Bell Racing Helmets

The Bell HP77 8860: Championship Pedigree Auto Racing Helmet Based on Bell’s highly successful F1 World Champion proven HP7 design, the Bell HP77 8860-2018 provides the latest impact protection by lowering the visor opening 12 mm and reinforcing the front of the helmet with advanced ballistic protection (ABP). The HP77 is the most advanced FIA8860-2018 helmet in Bell’s line-up, setting a new standard for lightweight, aerodynamically superior carbon fiber helmet performance to meet the intense demands of open-wheel and open-cockpit racing. The Bell HP77 carbon fiber helmet is homologated to the FIA 8860-2018 ABP standard, the most rigorous sport helmet standard on the planet. The Bell HP77 carbon fiber helmet was designed for professional formula racers competing at the highest levels of the sport and for any other racing driver who considers safety of paramount importance. Bell HP77 8860-2018 Carbon Fiber Helmet Details: Manufacturer: Bell Helmets Manufacturer part no.: 11280 Homologation: FIA8860-2018 ABP Visor opening lowered 12 mm adding ballistic protection from medium-size debris High-strength and high-modulus carbon fiber shell Advanced multi-density, multi-piece liner for energy absorption and impact performance Optical-grade injection molded Double Screen Anti-Fog (DSAF) visor Top and chin bar ventilation system with 12 intake and exhaust channels Shell and shield design optimized for aerodynamic performance Integrated channels for drink tube and radio systems Top spoiler, top and chin bar gurneys available separately Factory-installed HANS anchors HP helmet bag included Color: Matte Carbon Fiber Finish Sizes: 54cm to 59+ Compatible Shields: SE077 Shield Pivot Kit: SV (SE07, SE077) Bell HP77 Interior Fabric Color Options: Custom interior fabric is available in Black, White, Red, Tan, Purple, Blue, Green or Neon Yellow. These are special order, additional charges will apply. Grey interior fabric is standard.

Bell HP7 EVO III 8860: Designed to FIA Super Helmet Standards Developed in close collaboration with leading F1 drivers and teams, the carbon fiber Bell HP7 EVO III is aerodynamically sleek, lightweight and efficient, designed to excel under the intense demands of open-wheel and open-cockpit racing. The updated Bell HP7 EVO-III meets the FIA's FIA8860-2018 "super helmet" standard, the most advanced sport helmet standard in the world. Designed for professional drivers competing at the highest levels of motorsports, the Bell HP7 EVO III Carbon Fiber helmet allows racers to take advantage of technological innovations like aerospace composite materials and advanced energy absorbing liner systems. Bell HP7 Carbon Fiber FIA 8860-2018 Helmet Details: Manufacturer: Bell Helmets Model number: 11010xx Construction: High-strength and high-modulus carbon fiber ultra-light shell Color: Carbon, Matte Finish Homologation: FIA 8860-2018 Sizes: 54cm to 61+cm Interior: Advanced multi-density, multi-piece liner Visor: Optical-grade SE07 Double Screen Anti-Fog (DSAF) Ventilation: Top and chin bar ventilation system with 12 intake and extraction channels Bell HP7 EVO III Carbon Fiber Additional Features: Shell and shield optimized for aerodynamic performance, low internal noise, and impact energy management Integrated channels to install drink tube and radio systems Available with or without duckbill (chin spoiler) Top spoiler, top and chin bar gurneys available separately Factory installed HANS anchors included Add a Thunderhill Performance Racing Helmet Bag to keep your new Bell HP7 Carbon Fiber helmet safe and secure throughout each a race weekend. Bell HP7 Carbon Fiber FIA 8860-2018 Helmet Interior Colors Alternative interior fabric colors: Black, White, Red, Tan, Purple, Blue, Green and Neon Yellow (by special order, additional charges will apply). Grey interior is standard. This helmet will ship with signature required for delivery.

The Bell Helmets HP6 8860: Closed-Cockpit King Incorporating technology used in Bell's state-of-the-art HP7 Advanced Helmet, the Bell HP6 is homologated to the latest FIA 8860-2018 standards. With its modern and aggressive design, the Bell HP6 was developed especially for racers in closed-cockpit environments. The Bell HP6 combines a wide eye port, for extended vision, with an ultra-lightweight advanced carbon fiber shell. Its ventilation slots can be connected to various types of air intakes drawing air from external cooling systems. The HP6 can also be fitted with optional ear cups providing optimal noise insulation. Fully-integrated radio communication and hydration systems are available. Bell HP6 8860-2018 Carbon Fiber Helmet Details: Manufacturer: Bell Helmets Manufacturer part no.: 11400 Construction: full advanced carbon fiber shell Exterior Color: carbon, matte finish Interior: dark grey high strength, high comfort FR fabric Homologation: FIA 8860-2018 Factory installed HANS anchors: yes Bell HP helmet bag: yes Shield: Bell SV06 DSAF Bell HP6 8860-2018 Features & Options: Wide eye port for extended vision in closed-cockpit cars Advanced multi-density, multi-piece liner Integrated channels for drink tube and radio systems Extraction vents maximize air circulation Alternative interior colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order, additional cost) Top forced air intake can be installed on left or right top side vents to connect an external cooling system Forced air kits available including Quick Lock (V10), fully compatible with Maglock Optional ear cups for increased noise insulation In The Box of Your Bell HP6 8860-2018 Carbon Fiber Helmet: Bell HP6 8860-2018 Carbon Fiber helmet Clear SE06 3mm DSAF shield (installed) Bell HP helmet bag Plastic tear-off posts (installed) Hex wrench key

Bell RS7C LTWT: Cutting Edge Protection in a Lightweight Package Based on the design of the range-topping Bell HP7, the Bell RS7 LTWT features an extraordinary lightweight carbon-composite shell made using Bell’s high-pressure proprietary molding system. The Bell RS7 LTWT Carbon's innovative shell and shield design improve acoustic comfort, aerodynamic performance, and energy absorption. The Double Screen Anti-Fog (DSAF) shield and rubber eye port gasket ensure air, water, and dust don't enter the helmet. Bell RS7C LTWT Carbon Fiber Helmet Details: Manufacturer: Bell Helmets Manufacturer part number: 1237A Certification: Snell SA2020 Construction: aerospace grade ultra-light carbon fiber shell Color: carbon matte clear Shield: Bell 3mm SE07 Shield included: clear optical-grade injection molded Double Screen Anti-Fog (DSAF) Sizes: 54cm to 61cm+ HANS anchors: factory installed Ear cups: included Pivot kit: SV(SE07, SE077) Bell RS7C LTWT Additional Features: Advanced multi-density, multi-piece liner maximizes energy absorption and impact performance Multi-purpose fitment system with or without included ear cups Top and chin bar ventilation system with 14 intake and extraction channels Interior ventilation channels maximize air flow Shell and shield optimized to improve aerodynamic performance Integrated channels for drink tube and radio systems Top spoiler, top gurney and chin-bar gurney available separately Top air attachments available separately Additional Bell RS7C LTWT Carbon Fiber helmet shields available here

Bell GT6 RD Carbon: Factory Comms & Drink Tube Installed Derived from iconic Bell HP6, the Bell GT6 RD Carbon features the same modern and aggressive design developed for racers in closed-car environments, featuring a wide eye port for extended vision with an ultra-lightweight Premium carbon shell. Its ventilation slots can be connected to various types of air intakes for external cooling systems. The GT6 RD is fitted with a fully-integrated radio communication kit, including a front-mounted microphone and ear cup speakers providing excellent sound along with insulation from external noise. The kit includes a wired four-pin male IMSA radio connector. Bell GT6 RD Carbon Fiber Helmet Details: Manufacturer: Bell Helmets Manufacturer part number: 123912 Construction: Ultra-light premium carbon-composite shell Homologation: FIA 8859-2015 and Snell SA2020 Factory installed HANS anchors: yes Interior: dark grey high-strength, high-comfort FR fabric Color: carbon, gloss finish Sizes: 6 3/4 (54cm) to 7 5/8+ (61cm+) Bell GT6 RD Carbon Fiber Helmet Additional Features: Factory-installed communication system with microphone and ear cups (IMSA connector) Factory-installed drink tube Wide eye port for better vision in closed cockpit cars Advanced multi-density, multi-piece liner maximizes energy absorption and impact performance Integrated channels for optional drink tube (not included) Extraction vents maximize cooling air ventilation Optional top- and side-air intakes available for use with external cooling system Ear cups increase noise insulation What's In The Bell GT6 RD Carbon Box: GT6 Carbon Fiber helmet Installed communications Hans anchors Clear Bell SE06 3mm DSAF shield Draw-string helmet bag Plastic tear-off posts installed Hex wrench key Drink tube system (shown in photos for illustrative purposes) is not included.

Bell RS7 Carbon Fiber Helmet The Bell RS7 Carbon Fiber SA2020 helmet features Bell’s proprietary high-pressure molding system based on the innovative design of the Bell HP7. The ultra-light carbon fiber shell is designed for optimum acoustic comfort, energy absorbing capability, and ideal aerodynamic performance. Top forced-air inserts improve internal ventilation while the hollow synthetic rubber gasket seal ensures that air, water, and dust won’t enter the helmet in outdoor racing environments. The Bell RS7 Carbon Fiber SA2020 helmet’s advanced ventilation system features 14 intake and extraction channels with air intake covers in a refined aero design for the most discerning racers. Bell RS7 Carbon Fiber Helmet Details: Manufacturer: Bell Helmets Manufacturer part number: 1204A Homologation: Snell SA2020 and FIA 8859-2015 Construction: High pressure molded carbon fiber shell Sizes: 54cm to 61+cm Interior: Grey Comfort-Max FR® moisture-wicking fabric Shield: clear SE07 3mm DSAF shield w/ DSAF insert Included: M6 HNR terminals and hex wrench Bell RS7 Carbon Notable Features: Fourteen intake and exhaust channels move hot air out of the helmet Multi-piece, multi-density high-impact custom bead absorbing liner for low- and high-velocity impact protection Excellent high-speed aerodynamic stability with optional chin bar, top Gurneys, and rear spoiler Optional top forced-air inserts include eyeport, eight-hole and ten-hole kits Integrated channels for optional integrated drink tube and radio systems. Pro-style, multi-density foam interior with contoured cheek pads for professional fit Narrow eye port This helmet will ship with signature required for delivery.

Bell GT6 Carbon: Your Competitive Edge The Bell Helmets GT6 Carbon Fiber racing helmet features the same modern and aggressive design at Bell's iconic HP6 helmet. Developed for racers in closed-cockpit cars, the Bell GT6 Carbon Fiber features an ultra-lightweight premium carbon shell with a wide eyeport for extended field-of-view. Its ventilation slots can be connected to various types of external air cooling systems. And it can be fitted with optional ear cups providing optimal noise insulation. Fully integrated radio communication and hydration systems are available separately, or come factory-installed in the Bell GT6 RD Carbon Fiber. Bell Racing GT6 Carbon Fiber Helmet Details: Manufacturer: Bell Helmets Manufacturer part no.: 12390 Homologation: FIA8859-2015 and Snell SA2020 Sizes: 54cm (6 3/4) to 61cm+ (7 5/8+) Construction: Ultra-lightweight premium carbon-composite shell Color: Gloss carbon fiber Interior: Dark grey high-strength, high comfort FR fabric Shield: SE06 3mm DSAF Factory installed HANS anchors: yes Bell GT6 Carbon Fiber Helmet key Features: Wide eyeport for optimal field-of-view in closed-cockpit cars Advanced multi-density, multi-piece liner maximizes energy absorption and impact performance Integrated channels for optional drink tube and radio systems Extraction vents maximize cooling air circulation Optional top- and side-air intakes available Optional ear cups for increased noise insulation Alternative interior fabric colors are available by special order: Tan, White, Red, Purple, Blue, Green and Neon Yellow Included in the Bell Racing GT6 Carbon Fiber Box: Bell Racing GT6 Carbon Fiber helmet Clear SE06 3mm DSAF shield (installed) Drawstring helmet bag Plastic tear-off posts (installed) Hex wrench key

Bell BR8 Carbon: Ultimate Performance, Unmatched Safety Designed for off-road and dirt track racing, the versatile and ultra-lightweight Bell BR8 Carbon Fiber helmet can be used in multiple configurations including standard, left- or right-side forced air, left- or right-three quarters top forced air, or top forced air. Utilizing an innovative kit system, included with the helmet, racers can customize the BR8 Carbon fiber helmet to adapt to different forms of racing and seat configurations providing the ultimate flexibility in one model. The Bell BR8 Carbon Fiber helmet features an aerodynamic front duckbill, Double Screen Anti-Fog (DSAF) insert to create a positive, fog-free visor seal, and rear-facing venturi airflow vents that prevent dust from entering the helmet while still allowing forced air to flow freely. The Bell BR8 Carbon Fiber helmet features a unique air chamber system, evenly distributing airflow around the head regardless of the top air configuration used. This helmet can be used with or without ear cups. Bell BR8 Carbon Fiber Helmet Details: Manufacturer: Bell Helmets Manufacturer part no.: 1238A Construction: lightweight carbon fiber shell Interior: Dark grey fire resistant fabric Homologation: FIA 8859-2015 and Snell SA2020 Color: gloss carbon fiber Front duckbill: included Sizes: 57cm- (7 1/8-) to 61cm+ (7 5/8+) Shield (clear shield included): Bell SRV-8 Shield pivot kit: Bell SRV-1 Bell BR8 Carbon Fiber Helmet Features: Integrated channels to install optional drink tube and radio systems Advanced multi-density, multi-piece liner maximizes energy absorption and impact performance Multi-purpose fit system with or without included ear cups Interior ventilation channels maximize airflow Can be converted to side-, three quarter-, or top-air Rear vents create a venturi effect pulling cool air through the helmet while keeping dust and dirt out Synthetic rubber eyeport gasket prevents dirt and water from entering

ULTRA-LIGHT CARBON FIBER KARTING HELMET Bell Racing is proud to introduce the KC7 CMR Carbon, the first ultra-lightweight carbon fiber youth karting helmet on the market. Based on the HP7 Formula 1 helmet, this sleek, aerodynamic design features an advanced ventilation system with 14 air intake and extraction channels designed to maximize cooling and a double screen anti-fog (DSAF) insert to prevent fogging in rainy conditions. Certified to the FIA/ Snell CMR standard designed for karting drivers under the age of 18, the KC7 CMR Carbon is a winning choice for the next generation of champion drivers. Ultra-Lightweight Carbon Fiber Shell: 2.6 lbs. (sizes 52-56) or 2.7 lbs. (sizes 57-59) Innovative shell and shield design improve acoustic Comfort, Aerodynamic Performance and Energy Absorption Design based on the innovative HP7 used in F1 Advanced Ventilation System with 14 Intake and Extraction Channels Front and Side Air Intakes Available (Sold Separately) Hollow Synthetic Rubber Gasket Seal Ensuring that Air, Water and Dust Can’t Penetrate into the Helmet Multi-Piece, Multi-Density High-Impact Custom Bead Absorbing Liner for Low and High Velocity Impact Protection Aerodynamic Accessories including Chin Bar and Top Gurneys and Rear Spoiler (Sold Separately) for Improved Aero Performance and Stability at High Speeds Pro-Style, Multi Foam Density Interior with Superior Moisture Wicking Properties Comfort-Plus Karting Style Interior with Removable / Replaceable Cheek Pads SE07 2MM DSAF Shield (SV SE07 Pivot System) – Clear Shield Double Screen Anti-Fog (DSAF) Visor Insert For Improved Anti-Fog Performance Draw String Helmet Bag Included Hex Wrench Included FIA/Snell CMR2016 Homologation This helmet will ship to you with signature required for delivery.

Bell Helmets GTX3 Carbon: The King of the Open Cockpit The sleek, aerodynamic Bell Racing Helmets GTX3 Carbon Helmet SA2020 features an ultra-lightweight carbon fiber shell, a front chin-bar gurney and an integrated rear wing to provide the open-cockpit driver with improved aerodynamic performance and high-speed stability. The Bell Racing Helmets GTX3 Carbon is ideal for use in dusty, open-wheel environments with its integrated shield, double screen anti fog (DSAF) visor, rubber gasket seal, and rear-facing vents to help with air exchange and provide clear vision while racing in the elements. This stylish helmet carries Snell SA2020 approval, FIA 8859-2015 Homologation, and comes with M6 terminal hardware for your Head and Neck Restraint (HANS) device. These safety and comfort features make the Bell Racing Helmets GTX3 Carbon Helmet SA2020 is ideal for dirt track, karting, open-wheel, formula, and all types of open-compartment racing where clean, distraction-free airflow is essential for competition. Bell GTX3 Carbon Fiber Helmet Details: Manufacturer: Bell Helmets Manufacturer part no.: 1207Axx Homologation: Snell SA2020 and FIA 8859-2015 Shield: SE03 3mm DSAF Shield pivot system: SV SE03/05 Construction: high pressure-molded carbon fiber Interior: ultra-plush grey Comfort-Max FR® fabric Eye port: standard size Hardware included: M6 terminals for HANS, hex wrench Chin bar Gurney (duckbill): included Sizes: 57cm- to 61cm+ Bell GTX3 Carbon Fiber Features and Options: Sleek aerodynamic styling with integrated wing Venturi airflow system allows air exchange while preventing dust and dirt from entering the helmet Hollow synthetic rubber gasket keeps out dust, dirt, and water Multi-piece, multi-density high-impact custom bead absorbing liner for low- and high-velocity impact protection Integrated channels for optional drink tube and radio systems Pro-style, multi -foam density interior with contoured cheek pads for professional fit Double Screen Anti-Fog (DSAF) visor insert for improved anti-fog performance This helmet will ship with signature required for delivery.

Bell GP3 Carbon: Ultimate Safety and Performance The Bell GP3 Carbon Fiber SA2020 auto racing helmet is ideal for open-air and open-cockpit racers who need maximum ventilation and clear vision in complex racing environments. This helmet has traditional F1 styling, an ultra-lightweight carbon fiber shell, and a dynamic air intake system for cutting-edge aerodynamic performance. The Bell GP3 Carbon Fiber Helmet SA2020 is a top pick for formula, kart, and all types of open wheel racers who value comfort, performance, and professional-level features. This helmet now has improved shield integration, a rubber gasket seal, manual lever-closable air vents, and a double-screen, anti-fog (DSAF) visor to accommodate a tough race exposed to the elements. Bell GP3 Carbon Fiber Helmet Details: Manufacturer: Bell Helmets Manufacturer part no.: 1206Axx Homologation: Snell SA2020 and FIA 8859-2015 Sizing: 57cm- to 61cm+ Shield: Bell SE03 3mm DSAF Shield pivot kit: Bell SV SE03/05 Construction: high-pressure molded carbon fiber shell Chin bar Gurney (duckbill): included Interior: ultra-plush grey Comfort-Max FR® fabric Included hardware: M6 HANS hardware, hex wrench Bell GP3 Carbon Fiber Helmet Features and Options: Direct-flow chin vents and manual air intakes provide exceptional ventilation Ambient noise reduction options with ear cup configuration Hollow synthetic rubber gasket seals out water, dust, and dirt Multi-piece, multi-density high-impact custom liner for low- and high-velocity impact protection Integrated channels for optional drink tube and radio systems Contoured cheek pads for professional fit In the Box of the Bell GP3 Carbon: GP3 Carbon Clear SE03 DSAF Shield Installed Hans Post Anchors Installed Manual Lever Air Intake Vents Installed Draw String Helmet Bag Plastic Tear-off Posts Installed 3 Stainless Circle Grommets Hex Wrench Key This helmet will ship with signature required for delivery.

BELL RS7 K ULTRA-LIGHT CARBON FIBER KARTING HELMET The RS7K Carbon, based on the RS7C LTWT developed in collaboration with Penske Racing, is designed for the professional kart racer who knows weight and optimal performance are linked. The RS7K Carbon is the karting-only version (non-fire retardant, extra durable interior) of the LTWT series and is the lightest adult karting helmet available on the market weighing under 2.75 pounds race-ready. The helmet features a lightweight carbon shell, an innovative shell and recessed shield design to improve acoustic comfort while enhancing aerodynamic performance and energy-absorbing capabilities. The sleek, modern design incorporates an advanced ventilation system, Double Screen Anti-Fog (DSAF) shields, and a rubber gasket seal that ensures that water does not enter the eye opening in rainy conditions. Aerospace grade ultra-lightweight carbon shell Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance Multi-purpose fit system that can be used with or without ear cups (ear cups included) Optical grade injection molded Double Screen Anti-Fog (DSAF) visor for anti-fog control and superior visibility Powerful and effective top and chin bar ventilation system with 14 air intake and extraction channels for maximum ventilation Shell and shield design optimized to improve aerodynamic performance, reduce internal noise, and enhance energy management capacities Rear spoilers, top gurney, and chin bar gurneys available separately Non-fireproof lining for extra durability RS7K Carbon is NOT compatible with head and neck restraint anchor systems or devices Synthetic rubber gasket seal to prevent dirt and water from entering the helmet Shield and pivot kit: SE07 3mm, SV(SE07,SE077) Homologation: Snell K2020 approved Alternative interior fabric colors: Black, Blue, Green, Red, Tan, Violet, White and Yellow (by special order) Color: Carbon Gloss Clear Sizes: 7 1/8- (57-) to 7 5/8+ (61+) This helmet will ship to you with signature required for delivery.

Bell Helmets M.8 Carbon Fiber Helmet SA2020 The Bell M.8 Carbon Fiber SA2020 is designed with comfort in mind while keeping with traditional Bell M style. Its large eye port opening and adjustable forehead vents to reduce potential fogging are designed for the driver who wears sunglasses or eyeglasses. The Bell M.8 Carbon Fiber SA2020 helmet is available in seven sizes, from XS to XL+, providing a near-custom fit with a wide spectrum of sizes. The helmet is certified for use with HANS devices with integrated M6 female threaded inserts for HANS post anchors, which are sold separately. The Bell M.8 Carbon Fiber SA2020 helmet includes a clear face shield and black visor strip, shield hardware with a hex wrench, and a drawstring helmet bag to keep it all together. The Bell M.8 Carbon Fiber is Snell SA2020 and FIA 8859-2015 approved. Don't forget to pick up the Thunderhill Performance Racing Helmet Bag to keep your new Bell M.8 Carbon safe and sound throughout race weekends! Bell Helmets M.8 Carbon Fiber Auto Racing Helmet Details: Snell SA2020 and FIA 8859-2015 homologated. Carbon fiber shell is ultra-lightweight (Size M = 2.9 lbs./1.3 kg). High-pressure molding system improves shell strength. High-impact custom bead absorbing liner is multi-piece/multi-density for low- and high-velocity impact protection. Integrated channels for optional drinking tube and radio microphone systems. Black Comfort-Plus FR® interior fabric for excellent moisture wicking. Exceptional fit with multi-density foam interior. Best-in-class ventilation system includes direct-flow chin vents and manual level air intakes. Hollow synthetic rubber gasket seal keeps out water, dust, and dirt. Large eye port for eyeglass wearers. Includes clear SRV-8 3mm SRV shield (SRV-1 pivot system). Additional tinted shields are available here. M6 terminal hardware and hex wrench for Head and Neck Restraint anchors. Available only in carbon fiber finish. This helmet will ship with signature required for delivery.

Bell Racing Helmets KC7-CMR "Lewis Hamilton" Karting Helmet F1 World Champion Lewis Hamilton designs special edition Bell karting helmet Bell Racing Helmets teamed up with F1 Multiple World Champion Lewis Hamilton to develop a special edition “Lewis Hamilton” KC7 CMR Karting helmet for the 2019 racing season. Lewis Hamilton worked personally with Bell’s in-house custom paint team to create a custom graphic for the KC7 CMR with the signature elements and colors of his F1 design. This special edition KC7 CMR features a multi-layer red SE07 2mm visor, clear top and side air intakes, clear rear spoiler and HP helmet bag. The KC7-CMR, an ultra-lightweight youth karting helmet, incorporates the same technology, aerospace materials and construction methods used to build the advanced Bell HP7 helmet used by Lewis Hamilton in F1 competition. The KC7-CMR's sleek, aerodynamic design features an advanced ventilation system that can be used with or without air intakes to maximize cooling and a double screen anti-fog (DSAF) visor to eliminate fogging. Homologated to the Snell/FIA CMR standard and certified for global competition, the KC7-CMR is designed to minimize weight for karting drivers under the age of 18. The Bell KC7-CMR is the perfect helmet for the next generation of champions as they start their racing career in karting. SPECIFICATIONS: Ultra lightweight helmet featuring a carbon/fiberglass shell: 2.6 lbs. in sizes 54 - 56cm and 2.7 lbs. in sizes 57 - 59cm (+/- 3%). Advanced multi-density, multi piece liner to maximize energy absorption and impact performance. Cutting-edge style based on the Bell HP7 used in F1. Graphic design created by Lewis Hamilton reflecting his F1 helmet livery. Powerful top and chin bar ventilation thanks to a total 14 air intake and extraction channels. Optimized shield design resulting in improved aerodynamic behavior and energy absorbing capacities. Multilayer red SE07 2mm visor. Clear top and side air intakes mounted on the helmet. Clear spoiler mounted on the helmet. Non-fireproof lining for extra durability. Snell-FIA CMR-2016 approved. Sizes: 54 to 59 cm. Snell-FIA CMR-2016 approved.

Bell MAG-10 Rally Pro Open Face Helmet Experience the pinnacle of motorsports protection with the Bell open face helmet, fully compliant with FIA 8856-2015 homologation standards. Crafted from a lightweight yet robust fiberglass-carbon composite shell, this helmet promises durability without compromising on comfort. Key features include the state-of-the-art ZeroNoise intercom set, a built-in Nexus socket with a removable cover, and a detachable chin bar designed specifically for a microphone arm. For added convenience, it comes with easily removable cheek pads. The adjustable peak paired with an integrated anti-scratch dark smoked sunscreen ensures optimal vision in varying conditions. Plus, for enhanced safety, it's fitted with HANS clips, making it a top choice for motorsports enthusiasts who prioritize both style and safety." Bell Mag-Pro Rally Helmet Features & Options: Compliant with FIA 8856-2015 homologation standards Lightweight fiberglass-carbon composite shell ZeroNoise intercom set integration Built-in Nexus socket with removable cover Detachable chin bar for microphone arm flexibility Easily removable cheek pads for comfort customization Adjustable peak for varied lighting conditions Integrated anti-scratch dark smoked sunscreen Equipped with HANS clips for enhanced safety Designed for elite motorsports enthusiasts

Bell Racing Helmets RS7 Pro Based on the Bell HP7 helmet design and featuring a lightweight carbon composite shell using Bell’s high-pressure proprietary molding system, the Bell Helmets RS7 Pro auto racing helmet uses an innovative shell and shield design to improve acoustic comfort, aerodynamic performance and energy absorbing capabilities. The sleek, modern design features an advanced ventilation system with 14 air-intake and extraction channels that can be used with or without air-intake covers (available separately). The BELL RS7 helmet double screen anti-fog (DSAF) visor and rubber gasket seal ensured air, water and dust will not enter the eye port. Beautiful Bell RS7 Colors in All the Right Sizes Solid colors: White, Matte Black Graphics colors: Stamina Grey, Stamina Red Sizes: 54cm (6 3/4) to 61cm+ (7 5/8) Bell RS7 Pro Auto Racing Helmet Details: Manufacturer: Bell Racing Helmets Manufacturer part no.: 1310Axx Snell SA2020 and FIA 8859-2015 certified Lightweight carbon composite shell Advanced multi-density, multi piece liner maximizes energy absorption and impact performance Optical-grade injection molded Double Screen Anti-Fog (DSAF) visor Powerful top and chin bar ventilation system with 14 air channels Shell and shield design optimized for aerodynamic performance Integrated interior channels for drink tube and radio systems Air intake, side-air extractors, rear spoiler, top- and chin-bar gurneys available Top-air attachments available for use with external cooling systems Factory-installed HANS posts Synthetic rubber gasket seal prevents dirt and water entering the helmet Shield and pivot kit: SE07, SV(SE07) Additional SE07 shields for the Bell RS7 Pro helmet available here. In the Box of the Bell RS7 Pro: Bell RS7 Pro SA2020 auto racing helmet Clear SE07 DSAF shield Draw string Bell helmet bag HANS post anchors installed This helmet will ship with signature required for delivery.