
Recaro Pro Racer SPG XL
Recaro Profi SPA XL
Recaro Profi SPG XL
Recaro Pole Position
FIA Approved Racing Seat Flexibility
These Recaro Steel Sidemount brackets for the P 1300 GT advanced racing shell provide an FIA-approved mounting system for your Recaro Pro Racer or Profi SPA/SPG XL, or Pole Position racing seat. Strong, rigid, and made specifically for your Recaro XL racing seat, this simple side mount system is for drivers who demand the highest quality in their safety gear.
Sold in pairs.The Recaro universal steel side mounts can be used with Recaro Pole Position, ABE, Profi XL, Pro Racer SPA XL (FIA Certified) side mounted bucket seats or most other brands as well. Check out the standard-size version here.
Recaro Steel Side Mount Features:
One pair of side mounts
Steel construction
FIA certified
For use with the Recaro Profi SPA/SPG XL, Pro Racer SPA/SPG XL, or Pole Position
Recaro
Recaro Aluminum Sidemounts (XL Size)
$295.00
Recaro Pro Racer/Profi Aluminum Side Mounts (XL Size)
This Mount Set Fits the Following Seats:
Recaro Pro Racer SPA XL
Recaro Pro Racer SPG XL
Recaro Profi SPA XL
Recaro Profi SPG XL
Recaro Pole Position
FIA Approved Racing Seat Flexibility
These Recaro Aluminum Sidemount brackets for the P 1300 GT advanced racing shell provide a lightweight, high-strength FIA-approved mounting system for your Recaro Pro Racer or Profi SPA/SPG XL, or Pole Position racing seat. Strong, rigid, and made specifically for your Recaro XL racing seat, these aluminum side mounts are for drivers who demand the highest quality in their safety gear.
Sold in pairs.The Recaro aluminum side mounts can be used with Recaro Pole Position, ABE, Profi XL, Pro Racer SPA XL (FIA Certified) side mounted bucket seats or most other brands as well.
Recaro Aluminum Side Mount Features:
One pair of side mounts
Lightweight alumium construction
FIA certified
For use with the Recaro Profi SPA/SPG XL, Pro Racer SPA/SPG XL, or Pole Position
Recaro
Recaro Pro Racer/Profi SPG & SPA 55mm Seat Cushion
$245.00
Recaro Pro Racer/Profi SPG & SPA Seat Cushion (Standard Size)
This 55mm Seat Cushion Fits the Following Seats:
Recaro Pro Racer SPA
Recaro Pro Racer SPG
Recaro Profi SPA
Recaro Profi SPG
Extra Height Seat Cushion for Customized Comfort
Recaro 55mm black velour front seat cushion for the Pro Racer and Profi SPA/SPG racing seats.
Recaro 55mm Seat Cushion Features:
One black velour cushion
55mm height
For use with the Recaro Profi SPA/SPG or Pro Racer SPA/SPG
Recaro
Recaro Sportster GT/CS/Cross Slider Track Kit
$145.00
Recaro Sportster GT/CS/Cross Slider Track Kit
Refined Elegance Matched With High Performance
These Recaro seat sliders allow you to position your Recaro Sportster GT, CS, or Cross seat for the ultimate driving experience. These sliders come without tabs and have an inside-mounted adjustment bar. They are not are FIA certified for racing.
The Recaro Sportster GT/CS/Cross Slider Track Kit is made in Germany from steel and black powder-coated for added durability.
Recaro Sportster GT/CS/Cross Slider Track Kit Features:
Universal fit
Kit includes inside adjuster bar without tabs
Fits Recaro Sportster GT, Sportster CS, and Cross Sportster CS seats
Sign Up and Save
Subscribe to our eNewsletter to learn about events near you, great deals, new products and for tips to improve your creator skills.