Sparco
Sparco Air Pro RF-5W Martini Helmet SA2020
$1,199.00
The Sparco Air Pro RF-5W Martini: Spectacular Limited Edition
Featuring a Beautiful Martini Racing Paint Livery
With its strong carbon-kevlar reinforced fiberglass shell, the Sparco RF-5W Martini Racing helmet provides superior levels of comfort and safety. The Martini Racing livery takes the design of this phenomenal helmet to the next level. As a limited-edition Sparco exclusive, this helmet sets itself apart from any other in the paddock.
Inside the helmet, the EPS padding and linings can be removed for washing, and can be re-positioned for more personalized fit and comfort. The helmet features exceptional ventilation with grilles on the front chin bar and six ducts on the top and back, keeping the driver cool and dry in the heat of racing. The RF-5W can also accommodate a drinking/hydration system. The visor features a center-positioned locking tab with a continual adjustment.
Available in two different shell sizes (one for Small to Medium/Large, another for Large to XX-Large) in order to get you the perfect fit. The Air Pro RF-5W Martini Racing helmet is supplied with factory-fitted FHR/HANS posts.
The Sparco Air Pro RF-5W is FIA 8859-2015 and Snell SA2015 approved.
Sparco Air Pro RF-5W Martini Racing Helmet Details:
Limited edition Martini Racing color scheme
Strong and lightweight Carbon Kevlar reinforced shell
Excellent ventilation to help keep you cooler and more focused
FIA 8859-2015 and Snell SA2015 approved
An effective helmet is one that fits properly. Have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head, starting at a point about an inch above the eyebrows and around a point in the back of the head that results in the largest measurement, finally wrapping back around to the front. It's a good idea to take a few measurements and order your helmet based on the largest.
This helmet will ship with signature required for delivery.
Sparco
Sparco Pro 2000 QRT Martini Racing Seat
$999.00
Sparco Pro 2000 QRT Martini Racing Seat
SIZE: Medium, up to a 34” waist (as measured)
The Pro 2000 QRT Martini Racing Edition is a limited production seat. It features the Iconic Martini Racing stripes and is available in period correct Navy or Grey. The Pro 2000 QRT Martini Edition is designed for a medium size driver with a waist size up to 34 inches. The Pro 2000 QRT Martini Edition is our deepest bolstered seat that gives excellent lateral support. It also features removable/adjustable lumbar cushions and non-slip fabric on the shoulder and bottom cushion areas for improved seat comfort.
The Pro 2000 QRT Martini Edition is made with all-new QRT Technology which results in an ultra-light shell. The shoulder harness openings have been raised and the seat area around the mid-section has been reshaped for less interference when compared to the original Pro 2000. The Pro 2000 QRT Martini Edition is a unique FIA seat as it can be bottom mounted in addition to the traditional side mounting. This gives additional installation options.
EVOLUTION OF AN ICON
The Pro 2000 QRT is an evolution of Sparco's iconic Pro 2000 seat. The Pro 2000 QRT has been upgraded with new ergonomics and technology. It is designed for a medium size driver with a waist size up to 34 inches. The Pro 2000 QRT is our deepest bolstered seat that gives excellent lateral support. It also features removable/adjustable lumbar cushions and non-slip fabric on the shoulder and bottom cushion areas for improved seat comfort. The Pro 2000 QRT is made with all-new QRT Technology which results in an ultra-light shell. The shoulder harness openings have been raised and the seat area around the mid-section has been reshaped for less interference when compared to the original Pro 2000. The Pro 2000 QRT is FIA approved.
WHAT IS QRT?
Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process based on aerospace technologies.
QRT creates an unparalleled mechanical strength-to-weight ratio, generating the lightest fiberglass composite seat shells currently on the market. In fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point.
TECHNOLOGY
QRT ultra-light fiberglass composite shell
Excellent fitment into small cockpits
Adjustable lumbar cushions
Excellent ergonomics
Fire retardant fabric
FIA approved
DIMENSIONS
Sparco
Sparco Martini Racing Replica Suit
$999.00
Sparco Martini Racing Driver Suit
In the golden years of rally racing, Sparco and Martini Racing contributed to the triumphs of the best drivers in the world. Now this partnership is renewed, and fans of the Martini Racing historical livery have access to beautiful re-creations of the original Sparco products. All reproductions have been updated with the newest Sparco technologies and carry current FIA homologations.
The Sparco Martini Racing replica suit is made with all-new lightweight three-layer fabric. It offers superior fire protection, breathability and comfort when compared to the original. The suit features iconic Martini Racing embroideries and patches to faithfully recreate the original look. The Martini Racing replica suit is made from the latest generation fabrics which offer a soft lightweight outer fabric and breathable inserts at the sides and a large lower back stretch panel for maximum comfort. It also features a light-weight zipper and collar, pre-curved arms, pockets, classic tone-on-tone box quilt stitching and the Sparco signature epaulettes. Available in sizes 48-66. FIA approved.
TECHNOLOGY AND FEATURES:
Martini Racing embroideries
Lightweight Three-layer Fabric
Pre-curved arms
Lightweight zipper and collar
Breathable stretch panels
FIA approved
Sparco
Sparco Air Pro RF-5W 1977 Helmet SA2020
$999.00
Sparco Air Pro RF-5W: Retro Inspired From 1977
The Air Pro RF-5W 1977 is a painted version of the Sparco Air Pro RF-5W. This retro inspired helmet has a white base with blue or red stripes beneath a durable clear coat finish. The Sparco Air Pro RF-5W 1977 features a carbon-kevlar and fiberglass construction with a wider eye opening that can be used for open wheel or closed cockpit driving. Multiple exterior vents increase air circulation throughout a redesigned interior. This interior has channels that cool the driver, plus additional channels routing air towards the visor to reduce the chance of visor fogging.
The Sparco Air Pro RF-5W 1977 has removable, washable padding that can be repositioned for a comfortably personalized fit. All interior seams have been removed from areas where greater pressure is exerted on the head. The Air Pro RF-5W 1977 has been designed to accommodate a drink tube and an intercom system (both sold separately).
Available in white with blue or red stripes, the Sparco Air Pro RF-5W 1977 has HANS posts pre-installed. Snell SA2020 and FIA 8859-2015 approved.
Sparco Racing Helmets History of Innovation and Excellence
Today's Sparco auto racing helmet line is the result of over 40 years of research and development experience, including wind tunnel testing. The new range was designed to meet the requirements of both Snell SA2020 and FIA 8859-2015 ratings. To meet these requirements Sparco introduced new innovations for driver safety and comfort. All auto racing shells now have layers of Carbon-Kevlar for greater strength. Sparco helmets have been wind-tunnel tested to maximize exterior vent placement and air flow. The EPS interiors and padding have also been redesigned for increased air flow and driver comfort. Sparco also introduced a new size: Medium/Large. This M/L size takes advantage of using the smaller helmet shell which is lighter and more compact.
Sparco Air Pro RF-5W 1977 Auto Racing Helmet Details:
Manufacturer: Sparco
Manufacturer part no.: 003375
Snell SA2020 and FIA 8859-2015 approved
Painted retro design in either red or blue
Lightweight carbon-kevlar/fiberglass construction
Pre-molded interior to accommodate accessories like drink tubes and an intercom system (accessories sold separately)
New Medium/Large size uses lighter, more compact shell
Anodized aluminum chin strap hardware
Removable, washable lining
Wind tunnel optimized venting with anti-fog air channels
Additional Sparco RF-5W Pro helmet shields available here.
Sparco Air Pro RF-5W 1977 Auto Racing Helmet Sizes:
54cm (X-Small))
55-56cm (Small)
57-58cm (Medium))
59cm (Medium/Large))
60cm (Large))
61cm (X-Large))
62cm (XX-Large))
Proper Helmet Fitment and Head Measurement
The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one.
This helmet will ship with signature required for delivery.
Sparco
Sparco Martini Racing Shoes
$279.00
Sparco Martini Racing Top Shoe
In the golden years of rally racing, Sparco and Martini Racing contributed to the triumphs of the best drivers in the world. Now, with this renewed partnership, fans of the Martini Racing historical livery have access to reproductions of the original Sparco products. All reproductions have been updated with the newest Sparco technologies and carry current FIA homologations.
The Sparco Martini Racing Top shoe is made with high-quality suede and is embroidered with the classic Martini Racing stripes. It offers superior fire protection, breathability and comfort when compared to the original. The Martini Racing Top shoe features a wide Velcro strap for greater ankle support and guaranteed fit and hold. The outer sole is anti-static and oil/fuel resistant and utilizes anti-slip technology for greater pedal feel. A balance point on the heel improves driving sensitivity. Available in black, blue and red in sizes from 37 to 48. The Martini Racing Top is FIA approved.
FEATURES
Martini Racing embroidery
Suede upper with adjustable ankle strap
Breathable lining
Balance point at the heel for improved comfort while driving
Sole design allows for both maximum comfort and pedal grip
Anti-static, fuel- and oil-resistant sole
FIA approved
Sparco
Sparco Martini Racing Land Nomex Glove
$139.00
Sparco Martini Racing Land Nomex Glove
In the golden years of rally racing, Sparco and Martini Racing contributed to the triumphs of the best drivers in the world. Now, with this renewed partnership, fans of the Martini Racing historical livery have access to reproductions of the original Sparco products. All reproductions have been updated with the newest Sparco technologies and carry current FIA homologations.
The Sparco Martini Racing Land glove provides excellent protection and feedback. The classic design features Martini Racing and Sparco logos in “period correct” embroidered patches. The palm features an ergonomic design with reinforced stitching that conforms to the hand’s position. The glove has anti-slip suede fingertips and provide grip and feedback. The elastic wrist and wide range of sizes helps ensure proper fitment. Colors: Navy or Red. The Martini Racing Land is FIA approved.
TECHNOLOGY
Period-correct embroidered Martini Racing patches
Ergonomic palm design with reinforced stitching conforms to the hand’s position
Suede grip for finger tips and palm
Elastic wrist support
FIA approved
Sign Up and Save
Subscribe to our eNewsletter to learn about events near you, great deals, new products and for tips to improve your creator skills.