Brey Krause
Brey Krause R-1125 Harness Bar C7 Corvette (All)
$968.93
Brey Krause R-1125 Harness Bar C7 Corvette
This Roll Bar Fits The Following Cars:
C7 Corvette Stingray, Z51 Coupe (2014-2019)
C7 Corvette Z06 Coupe (2016-2019)
C7 Corvette ZR1 Coupe (2019)
The Brey Krause Model R-1125 Harness Bar for the C7 Corvette properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting and fatigue of the driver during the high G-force loads of cornering and braking. Brey Krause bars are easy to install and remove, and will get you ready for the track in just a few hours!
Note: Because of mounting locations in the C7, the B-pillar plastic sail panel covers will require a slot on either side to be cut. Sail panel replacements can be ordered from your GM dealer if you don't want to cut the original panels (Part 23176134 for driver side, and part 23176135 for passenger side). Strength requirements for harness mounts are considerably greater than those for harness guide bars since they must support the entire load applied to the belts.
Brey Krause C7 Harness Bar Details:
Material: Type 304 stainless steel
Finish: Powder coated in durable black wrinkle-finish
Weight: 17.12 lbs
Installation: Bar attaches to factory mounting points in B-pillars
Brey Krause
Brey Krause R-9052 Seat Side Mount Brackets Porsche 991 & 981
$182.47
Brey Krause R-9052 Porsche Race Seat Side Mounts
The Brey Krause R-9052 Seat Side Mount Adapters are designed to help install a multitude of side-mounting racing seats directly to the factory manual sliders1 used on many Porsche 991 and 981 cars. (Porsche OEM sliders are not included.) They also fit some later 997 & 987 Porsches equipped with similar tabbed sliders.
Porsche factory sliders are known for their quality and strength. Along with their longer travel versus aftermarket sliders, they help retain the factory feel in your car. Brey Krause's innovative design allows the side mounts to be installed in four different positions. Combined with included spacers, they are compatible with a multitude of racing seats that are between 390 and 430mm wide. Slightly slotted side-mounting holes allow for fitment to the most popular seat manufacturers (Sparco, Recaro, OMP, Cobra, and more).
The R-9052 is compatible with the Brey Krause R-9259 sub strap mount (available as an option) for use with a five- or six-point racing harness.
Brey Krause R-9052 Side Mount Bracket Details:
Made from 11-gauge T304 stainless steel
Powder-coated in satin black
Weight 5 lbs (2.3 kg)
Fits all Porsche 991 & 981 cars with OEM manual seat sliders (also fits some late 997 & 987 cars with similar tabbed sliders)
Fits side-mount racing seats between 390-430mm wide
Maintains factory seat belt mount
Download installation instructions here
1 Porsche OEM manual seat sliders (not included) are required for seat installation. The R-9052 is not compatible with Porsche power seat sliders. Not compatible with race seat sliders.
Brey Krause
Brey Krause R-925X Sub Strap Mount For BK Side Mount Systems
$118.08
Adjustable Sub Strap Mounting Bar R-925X
The Brey Krause R-9259 Sub Strap Mount is designed to mount directly to any Brey Krause variable-width side mounts and mounting adapters, including those designed to be used with seat sliders. The stainless steel bar is threaded on both ends to allow for length adjustment for seat widths up to 426mm while keeping the sub-strap guide centered. (For seats over 426mm, use the BK-R-9258). This sub strap mount can be used with either driver- or passenger-side mounts.
FEATURES:
T304 Stainless Steel
Brushed Stainless Finish
Weight 2 lbs.
Side Mounts, Sliders, and Harness not included
Brey Krause
Brey Krause R-1155 Harness Bar Gen5-6 Camaro
$783.00
Brey Krause R-1155 Harness Bar For Gen5 & Gen6 Chevy Camaro
The Brey Krause Model R-1155 Harness Bar for the 2015 and later Chevrolet Camaro properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking. Easy to install and remove, the Brey Krause R-1155 Harness Bar uses existing holes and mounting points, and requires no vehicle modification. Kit includes everything needed for a proper 4-point harness set-up, while allowing enough seat travel for the tallest of drivers.
Brey Krause R-1155 Camaro Harness Bar Details:
Fits all Fifth-Gen Chevrolet Camaro models (2009-2014)
Fits all Sixth-Gen Chevrolet Camaro models (2015+)
Material: Type 304 stainless steel
Finish: Powdercoated in durable black wrinkle-finish
Weight: 16 lbs.
Installation: Bar attaches to factory mounting points in "B" pillars.
Brey Krause
Brey Krause Gen6 Camaro Seat Mount w- Sub-Bar Option
from $328.19
Brey Krause Gen6 Camaro Seat Mount w/ Sub-Bar
Everything you need in one place! Select driver or passenger side and add a sub-mount bar for each side!
Brey-Krause manufactures high quality, performance driving accessories for a variety of automobiles. Innovative engineering and superior workmanship are hallmarks of the Brey-Krause automotive products. All Brey-Krause parts can be installed easily, without any modifications, using existing holes and factory mounting points to ensure that the value of the vehicle is never compromised. Whether the car is used on the road or the track, the Brey-Krause performance driving accessories set the standard in both engineering function and aesthetic design. Features:
Material - Type 304 Stainless Steel
Finish - Black gloss powder-coat; Satin finish
Installation - Attaches to driver side factory seat mounting points
R-9172 sub strap mount sold separately (see pull-down)
Miscellaneous - Seat brackets must be purchased separately (see pull-down)
Compatible side mounts when using Recaro sliders - For Sparco Seats to Recaro Sliders (These parts are made for but not limited to the mentioned seats.): R-9060 - Sparco Evo, Momo Super Cup, R-9061 - Sparco Evo 2, Evo 2+, Corsa, OMP HTE-XL
Compatible side mounts when mounting direct to R-9170 - Side Mount Brackets for Sparco Seats (These parts are made for but not limited to the mentioned seats.):R-9071 - Sparco Evo, Pro 2000, R-9072 - Sparco Evo, Pro 2000, R-9073 - Sparco Evo 2, R-9074 - Sparco Evo 2, R-9761 - Sparco Evo 2 Plus, R-9762 - Sparco Evo 2 Plus, R-9075 - Sparco Evo 2 US, R-9076 - Sparco Evo 2 US
Fitment:
Chevrolet Camaro 6th Gen 2016+
RACE SEATS ONLY! Does not work with OEM Recaro seats.
Brey Krause
Brey Krause R-9041 Sparco Slider Adapter Porsche 997-987-991-981
$165.41
Easily Install Sparco Racing Sliders In Your Porsche
The Brey Krause R-9041 Seat Track Adapter Kit allows the installation of Sparco Seat Sliders to the floor of Porsche 911, Boxster, and Cayman models. This in turn allows the ability to adapt various Brey Krause R-906x Seat Side-Mount Brackets (sold separately) to the floor of your compatible Porsche.
FEATURES
TIG welded from 7-Ga. T304 stainless steel
Adapts Sparco 00493 or Cobra sliders to Porsche 991/981/997/996/987/986
Satin-finish stainless steel
Weight: 2 lbs. 6 oz.
Brey Krause
Brey Krause R-9751 OMP HTE Seat Adapter Porsche 997-987-996-986
$248.10
Easily Install OMP HTE Seats In Your Porsche
The Brey Krause R-9751 Driver-side Racing Seat Side Mount Bracket (for Passenger-side, see R-9752) allows for the easy installation of OMP HTE Racing Seats into Porsche 996, 997, Boxster, and Cayman models using the OEM factory non-power sliders. It can also be used with BK's R-9044 assembly.
Designed to keep the seat as low as possible, the four mounting positions provide a wide range of recline options. An inboard threaded seat belt mount is integrated into the adapter.
FEATURES:
Fits all Porsche 996, 997, Boxster/Cayman (986/987) models with non-power seats.
Designed to fit OMP HTE Racing Seats.
Material: 11 gauge, Type 304, stainless steel.
Finish: Powder coated in durable black wrinkle-finish.
Weight: 4 lbs.
Note: Factory non-power slider assembly from the 996/986 (and some 997/987s) required for installation. Will not fit sliders with power option.
Brey Krause
Brey Krause R-9044 Seat Adapter w Sub Mount Porsche 996-997-986-987
$282.57
Brey Krause Side-Mount Adapter & Sub Strap Bar
The Brey Krause R-9044 Side-Mount Adapter with Integrated Sub-Strap Bar makes installing racing seats in your Porsche straightforward and painless. Designed for the Porsche 996, 997, Boxster or Cayman, the R-9044 does away with your OEM seat sliders, mounting the seat as low as possible in the car and removing excess weight. An integrated sub-strap bar is adjustable for proper 5 or 6-point sub-strap routings.
Three front-to-rear fixed mounting points allow your Brey-Krause Side-Mount Adapters (not included) to be installed in several fore-aft positions. Best of all, the entire assembly can be quickly installed before a track event and just as easily removed when you're back home. Voila! The daily driving comfort of your stock seats plus the bolstering and safety of a racing seat when you're at the track.Brey Krause side-mount brackets can be added separately in the dropdown above, creating a ready-to-bolt-in racing seat system!
FEATURES:
Fits Porsche 911 Carrera (996/997), Boxster & Cayman (986/987)
Material: Type 304 Stainless Steel
Weight: 4 lbs.
Finish: Satin
Side mounts not included
Brey Krause
Brey Krause R-9172 Sub Strap Mount For 6th Gen Camaro
$64.32
Sub Strap Mounting Bar for 2016+ Gen 6 Camaro
The Brey Krause R-9172 Sub Strap Mount is designed to mount directly to Brey Krause seat track adapter R-9170 or R-9171. This sub strap mount can be used with either driver- or passenger-side mounts.
Brey Krause R-9172 Gen 6 Camaro Sub Strap Mount Details:
Material: T304 stainless steel
Finish: brushed stainless steel
Weight: 2 lbs. (0.9 kg)
Side mounts, sliders, and harness not included
Brey Krause
Brey Krause R-9775 Cobra Nogaro Mount Porsche 996-997-986-987 Sliders
$249.36
Brey Krause R-9775 Cobra Nogaro Seat Mount for Porsche Seat Sliders
The Brey Krause R-9775 makes adapting the phenomenal Cobra Nogaro seats to your Porsche's OEM manual sliders (not included)1. It can also be used with the Brey Krause R-9044 Seat Adapter for a lower mounting height and even lighter weight. The Cobra Nogaro is the perfect balance between a full-fledged racing seat (with pass-throughs for harness shoulder and anti-sub belts) and a seat comfortable enough for daily driving or weekend touring.
With threaded lap belt bosses on both sides, the R-9775 works on both the driver- and passenger-side. It makes adapting the Nogaro to your OEM Porsche non-powered sliders a breeze. The Schroth Profi II GT3 six-point harness bolts right up, as well as your OEM inboard seat belt receptacle. Add the BK-9030 sub-belt adapter (available in the dropdown above) and you really have the best of both worlds!
Brey Krause R-9775 Nogaro Mount Details:
Fits all Porsche 996, 997, Boxster/Cayman models with manual seat sliders.
Designed to fit Cobra Nogaro Sport Seats.
Material: 11 gauge, type 304, stainless steel.
Finish: Powder coated in durable black wrinkle-finish.
Weight: 4 lbs.
Porsche manual seat slider (pictured) not included
1 Porsche OEM manual seat slider assembly (not included) from the 996/986, as well as many 997/987 models, is required for installation.
Not compatible with power seat sliders.
Brey Krause
Brey Krause R-9030 Sub Strap Mount
$158.51
Brey Krause Sub Strap Mount
The Brey Krause R-9030 works with BK's R-907x side mount brackets in conjunction with factory non-power 996/997/986/987* sliders to give you a straightforward solution to mounting your harness sub straps. A one-piece seat with anti-sub strap pass-through is required.
Expertly crafted from 1.5" x 1" x 0.125" wall carbon steel tubing and powder coated in a black wrinkle-finish, the R-9030 is strong and durable.
FEATURES:
Fits all Porsche 996, 986 , most 997.1 and 987.1 with manual seat sliders*
Material: 1.5" x 1" x 0.125" wall carbon steel
Finish: Powder coated black wrinkle-finish
Weight: 3 lbs.
* Note: Factory non-power slider assembly from the 996/986 (and most 997/987s) required for installation. Will not fit 997.2 or 987.2 with tabbed sliders. Will not fit power-operated sliders.
Brey Krause
Brey Krause R-9530 Quick Release Fire Extinguisher Mount
$301.94
Brey Krause QR Fire Extinguisher Mount
For HPDE participants and racers alike, the Brey Krause R-9530 Quick Release Fire Extinguisher Mount is designed for use with extinguishers with a 90mm diameter, such as the Lifeline AFFF Handheld. This precision-machined bracket gives you quick and easy removal of the fire extinguisher when seconds count.
Mounts with four bolts to any surface, or an existing Brey Krause fire extinguisher bracket.
Fire extinguisher not included.
Brey Krause
Brey Krause Gen5 Camaro Seat Mount w- Sub-Bar
$328.19
Brey Krause Gen5 Camaro Seat Mount w/ Sub-Bar
Everything you need in one place! Select driver or passenger side and add a sub-mount bar for each side!
Brey-Krause manufactures high quality, performance driving accessories for a variety of automobiles. Innovative engineering and superior workmanship are hallmarks of the Brey-Krause automotive products. All Brey-Krause parts can be installed easily, without any modifications, using existing holes and factory mounting points to ensure that the value of the vehicle is never compromised. Whether the car is used on the road or the track, the Brey-Krause performance driving accessories set the standard in both engineering function and aesthetic design. Features:
Material - Type 304 Stainless Steel
Finish - Black gloss powder-coat; Satin finish
Installation - Attaches to driver side factory seat mounting points
R-9172 sub strap mount sold separately (see pull-down)
Miscellaneous - Seat brackets must be purchased separately (see pull-down)
Compatible side mounts when using Recaro sliders - For Sparco Seats to Recaro Sliders (These parts are made for but not limited to the mentioned seats.): R-9060 - Sparco Evo, Momo Super Cup, R-9061 - Sparco Evo 2, Evo 2+, Corsa, OMP HTE-XL
Compatible side mounts when mounting direct to R-9170 - Side Mount Brackets for Sparco Seats (These parts are made for but not limited to the mentioned seats.):R-9071 - Sparco Evo, Pro 2000, R-9072 - Sparco Evo, Pro 2000, R-9073 - Sparco Evo 2, R-9074 - Sparco Evo 2, R-9761 - Sparco Evo 2 Plus, R-9762 - Sparco Evo 2 Plus, R-9075 - Sparco Evo 2 US, R-9076 - Sparco Evo 2 US
Fitment:
Chevrolet Camaro 5th Gen
RACE SEATS ONLY! Does not work with OEM Recaro seats.
Brey Krause
Brey Krause R-1120 Harness Bar C6 Corvette
$1,017.38
Brey Krause R-1120 Harness Bar C6 Corvette
The Brey Krause Model R-1120 Harness Bar for the C6 Corvette properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking. Our bars are easy to install and remove, and will get you ready for the track in just a few hours!
NOTE: Because of mounting locations in the C6, the B-pillar plastic sail panel covers will require two holes to be drilled through them. Brey-Krause provides plastic plugs to cover the holes if the bar is ever removed. Sail panels replacements can be ordered from your GM Dealer (Part 15277640 for driver side, and 15277641 for passenger side) if the plastic plugs are not the desired solution. Strength requirements for harness mounts are considerably greater than those for harness guide bars since they must support the entire load applied to the belts.
Brey Krause R-1120 C6 Harness Bar Details:
Manufacturer: Brey Krause
Manufacturer Part Number: R-1120
Material: Type 304, stainless steel
Finish: Powder coated in durable black wrinkle-finish
Weight: 17.2 lbs.
Installation: Bar attaches to factory mounting points in "B" pillars.
Brey Krause
Brey Krause C6-C7 Corvette Extra Low Seat Mount w- Sub-Bar
$262.48
Brey Krause C6/C7 Corvette Extra Low Seat Mount w/ Sub-Bar
The Brey Krause R-9153 Driver-side seat mount offers a solution to the low roof-line of the C7 Chevrolet Corvette. The racing seat adapter places the seat rails at a slant, allowing the seat to be lower in a rearward position when combined with a Recaro Slider (sold separately). This slant allows the seat to sit higher when in a forward position (perfect for shorter drivers), while offering increased head clearance when adjusted rearward for taller drivers. The R-9153 bolts directly to the floor of the C7 Corvette, and combines with a Recaro slider to allow the installation of many seat options when used with Brey Krause side-mounts. Also compatible with the C6 Corvette if you are searching for additional head-room.The mounting kit comes complete with an adjustable integrated Sub-Bar for correct mounting of your 5 or 6 point harness system. The design also allows for the reuse of stock 3-point belts, with inboard/outboard lap belt mounting locations built in. Note: Brey Krause Seat brackets must be purchased separately - see Brey Krause R-906X series side mount brackets.PLEASE NOTE: Although this kit allows for the installation of many brands and models of seats, due to the extremely low roof-line and the tight confines of the C7 Corvette, many larger seats will not fit. Please contact one of our racing seat experts (844) 438-7244 with questions relating to your particular installation needs.
FEATURES:
Materials: Aircraft-grade aluminum and Type 304 stainless steel (sub-bar)
Finish: Black gloss powder coat
Weight: 7.8 lbs.
Models: Fits C6 and C7 coupes (2005 - 2019), including Z06
All necessary hardware included
Brey Krause
Brey Krause R-1032 Harness Bar Porsche 991 & 992
$879.00
Brey Krause R-1032 Harness Bar For Porsche 991 & 992 (Except Targa)
Harness Mount Bar pictured has a custom powder coat. All Brey Krause Harness Mount Bars come with a wrinkle black powder coat.
The Brey Krause Porsche 991 & 992 harness mount bar has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements. The 991 harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking. Our bars are easy to install and remove, use only existing holes and mounting points, and will not damage the car in any way.
Strength requirements for harness mounts are considerably greater than those for harness guide bars since they must support the entire load applied to the belts. A mount really can't be relied on unless it has been tested to support the loads required by the National Highway Traffic Safety Administration.
The Brey-Krause Harness Mount supported the loads specified by the National Highway Traffic Safety Admin. DOT for upper torso restraints in all automobiles. Tensile tests performed by an independent lab.
Brey Krause R-1032 Porsche Harness Bar Details
Manufacturer: Brey Krause
Manufacturer Part Number: R-1032
Material: Type 304 stainless steel
Design: Allows seat travel for tall drivers; includes provisions for Seat Back Brace.
Installation: Attaches to seat belt mounts & seat track hardware.
Models: Porsche 991 & 992 (except Targa models must use R-1033 down tubes).
Weight: 16 lbs
Finish: Powder coated in durable black wrinkle-finish.
Sign Up and Save
Subscribe to our eNewsletter to learn about events near you, great deals, new products and for tips to improve your creator skills.